M9080B KEYSIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
– Perform LTE plus LTE-Advanced FDD and TDD base station (eNB) and user equipment (UE) transmitter tests – Accelerate measurements with one-button RF conformance tests as defined by 3GPP TS 36.141 and 36.521 specification – Analyze carrier-aggregated signal of up to 5 contiguous/non-contiguous component carriers – PC-based SCPI remote interface and manual user interface – Leverage built-in, context-sensitive help with SCPI command reference – Transportable license supports up to four PXI VSA channels in one mainframe Keysight Technologies M9080B & M9082B LTE & LTE-Advanced FDD/TDD X-Series Measurement Applications for PXIe Vector Signal Analyzers Technical Overview
are few differences on the higher layers. and the earliest deployed technologies of LTE-Advanced. Table 1. Physical layer comparisons of LTE and LTE-Advanced FDD/TDD
1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, 20 MHz
5 MHz, 10 MHz, 15 MHz, 20 MHz
With the LTE/LTE-Advanced FDD and TDD measurement applications, you can perform RF transmitter measure - ments on eNB and UE devices in time, frequency, and modulation domains. Measurement setups are simpli - fied with automatic detection of downlink channels and signals. For eNB conformance testing, measurement is simplified by recalling E-TM presets according to 3GPP TS 36.141 specification. For LTE-Advanced demodulation measurements, such as EVM and frequency error, the measurement application uses an automatic sequencing function, instead of a single wideband capture of the multi-carrier signal, eliminat - ing the need for the wide analysis bandwidth option on the signal analyzer and thereby reducing the overall test equipment cost. The measured results of up to 5 CCs for LTE-Advanced can be viewed side-by-side and represent - ed in multiple domains such as resource block, sub-car - rier, slot, or symbol. Graphical displays with color coding and marker coupling allows you to search for problems faster and troubleshoot the found problems quicker. For manufacturing, “conformance EVM” measurement pro - vides significant speed improvement over the traditional EVM measurement. In addition, the measurement applications allow you to test beyond physical layer by using the transport layer decoding functionality. Troubleshoot transport layer prob - lems and verify the channel encoding is correct by access - ing data at different points in the receiver chain such as demapped, deinterleaved, descrambled, deratematched, and decoded data. For unwanted emissions, 3GPP Release 11 adds LTE- Advanced RF conformance requirements for intra-band, non-contiguous carrier aggregation because the spectrum in the sub-block gap can be deployed by another service provider, perhaps using a different technology. These new RF requirements are cumulative adjacent channel leakage power (CACLR), to measure the contributions from car - riers on both sides of the sub-block gap, and cumulative spectrum emissions mask (SEM) measurement where a new special limit mask is defined for unwanted emissions within a sub-block gap calculated as the cumulative sum of contribution from each sub-block. The LTE-Advanced embedded measurement application provides limits for both CACLR and SEM in non-contiguous carrier aggrega - tion. Choosing between X-Series embedded applications and 89600 VSA software X-Series measurement applications provide format-specific, one-button measurements for X-Series analyzers and modular PXI VSAs. With fast measurement speed, SCPI programmability, pass/fail testing and simplicity of operation, these applications are ideally suited for design verification and manufacturing. The 89600 VSA is the industry-leading measurement software for evaluating and troubleshooting signals for R&D and design validation. Supporting numerous measurement platforms and multiple measurement channels, the 89600 VSA provides flex - ibility and sophisticated measurements tools essential to find and fix signal problems. Recent enhancements for the modular PXI VSA platforms (89601B-SSA) provide fast spectrum measurements with benchtop analyzer SCPI programming compatibility. www.keysight.com/find/89600_vsa
Table 2. Required base station (eNB) RF transmitter measurements and the corresponding measurements
6.3.2 Total power dynamic range E-TM 2
6.4 Transmit ON/OFF power
6.5.1 Frequency error E-TM 2
6.6.2 Adjacent channel leakage
6.6.2.6 Cumulative ACLR
6.6.3 Operating band unwanted
6.6.3 Cumulative mask for SEM
6.6.4 Transmitter spurious emis -
- All of the measurements are available for single carrier (LTE) or multiple-carrier LTE-Advanced with up to 5 component carriers. M9080B/
M9082B option 1FP is LTE, option 2FP is LTE-Advanced.
- These are pre-demodulation channel power measurements. Channel power reading is also available after demodulation under “Error Sum -
- For M9080B/M9082B, these measurements are available under “Error Summary” trace in Mod Analysis as well as under “Conformance
EVM” measurement. For 89600, they are available under “Error Summary” trace.
- For LTE-Advanced, this measurement is supported for contiguous carrier aggregation and requires analysis bandwidth on PXI VSA wide
enough to cover the aggregated bandwidth.
