M9379A

M9379A KEYSIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

03 | Keysight | M9379A RF Amplifier - Data Sheet Specifications Definitions Specification (spec.): Warranted performance. All specifications apply at 25 ºC (± 5 ºC) range ambient and module temperature between 28 ºC to 42 ºC as reported by the module, unless otherwise stated, and 45 minutes after the M9379A amplifiers and switches have been turned on1. Specifications include guard bands to account for the expected statistical performance distribution, measurement uncertainties, and changes in performance due to environmental conditions. Typical (typ.): Expected performance of an average unit which does not include guardbands. General characteristics: A general, descriptive term that does not imply a level of performance. Boundary Conditions If the same boundary conditions fall under more than one category in a table, apply the best value. 1. It is needed before using to turn on the amplifiers and switches by PXI VNA firmware, Soft Front Panel or IVI-driver. Refer to the help for more information.

04 | Keysight | M9379A RF Amplifier - Data Sheet Amp1 (Amplifier 1) In-Out Description Specification Typical Forward Gain (Path: Amp, Attenuator: 0 dB)

50 MHz to 1 GHz

3 to 6.5 GHz 6.5 to 12 GHz 12 to 13.5 GHz +19 dB +19 dB +16 dB +7 dB +5 dB +27 dB +25 dB +22 dB +18 dB +14 dB Reverse Gain (Path: Amp, Attenuator: 0 dB) 50 MHz to 13.5 GHz -40 dB Return Loss IN (Path: Amp or Thru, Attenuator: 0 dB) 50 to 100 MHz 100 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5 dB 5 dB 10 dB 6 dB 5 dB 8 dB 11 dB 13 dB 13 dB 9 dB OUT (Path: Amp, Attenuator: 0 dB) 50 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5 dB 8 dB 8 dB 5 dB 8 dB 11 dB 11 dB 10 dB Attenuator Settable Range 0 to 28 dB, 2 dB step Attenuator Accuracy

50 MHz to 9 GHz

9 to 13.5 GHz ±(0.4 + 5% of setting) dB ±(0.2 + 5% of setting) dB ±(0.4 + 5% of setting) dB Isolation (Thru-Out) 50 M to 6.5 GHz

6.5 G to 9 GHz

9 G to 13.5 GHz 30 dB 20 dB 10 dB Noise Figure 50 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 8 dB 9 dB 11 dB [5+10log10(0.3/f)] dB 1 5 dB 7 dB 9 dB Output 1 dB Compression (P1dB) 50 to 100 MHz

100 MHz to 4 GHz

4 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 17 dBm 17.5 dBm 16 dBm 14 dBm 12 dBm 19 dBm 19.5 dBm 18.5 dBm 17 dBm 16 dBm 1. f in GHz

05 | Keysight | M9379A RF Amplifier - Data Sheet Amp1 (Amplifier 1) continued In-Out Description Specification Typical Saturated Output Power (Psat) 50 to 100 MHz 4 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 21 dBm 21.5 dBm 20.5 dBm 19 dBm 18 dBm Output Intercept Point (OIP3) 1 50 M to 13.5 GHz 20 dBm Harmonics (2nd and 3rd) 50 M to 13.5 GHz, +10 dBm output <-20 dBc Gain Temperature Coefficient (Attenuator: 0 dB) 50 MHz to 6.5 GHz 6.5 to 13.5 GHz -0.06 dB/ °C -0.08 dB/ °C Thru-Out Description Specification Typical Return Loss OUT (Path: Thru), Thru (Path:Thru) 50 to 100 MHz 100 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 3 dB 5 dB 10 dB 8 dB 5 dB 8 dB 11 dB 13 dB 13 dB 9 dB THRU (Path: Amp) 50 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 12 GHz 12 to 13.5 GHz 5 dB 10 dB 8 dB 5 dB 3 dB 8 dB 13 dB 11 dB 8 dB 6 dB Insertion Loss (Path: Thru) 50 to 100 MHz

100 MHz to 3 GHz

3 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5.5 dB 5 dB 6 dB 7 dB 9 dB 3 dB 3 dB 3.5 dB 4.5 dB 6.5 dB Isolation (In-Out) (Attenuator: 0 dB) 50 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 30 dB 20 dB 10 dB 1. Tested with 10 MHz tone separation

