M81713FP

M81713FP POWEREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 HVIC High Voltage Half-Bridge Driver

600 Volts/±500mA

Description: M81713FP is a high voltage Power MOSFET and IGBT driver for half-bridge applications. Features: £ Shoot Through Interlock £ Output Current ±500mA £ Half-Bridge Driver £ SOP-8 Package £ Internal Dead Time - Fixed Applications: £ HID Ballast £ PDP £ MOSFET Driver £ IGBT Driver £ Inverter Module Control Ordering Information: M81713FP is a ±500mA,

600 Volt HVIC, High Voltage

Outline Drawing and Circuit Diagram RECOMMENDED MOUNT PAD A C D E S T R H J N L M Q P B E F G K DETAIL "A" DETAIL "A" DETAIL "B" DETAIL "B" 1 4 PIN NUMBER

1 VCC 8 VB

2 IN 7 HO

3 GND 6 VS

4 LO 5 NC

S R Q R IN 2 VREG VREG/VCC LEVEL SHIFT VS VCC GND VB LO4 HO7 Ponr UV DETECT FILTERPonr Dimensions Inches Millimeters D 0.08 Max. 1.9 Max. E 0.05 1.27 G 0.004 0.1 H 0.06 1.5 J 0.002 Min. 0.05 Min. Dimensions Inches Millimeters K 0.04 0.9 N 10° Max. 10° Max. P 0.03 0.745 Q 0.023 0.595 R 0.05 Min. 1.27 Min. S 0.23 5.72 T 0.76 0.76

HVIC, High Voltage Half-Bridge Driver Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 2 7/05 Absolute Maximum Ratings, Ta = 25°C unless otherwise specified Characteristics Symbol M81713FP Units High Side Floating Supply Absolute Voltage VB -0.5 ~ 624 Volts High Side Floating Supply Offset Voltage VS VB-24 ~ VB+0.5 Volts High Side Floating Supply Voltage (VBS = VB – VS) VBS -0.5 ~ 24 Volts High Side Output Voltage VHO VS-0.5 ~ VB+0.5 Volts Low Side Fixed Supply Voltage VCC -0.5 ~ 24 Volts Low Side Output Voltage VLO -0.5 ~ VCC+0.5 Volts Logic Input Voltage VIN -0.5 ~ VCC+0.5 Volts Allowable Offset Voltage Transient dVs/dt ±50 V/ns Package Power Dissipation (Ta = 25°C, On Board) Pd 0.6 Watts Linear Derating Factor (Ta > 25°C, On Board) Kθ 6.0 mW/°C Junction to Case Thermal Resistance Rth(j-c) 50 °C/W Junction Temperature Tj -20 ~ 150 °C Operation Temperature Topr -20 ~ 125 °C Storage Temperature Tstg -40 ~ 150 °C Recommended Operating Conditions Characteristics Symbol Test Conditions Min. Typ. Max. Units High Side Floating Supply Absolute Voltage V B VS+10 — V S+20 Volts High Side Floating Supply Offset Voltage V S VB > 10V -5 — 500 Volts High Side Floating Supply Voltage VBS V B = VB – VS 10 — 20 Volts High Side Output Voltage VHO VS — V B Volts Low Side Fixed Supply Voltage VCC 10 — 20 Volts Logic Supply Voltage VLO 0 — V CC Volts Logic Input Voltage VIN 0 — V CC Volts Electrical Characteristics, Ta = 25°C, VCC = VBS (= VB – VS) = 15V unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Floating Supply Leakage Current IFS VB = VS = 600V — — 1.0 µA VBS Standby Current IBS IN = 0V — 0.2 0.5 mA VCC Standby Current ICC IN = 0V 0.2 0.5 0.75 mA High Level Output Voltage VOH IO = 0A, LO, HO 13.8 14.4 — Volts Low Level Output Voltage VOL IO = 0A, LO, HO — — 0.1 Volts High Level Input Threshold Voltage VIH HIN, LIN 2.1 3.0 4.0 Volts Low Level Input Threshold Voltage VIL HIN, LIN 0.6 1.5 2.0 Volts High Level Input Bias Current IIH VIN = 5V — 25 75 µA Low Level Input Bias Current IIL VIN = 0V — — 1.0 µA VBS Supply UV Reset Voltage VBSuvr 8.0 8.9 9.8 Volts VBS Supply UV Hysteresis Voltage VBSuvh 0.5 0.7 — Volts VBS Supply UV Filter Time tVBSuv — 7.5 — µs VCC Supply UV Reset Voltage VCCuvr 8.0 8.9 9.8 Volts VCC Supply UV Hysteresis Voltage VCCuvh 0.5 0.7 — Volts