- “MIMO Summary”/”MIMO Info Table” traces are used to measure TAE for MIMO and Tx diversity signals. For carrier aggregation, time offset
antenna port using UL RMC (same as LTE), so the applications can also be used for UL-MIMO RF conformance test.
Table 3. Required user equipment (UE) RF transmitter measurements and the corresponding measurements
- These values are found in “Error Summary” table under Mod Analysis measurement or under Conformance EVM measurement for M9080B
- These measurements are part of the Mod Analysis measurement. Once in Mod Analysis, they are found under [Trace/Detector] -> {Data} >
- This measurement is part of the Mod Analysis measurement. Once in Mod Analysis, it is found under [Trace/Detector] -> {Data} > {Response}.
Table 4. List of eNB measurements provided by M9080B and M9082B measurement applications able for multiple carriers with up to 5 component carriers.
Table 4. List of eNB measurements provided by M9080B and M9082B measurement applications (continued)
Table 5. List of UE measurements provided by M9080B and M9082B measurement applications
Table 5 continued. List of UE measurements provided by M9080B and M9082B measurement applications Response: Equalizer channel frequency response Instantaneous equalizer channel frequency response Equalizer channel frequency response difference Instantaneous equalizer channel frequency response difference Equalizer impulse response -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Equalizer channel frequency response per slot -- -- -- -- Channel power -- -- -- -- ACP -- -- -- -- Transmit on/off power -- -- -- -- Spectrum emission mask (SEM) -- -- -- -- Spurious emissions -- -- -- -- Occupied bandwidth -- -- -- -- CCDF -- -- -- -- Monitor spectrum -- -- -- -- I/Q waveform -- -- -- --
Supported devices and standards Device type LTE FDD/TDD M9080B-1FP/ M9082B-1FP LTE-Advanced FDD/TDD M9080B-2FP/ M9082B-2FP 3GPP standards supported 36.211 V9.1.0 (March 2010) 36.212 V9.4.0 (September 2011) 36.213 V9.3.0 (September 2010) 36.214 V9.2.0 (June 2010) 36.141 V9.10.0 (July 2012) 36.521-1 V9.8.0 (March 2012) 36.211 V10.7.0 (March 2013) 36.212 V10.7.0 (December 2012) 36.213 V10.9.0 (March 2013) 36.214 V10.12.0 (March 2013) 36.141 V11.4.0 (March 2013) 36.521-1 V10.5.0 (March 2013) Signal structure FDD Frame Structure Type 1 TDD Frame Structure Type 2 Special subframe configurations 0-8 FDD Frame Structure Type 1 TDD Frame Structure Type 2 Special subframe configurations 0-8 Signal direction Uplink and downlink UL/DL configurations 0-6 Uplink and Downlink UL/DL configurations 0-6 Signal bandwidth 1.4 MHz (6 RB), 3 MHz (15 RB),
5 MHz (25 RB), 10 MHz (50 RB),
15 MHz (75 RB), 20 MHz
(100 RB) Bandwidth per component carrier: 1.4 MHz (6 RB), 3 MHz (15 RB),
15 MHz (75 RB), 20 MHz (100
RB) Number of compo- nent carriers 1 1, 2, 3, 4, or 5 Physical signals Downlink PBCH, PCFICH, PHICH, PDCCH, PDSCH, PMCH Uplink PUCCH, PUSCH, PRACH Physical channels Downlink P-SS, S-SS, C-RS, UE-RS, P-PS (positioning), MBSFN-RS P-SS, S-SS, C-RS, UE-RS, P-PS (positioning), MBSFN-RS, CSI-RS Uplink PUCCH-DMRS, PUSCH-DMRS, S-RS (sounding) PUCCH-DMRS, PUSCH-DMRS, S-RS (sounding) For a complete list of specifications, please refer to the M9391A data sheet, literature number 5991- 2603EN. Performance specifications Description M9391A PXI VSA, nominal Demodulation LTE FDD E-TM, 10 MHz BW, 2 GHz -52 dB LTE FDD E-TM, 10 MHz BW, <1 GHz -51 dB LTE TDD E-TM, 10 MHz BW, 2 GHz -49 dB LTE TDD E-TM, 10 MHz BW, <1 GHz -50 dB Adjacent Channel Power Adjacent channel -64.9 dB Alternate channel -66.4 dB Definitions – Specifications describe the per - formance of parameters covered by the product warranty. – The specifications apply to single carrier case only, unless other - wise stated. – 95th percentile values indicate the breadth of the population (≈2σ) of performance tolerances expected to be met in 95% of cases with a 95% confidence. These values are not covered by the product warranty. – Typical values are designated with the abbreviation "typ." These are performance beyond specification that 80% of the units exhibit with a 95% con - fidence. These values are not covered by the product warranty. – Nominal values are designated with the abbreviation "nom." These values indicate expected performance, or describe prod - uct performance that is useful in the application of the product, but is not covered by the product warranty. Note: Data subject to change
Ordering Information