06 | Keysight | M9379A RF Amplifier - Data Sheet Amp2 (Amplifier 2) In-Out Description Specification Typical Forward Gain 3 to 6.5 GHz 6.5 to 12 GHz 12 to 13.5 GHz +19 dB +19 dB +16 dB +9 dB +6 dB +27 dB +25 dB +22 dB +18 dB +17 dB Reverse Gain 50 M to 13.5 GHz -40 dB Return Loss Input 50 to 100 MHz 100 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5 dB 5 dB 10 dB 6 dB 5 dB 8 dB 10 dB 13 dB 10 dB 10 dB Output 50 to 100 MHz

100 MHz to 300 MHz

300 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5 dB 5 dB 10 dB 8 dB 5 dB 8 dB 10 dB 13 dB 11 dB 8 dB Noise Figure 50 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 8 dB 9 dB 11 dB [5+10log10(0.3/f)] dB 1 5 dB 7 dB 9 dB Output 1 dB Compression (P1dB) 50 to 100 MHz 4 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 17.5 dBm 18 dBm 16.5 dBm 15 dBm 12 dBm 19 dBm 20 dBm 19 dBm 18 dBm 16 dBm Saturated Output Power (Psat) 50 to 100 MHz 4 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 21 dBm 22 dBm 21 dBm 20 dBm 18 dBm Output Intercept Point (OIP3) 2 50 MHz to 13.5 GHz 20 dBm Harmonics (2nd and 3rd) 50 MHz to 13.5 GHz <-20 dBc Gain Temperature Coefficient 50 MHz to 6.5 GHz 6.5 to 13.5 GHz -0.06 dB/°C -0.08 dB/°C 1. f in GHz 2. Tested with 10 MHz tone separation

07 | Keysight | M9379A RF Amplifier - Data Sheet Switch Description Specification Typical Insertion Loss (Switch: Path A) 50 to 100 MHz 3 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5.5 dB 5 dB 6 dB 7 dB 9 dB 3 dB 3 dB 3.5 dB 4.5 dB 6.5 dB (Switch: Path B) 50 to 100 MHz 3 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5.5 dB 5 dB 6 dB 8 dB 10 dB 3 dB 3 dB 4 dB 5 dB 7 dB Return Loss Selected Ports and COM 50 to 100 MHz 100 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 3 dB 5 dB 10 dB 8 dB 5 dB 8 dB 8 dB 13 dB 11 dB 6 dB Unselected Ports 50 to 100 MHz 100 to 300 MHz 300 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 5 dB 5 dB 10 dB 8 dB 3 dB 8 dB 10 dB 13 dB 10 dB 10 dB Isolation (Unselected Port to COM) 50 MHz to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 30 dB 20 dB 10 dB

08 | Keysight | M9379A RF Amplifier - Data Sheet Switch and Amp1 (COM to Amp1 OUT) Description Specification Typical Insertion Loss (Amp1: Path THRU, Switch: Path A) 50 to 100 MHz 3 to 6.5 GHz 6.5 to 9 GHz 9 to 12 GHz 12 to 13.5 GHz 8 dB 6 dB 7 dB 8 dB 12 dB 13 dB Forward Gain (Amp1:Path Amp, Attenuator 0 dB, Switch: Path B)

50 MHz to 3 GHz

3 to 6.5 GHz 6.5 to 9 GHz 9 to 12 GHz 12 to 13.5 GHz 22 dB 18 dB 13 dB 11 dB 7 dB Noise Figure (Amp1:Path Amp, Attenuator 0 dB, Switch: Path B) 50 to 300 MHz

300 MHz to 4 GHz

4 to 6.5 GHz 6.5 to 9 GHz 9 to 13.5 GHz 11 dB 12 dB 14 dB 18 dB [8+10log10(0.3/f)] dB 1 8 dB 9 dB 12 dB 16 dB 1. f in GHz Status M9379A Out Thru A B In Com Sync In Out Atten Path Switch Amp1 Amp2 IN THRU A B IN OUT COM OUT M9378-61606M9379-61603 (The connectors are connected with the furnished cables. Amp1 THRU - Switch A: M9378-61606, Amp 1 IN – Switch B: M9379-61603)

