M9300A KEYSIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
M9300A PXIe Frequency Reference Data Sheet
application development environment of choice. multiple drivers and programmatic interfaces. Figure 1. M9300A PXIe Frequency Reference inserted in slot 10, above, can be shared with four M9393A PXIe Vector Signal Analyzers in one chassis.
Figure 2. M9300A PXIe frequency reference block diagram.
100 MHz PLL
10 MHz OCXO
100 MHz
10 MHz Out10 MHz
are specifications unless otherwise noted. to as Typical or Nominal values and are italicized. instruments will meet when operated at room temperature. room temperature unless otherwise noted. slots to ensure proper operating temperatures. temperature performance and reliability of test.
04 | Keysight | M9300A PXIe Frequency Reference - Data Sheet Technical Specifications and Characteristics (continued) Reference outputs
100 MHz Out (Out 1 through Out 5)
Amplitude ≥ 10 dBm, 13 dBm, typical Connectors 5 SMB snap-on Impedance 50 Ω, nominal
10 MHz Out
Amplitude 9.5 dBm, nominal Connectors 1 SMB snap-on Impedance 50 Ω, nominal OCXO Out Amplitude 11.5 dBm, nominal Connectors 1 SMB snap-on Impedance 50 Ω, nominal
05 | Keysight | M9300A PXIe Frequency Reference - Data Sheet Technical Specifications and Characteristics (continued) Frequency accuracy Same as accuracy of internal time base or external reference input Internal timebase Accuracy ± (time since last adjustment x aging rate) ± temperature effects ± calibration accuracy Frequency stability - Aging rate Daily < ± .5 ppb/day, after 72 hour warm-up, nominal Yearly < ± .10 ppm/year, after 72 hours warm-up, nominal Total 10 years < ± 0.6 ppm/10yrs, after 72 hours warm-up, nominal Achievable initial calibration accuracy (at time of shipment) ± 5 x 10 -8 Frequency stability - Temperature effects 20 to 30 °C < ± 10 ppb, nominal Full temperature range < ± 50 ppb, nominal Frequency stability - warm up 5 minutes over +20 to +30 °C, with respect to 1 hour < ± 0.1 ppm, nominal 15 minutes over +20 to +30 °C, with respect to 1 hour < ± 0.01 ppm, nominal External reference input Frequency 1 MHz to 110 MHz, sine wave Lock range ± 1 ppm, nominal Amplitude 0 to 10 dBm, nominal Connector 1 SMB snap-on Impedance 50 Ω, nominal
06 | Keysight | M9300A PXIe Frequency Reference - Data Sheet Technical Specifications and Characteristics (continued) Environmental and physical specifications Temperature Operating Non-Operating (Storage) 0 to 55 °C –40 to +70 °C Humidity 1 Type tested at 95%, +40 °C (non-condensing) Altitude Up to 15,000 feet (4,572 meters) EMC Complies with European EMC Directive 2004/108/EC – IEC/EN 61326-2-1 – CISPR Pub 11 Group 1, class A – AS/NZS CISPR 11 – ICES/NMB-001 This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme a la norme NMB-001 du Canada. Warm-up time 30 minutes Size 1 PXIe slot Dimensions Length 210 mm, Width 22 mm, Height 130 mm Weight 0.551 kg (1.215 lbs) Power drawn from chassis ≤ 18 W System requirements Operating systems Windows 7 (32-bit and 64-bit) Processor speed 1 GHz 32-bit (x86), 1 GHz 64-bit (x64) (no support for Itanium 64) Available memory 4 GB minimum
8 GB or greater recommended
Available disk space 2 1.5 GB available hard disk space, includes: – 1 GB available for Microsoft .NET Framework 3.5 SP1 – 100 MB for Keysight IO Libraries Suite Video Support for DirectX 9 graphics with 128 MB graphics memory recommended (Super VGA graphics is supported) Browser Microsoft Internet Explorer 7.0 or greater 1. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of Storage, Transportation and End-use; those stresses include but are not limited to temperature, humidity, shock, vibration, altitude and power line conditions. Test Methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3. 2. NET framework runtime components are installed by default with Windows 7. Therefore, you may not need this amount of available disk space.