Transportable, perpetual license This allows you to run the application using an embedded PXI PC controller or external PC, plus it may be transferred from one controller or PC to another. One software license supports up to four modular PXI VSA channels in one PXI mainframe. M9080B LTE/LTE-Advanced FDD measurement application Model-Option Description Additional information M9080B-1TP LTE FDD measurement application, transportable perpetual license M9080B-2TP LTE-Advanced FDD measurement application, transportable perpetual license Requires 1TP Note: M9080B application requires Windows 7 operating system. M9082B LTE/LTE-Advanced TDD measurement application Model-Option Description Additional information M9082B-1TP LTE TDD measurement application, transportable perpetual license M9082B-2TP LTE-Advanced TDD measurement application, transportable perpetual license Requires 1TP Note: M9082B application requires Windows 7 operating system. Hardware Configuration M9391A PXIe vector signal analyzer configuration Model-Option Description Notes M9391A-F03, -F06 3 GHz or 6 GHz frequency range One required M9391A-B04, -B10, or -B16 40 MHz, 100 MHz or 160 MHz analysis bandwidth One required. -B16 recommended for fast - est spectrum measurements with 89600 VSA software Option SSA. M9391A-300 PXIe frequency reference Recommended. M9391A-UNZ Fast tuning Recommended. Highly recommended for fastest spectrum measurements with 89600 VSA soft - ware Option SSA. M9391A-M01, -M05, or -M10 Memory options (512 MB, 2 GB, or 4 GB) Recommend 1 Gsa/4 GB memory Try before you buy! Free 30-day trials of X-Series measurement applications provide unrestricted use of each application’s features and functionality on your modular PXI VSA. See www.keysight.com/find/M90XA for more information. You can upgrade! Options can be added after your initial purchase. All of our X-Series ap - plication options are license-key upgradeable.
– N9080B LTE/LTE-Advanced FDD Measurement Application Measurement Guide, Part Number N9080-90008 – N9082B LTE/LTE-Advanced TDD Measurement Application Measurement Guide, Part Number N9082-90004 – 3GPP Long Term Evolution: System Overview, Product Devel - opment, and Test Challenges, Application Note , Literature Number 5989-8139EN – Introducing LTE-Advanced, Application Note , Literature Number 5990-6706EN – Stimulus-Response Testing for LTE Components, Application Note, Literature Number 5990-5149EN – Measuring ACLR Performance in LTE Transmitters, Application Note, Literature Number 5990-5089EN – TD-LTE E-UTRA Base Station Transmit ON/OFF Power Mea - surement Using a Keysight X-Series Signal Analyzer, Applica - tion Note, Literature Number 5990-5989EN – User’s and Programmer’s Reference Guide is avail - able in the library section of the N9080A, W9080A, N9082A and W9082A product pages. – M9391A Data Sheet, Literature Number 5991-2603EN – X-Series Measurement Applications for Modular Instruments Brochure, Literature Number 5991-2604EN Web – Product pages: www.keysight.com/find/M9080B www.keysight.com/find/M9082B – X-Series measurement applications: www.keysight.com/find/M90XA – M9391A PXIe vector signal analyzer www.keysight.com/find/M9391A – M9393A PXIe performance vector signal analyzer www.keysight.com/find/M9393A – X-Series signal analyzers: www.keysight.com/find/X-Series – Application pages: www.keysight.com/find/lte www.keysight.com/find/lteadvanced M9393A PXIe performance vector signal analyzer configuration Model-Option Description Notes M9393A-F08, -F14, -F18, or -F27
8 GHz, 14 GHz, 18 GHz, or 27 GHz frequency range One required
M9393A-B04, -B10, or -B16 40 MHz, 100 MHz or 160 MHz analysis bandwidth One required. -B16 recommended for fast - est spectrum measurements with 89600 VSA software Option SSA. M9393A-300 PXIe frequency reference Recommended M9393A-UNZ Fast tuning Recommended. Highly recommended for fastest spectrum measurements with 89600 VSA soft - ware Option SSA. M9393A-M01, -M05, or -M10 Memory options (512 MB, 2 GB, or 4 GB) Recommend 1 Gsa/4 GB memory
www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. www.keysight.com/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. PICMG and the PICMG logo, CompactPCI and the CompactPCI logo, AdvancedTCA and the AdvancedTCA logo are US registered trademarks of the PCI Industrial Computers Manufacturers Group. “PCIe” and “PCI EXPRESS” are registered trademarks and/or service marks of PCI-SIG. www.keysight.com/find/modular www.keysight.com/find/M90XA For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 0800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-07-10-14) 16 | Keysight | M9080B & M9082B LTE & LTE-Advanced FDD/TDD - Technical Overview This information is subject to change without notice. © Keysight Technologies, 2014 Published in USA, August 4, 2014 5991-4610EN www.keysight.com