HVIC, High Voltage Half-Bridge Driver Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Electrical Characteristics, Ta = 25°C, VCC = VBS (= VB – VS) = 15V unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units VCC Supply UV Filter Time tVCCuv — 7.5 — µs Output High Level Short Circuit Pulsed Current I OH VO = 0V, PW < 10µs — -500 — mA Output Low Level Short Circuit Pulsed Current I OL VO = 15V, PW < 10µs — 500 — mA Output High Level ON Resistance ROH I O = -200mA, ROH = (VOH – VO)/IO — 30 — Ω Output Low Level ON Resistance ROL IO = 200mA, ROL = VO /IO — 12 — Ω Dead Time LO Turn-Off to HO Turn-ON and t DEAD C L = 1000pF between HO – VS, LO-GND 0.5 — 1.0 µs HO Turn-Off to LO Turn-On Power On Reset Voltage VPonr — — 6 Volts Power On Reset Filter Time tPonr(FIL) 300 — — ns Turn-On Propagation Delay tdLH C L = 1000pF between HO – VS, LO – GND 0.6 0.9 1.2 µs Turn-Off Propagation Delay tdHL C L = 1000pF between HO – VS, LO – GND 0.1 0.15 0.2 µs High Side Turn-On Rise Time trH C L = 1000pF between LO – GND — 75 180 ns High Side Turn-Off Fall Time tfH C L = 1000pF between LO – GND — 75 180 ns Low Side Turn-On Rise Time trL C L = 1000pF between LO – GND — 75 180 ns Low Side Turn-Off Fall Time tfL C L = 1000pF between LO – GND — 75 180 ns 0.2 0.1 0.6 0.5 0.7 THERMAL DERATING FACTOR CHARACTERISTICS TEMPERATURE, Ta, (°C) PACKAGE POWER DISSIPATION, Pd, (WATTS) 0 25 7 5 100 150125 0.3 0.4 1. Input/Output Logic HO has positive logic with reference to IN. LO has negative logic with reference to IN. 2. Logic During UV (VCC, VBS) Error 3. Allowable Supply Voltage Transient It is recommended supplying VCC first and VBS second. In the case of shutting off supply voltage, it is recommended to shut off VBS first and VCC second. At the time of starting, VCC and VBS, the power supply should be increased slowly (below 50V/µs). If it is increased rapidly, output signal (HO or LO) may be “H”. Error Signal HO LO UV Error (VCC)* UV Error (VBS) HO outputs “L” level as long as UV error for VCC is detected. HO responds to IN if VCC exceeds VCC UV reset level. LO is locked at “L” as long as UV error for VCC is detected. After VCC exceeds VCC UV reset level, the lock for LO is removed and responds to IN signal. HO is locked at “L” as long as UV error for VBS is detected. After VBS exceeds VBS UV reset level, the lock for HO is removed following an “L” state of the IN signal, and then HO responds to the input. *If UV error for VCC is detected when HO is in “H” level and the falling speed for VCC exceeds 0.03V/µm, the OFF signal for HO might not be transimitted from low side to high side and then HO stays “H”. LO is independent of VBS to respond to IN.

HVIC, High Voltage Half-Bridge Driver Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 4 7/05 INPUT/OUTPUT TIMING DIAGRAM UV SEQUENCE Ponr (Power-On-Reset) SEQUENCE IN 50% 50% 90% 90% 10%10% 90% 10% 90% 10% HO LO tfL tdHL tdLH tDEAD VCC tVCCuv tVBSuv tVCCuv VPonr VPonr VPonr VB IN UV RESET UV TRIP UV RESET UV TRIP UV TRIP UV RESET UV TRIP UV TRIP UV RESET UV RESET tVCCuv tPonr (FIL) tPonr (FIL)VPonr VPonr VPonr UV RESET UV TRIP UV RESET UV TRIP UV TRIP UV RESET UV TRIP UV TRIP UV RESET UV RESET HO LO VCC VB IN HO LO tdHL tdLH tDEAD trH trLtfH