07 | Keysight | M9300A PXIe Frequency Reference - Data Sheet Software Instrument connection software Keysight IO Library The Suite offers a single entry point for connection to the most common instruments including AXIe, PXI, GPIB, USB, Ethernet/LAN, RS-232, and VXI test instruments from Keysight and other vendors. It automatically discovers interfaces, chassis, and instruments. The graphical user interface allows you to search for, verify and update IVI instrument and soft front panel drivers for modular and traditional instruments. The Suite safely installs in side-by-side mode with NI I/O software. Free software download at www.keysight.com/find/iosuite Module setup and usage Keysight Soft Front Panel The PXI module includes a Soft Front Panel (SFP), a software-based Graphical User Interface (GUI) which enables the instrument’s capabilities from your PC. Included on CD-ROM shipped with module or online Programming Driver Development environments lVI-COM IVI-C LabVIEW MATLAB Visual Studio (VB.NET, C#, C/C++) VEE LabVIEW, LabWindows/CVI, MATLAB Included on CD-ROM shipped with module or online Programming assitance Command Expert Assists in finding the right instrument commands and setting correct parameters. A simple interface includes documentation, examples, syntax checking, command execution and debug tools to build sequences for integration in Excel, MATLAB, Visual Studio, LabVIEW, VEE, SystemVue. Free software download at www.keysight.com/find/commandexpert Calibration and traceability Factory Calibration The M9300A PXIe Frequency Reference ships factory calibrated with an ISO- 9002, NIST-traceable calibration certificate. Included in base configuration Calibration Cycle A one year calibration cycle is recommended Calibration Sites – At Keysight’s Worldwide Service Centers – On-site by Keysight – By self-maintainers More information visit www.keysight.com/find/infoline R1282A Annual Calibration Service – Keysight Calibration – Keysight Calibration + Uncertainties – Keysight Calibration + Uncertainties + Guardbanding – Standards Compliance – ANSI Z540.3-2006, ISO 17025:2005, ANSI Z540-1-1994, ISO 9001:2008 Additional service, not included in the warranty N7800A Calibration and Adjustment Software The M9300A is supported by Keysight’s Calibration and Adjustment Software. This is the same software used at Keysight Service Centers to automate calibration. The software offers compliance tests for ISO 17025:2005, ANSI/NCSL Z540.3-2006, and measurement uncertainty per ISO Guide to Expression of Measurement Uncertainty. Licensed software. For more information, visit www.keysight.com/find/calibrationsoftware Keysight Calibration Status Utility The Keysight Calibration Status utility helps ensure your M9300A is calibrated by managing the calibration interval and providing messages regarding instrument and module calibration status. Included in base configuration
08 | Keysight | M9300A PXIe Frequency Reference - Data Sheet Support Support Core Exchange Program Keysight’s Replacement Core Exchange program allows fast and easy module repairs. A replacement core assembly is a fully functioning pre-calibrated module replacement that is updated with the defective module serial number, allowing the replacement module to retain the original serial number. For qualified self-maintainers in US only Self-Test Utility A self-test utility runs a set of internal tests which verifies the health of the modules and reports their status. Included in base configuration
09 | Keysight | M9300A PXIe Frequency Reference - Data Sheet Configuration and Ordering Information
Ordering Information
M9300A PXIe Frequency Reference Includes: Software, example programs and product information on CD Software Information Supported operating systems Microsoft Windows 7 (32/64-bit) Standard compliant drivers IVI-COM, IVI-C, LabVIEW, MATLAB Supported application development environments (ADE) VisualStudio (VB.NET, C#, C/C++), VEE, LabVIEW, LabWindows/CVI, MATLAB Keysight IO Libraries (version 16.3 or newer) Includes: VISA Libraries, Keysight Connection Expert, IO Monitor Accessories Model Description Y1212A Slot Blocker Kit: 5 modules Y1213A PXI EMC Filler Panel Kit: 5 slots Y1214A Air Inlet Kit: M9018A 18-slot chassis Y1215A Rack Mount Kit: M9018A 18-slot chassis
Related Products
M9393A PXIe Performace Vector Signal Analyzer M9391A PXIe Vector Signal Analyzer M9381A PXIe Vector Signal Generator M9380A PXIe CW Source M9420A PXIe Vector Transceiver M9018A 18-slot PXIe Chassis M9037A PXIe Embedded Controller M9036A PXIe Embedded Controller Advantage services: Calibration Keysight Advantage Services is committed to your success throughout your equipment’s lifetime N7800A Calibration & Adjustment Software
10 | Keysight | M9300A PXIe Frequency Reference - Data Sheet This information is subject to change without notice. © Keysight Technologies, 2012-2017 Published in USA, November 18, 2017 5991-0898EN www.keysight.com www.keysight.com/find/modular www.keysight.com/find/m9300a Evolving Since 1939 Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight. myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.keysight.com/find/emt_product_registration Register your products to get up-to-date product information and find warranty information. Keysight Services www.keysight.com/find/service Keysight Services can help from acquisition to renewal across your instrument’s lifecycle. Our comprehensive service offerings—one- stop calibration, repair, asset management, technology refresh, consulting, training and more—helps you improve product quality and lower costs. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 11 2626 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-9-7-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System