09 | Keysight | M9379A RF Amplifier - Data Sheet General Characteristics Front Panel Connector Description Connector Type Typical Amp 1 IN Amp 1 OUT, THRU Switch A Switch B Amp 2 IN, OUT Sync SMA female 3.5 mm female 3.5 mm female SMA female 3.5 mm female SMB male Damage Level 3.5 mm and SMA Port Hot Switching +30 dBm or ±35 VDC +20 dBm Isolation1 Description Specification Typical Between Amp 1 and Switch 50 MHz to 8.5 GHz 8.5 to 13.5 GHz 120 dB 110 dB Between (Amp 1+Switch) and Amp2 50 MHz to 8.5 GHz 8.5 to 13.5 GHz 140 dB 130 dB Miscellaneous Description General characteristics Dimensions 210 mm x 22 mm x 130 mm Weight (net) 550 g Power drawn from chassis 14.7 W max. +3.3V: 0.71 A +5 V: 0 A +12 V: 1.025 A -12 V: 0 A Warm up time 45 minutes2 1. The unused ports are terminated with 50 Ω 2. Not only chassis power-on but also turning on the amplifiers by software (PXI VNA firmware, soft front panel or IVI-driver) are required. Refer to the help for more information.

10 | Keysight | M9379A RF Amplifier - Data Sheet General Characteristics continued EMC, safety, environment and compliance Description Specification EMC European Council Directive 2014/30/EC IEC 61326-1:2012 EN 61326-1:2013 CISPR 11:2009 +A1:2010 EN 55011: 2009 +A1:2010 Group 1, Class A IEC 61000-4-2:2008 EN 61000-4-2:2009 4 kV CD / 8 kV AD IEC 61000-4-3:2006 +A1:2007 +A2:2010 EN 61000-4-3:2006 +A1:2008 +A2:2010 3 V/m, 80-1000 MHz, 1.4 - 2.0 GHz / 1V/m, 2.0 - 2.7 GHz, 80% AM IEC 61000-4-4:2004 +A1:2010 EN 61000-4-4:2004 +A1:2010 2 kV power lines / 0.5 kV signal lines IEC 61000-4-5:2005 EN 61000-4-5:2006 1 kV line-line / 2 kV line-ground IEC 61000-4-6:2008 EN 61000-4-6:2009 3 V, 0.15-80 MHz, 80% AM IEC 61000-4-8:2009 EN 61000-4-8:2010 30A/m, 50/60Hz IEC 61000-4-11:2004 EN 61000-4-11:2004 ICES-001:2006 Group 1, Class A AS/NZS CISPR11:2004 Group 1, Class A KN11, KN61000-6-1 and KN61000-6-2 Group 1, Class A Environment This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that you must not discard this electrical/electronic product in domestic household waste. Product Category: With reference to the equipment types in the WEEE Directive Annex I, this product is classed as a “Monitoring and Control instrumentation” product. Do not dispose in domestic household waste. To return unwanted products, contact your local Keysight office, or see http://www.keysight.com/ environment/product/ for more information.

11 | Keysight | M9379A RF Amplifier - Data Sheet General Characteristics continued Analyzer environmental specifications Operating environment General characteristics Temperature Humidity Altitude Vibration 0 to 55 °C ambient 0 to 55 °C module temperature 20% to 80% at wet bulb temperature < +29 °C (non-condensation) 0 to 2,000 m (0 to 6561 feet)

0.21 G maximum, 5 Hz to 500 Hz

Non-operating environment General characteristics Temperature Humidity Altitude Vibration -40 °C to +70 °C 20% to 90% at wet bulb temperature < +40 °C (non-condensation) 0 to 4,572 m (0 to 15,000 feet)

0.5 G maximum, 5 Hz to 500 Hz

A B In Com Sync In Out 19.9 82.6 69.3 42.6 29.3 62.6 14.4 5.6 4.3 34.5 9.9 130

12 | Keysight | M9379A RF Amplifier - Data Sheet This information is subject to change without notice. © Keysight Technologies, 2017 Published in USA, December 1, 2017 5992-1795EN www.keysight.com For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 11 2626 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-9-7-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System Evolving Since 1939 Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight. myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.keysight.com/find/emt_product_registration Register your products to get up-to-date product information and find warranty information. Keysight Services www.keysight.com/find/service Keysight Services can help from acquisition to renewal across your instrument’s lifecycle. Our comprehensive service offerings—one- stop calibration, repair, asset management, technology refresh, consulting, training and more—helps you improve product quality and lower costs. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience.