C6536 HAMAMATSU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Multichannel measurement unit Peripheral devices for NMOS multichannel detector head To facilitate multichannel measurement and data analysis, Hamamatsu provides a complete line of NMOS multichannel detector head and peripheral devices including a data processing unit and interface board for connection to a PC. C6536, M7089 I Typical connections of NMOS multichannel detector head to peripheral devices CABLE FOR IMAGE SENSOR (CONNECTORIZED AT BOTH ENDS) A3017 A3017-01 A3017-02 (0.5 m) (1 m) (1.5 m) SIGNAL CABLE A3020 (1.5 m, 2 CABLES) (CONNECTORIZED AT BOTH ENDS) POWER SUPPLY CABLE A3018-01 (1.5 m) OSCILLOSCOPE DATA PROCESSING UNIT C6536 A7094-01 A7094 (2.5 m) (5 m) INTERFACE BOARD M7089 IBM-PC COMPATIBLE COMPUTER HAMAMATSU (CONNECTORIZED AT BOTH ENDS)C8892 G Data processing unit C6536 C6536 converts video signals from an NMOS linear im- age sensor into 12-bit digital signals. C6536 is comprised of a 12-bit A/D converter, memory controller and pulse generator for image sensor. The output signal from an image sensor is A/D converted at high speeds and buffered in the internal memory. By handshaking the internal controller with an external PC, the data can be transferred in parallel according to the PC operating speed. G Interface board M7089 M7089 is an I/O board specifically designed for interface with an IBM PC/A T compatible computer. By installing M7089 into the extension slot of the PC, data can be easily handled between data processing unit C6536 and the PC by 12-bit high-speed transfer. This allows analyz- ing the output of NMOS linear image sensors on the PC and also controlling the NMOS linear image sensor inte- gration time from the PC. KACCC0055EC G Cables Dedicated cables needed to make connections between the NMOS multichannel detector head and peripheral units are available.
Multichannel measurement unit C6536 is a data processing unit designed specifically for Hamamatsu image sensor driver circuits and multichannel detector head s. C6536 is capable of high-speed signal readout and data processing with high resolution so that the fullest performance and characteristics can be obtained from various types of image sensors. Even in high-speed measurements at low light levels, C6536 delivers satisfactory performan ce. The unit is compact yet has shielding effects against external noise. C6536 is also designed for easy operation and data control. C6536 consists of a buffer amplifier, 12-bit A/D converter, memory, controller and pulse generator. The A/D converted data is t emporarily stored in the buffer memory and then transferred in parallel to an external PC by handshaking the internal controller with the PC. Data processing unit C6536
Features
/K6C High resolution: 12 bits /K6C High-speed data conversion: 1 MHz Max. /K6C Lower power consumption /K6C Built-in buffer memory /K6C Compact size START CLK Trigger +5 V (OUT) +15 V (OUT) -15 V (OUT) +5 V (IN) +15 V (IN) -15 V (IN) DT8 TO DT11 DT0 TO DT7 MONITOR OSC. TRIG EXT. TRIG D. GND A. GND D. GND A. GND DATA VIDEO 8 8 88812 444 BUFFER AMPLIFIER PULSE GENERATOR CONTROLLER FIFO MEMORY FIFO MEMORY 12-BIT SAMPLING ADC EOS DTRDY RDCMD RDCTRL P-RESET WRPG DP0 TO DP7 MULTICHANNEL DETECTOR HEAD POWER SUPPLY INTERFACE BOARD I Configuration C6536 consists of the following parts. ➀ Buffer amplifier ➁ Sampling ADC ➂ Buffer memory (FIFO) ➃ Pulse generator ➄ Controller KACCC0142EA I Block diagram
Multichannel measurement unit IIIII Dimensional outline (unit: mm) I Specifications Parameter Value Scan rate 1 MHz Max. Data output 12 bits Data accuracy 11 bits Buffer memory 1024 words Output code Straight binary +15 V 50 mA Max. -15 V 30 mA Max.Input power supply +5 V 200 mA Max. Data input range 0 to 10 V Dimensions 121 (W) × 107 (H) × 40 (D) mm Weight 300 g approx. 96.6 107 121 KACCA0100EA
Multichannel measurement unit M7089 is an interface board specifically designed for connection to the ISA bus in an IBM PC/AT compatible computer, in order t o input or output the control signals and data signals between the PC and C6536 data processing unit. By handshaking the PC with the internal con troller of the data processing unit, 12-bit (or 16-bit) data signals can be transferred in parallel between them. The I/O address can be set from 0000H to 0FFFH (factory preset: 0300H) in 4 byte steps by using the DIP switch on the board. Interface board M7089 /K6C Works with various IBM-PC compatible computer (ISA bus) I Absolute maximum ratings Parameter Value Unit Operating temperature 0 to 50 * 1 °C Storage temperature -20 to 70 *1 °C *1: No condensation. I Specifications Parameter Specification Data bus size 16 bits I/O address Top address setting by rotary switch (factory preset: 0300H) *2 Power supply +5 V ± 5 % Input specifications TTL level input Output specifications TTL driver output Signal extension distance 5 m approx. (depending on wiring conditions) Use connector D-sub 37 pin XM3B-3722-501F equivalent (made by OMRON, socket type) Weight 100 g approx. *2: Do not set in the range between 0000H and 0100H.
Multichannel measurement unit HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K. Cat. No. KACC1065E02 May. 2002 DN I Dimensional outline (unit: mm) I Configuration diagram SW1 SW2 ADDRESS DECODE CONTROLLER DATA BUFFER ISA BUS CONNECTOR DATA SIGNAL: DT CONTROL SIGNAL: DP CONTROL SIGNAL: DTRDY, etc. SW3 SW4 171.1 12.5 9.0 9.2 18.4 21.4 158.0 63.518.5 90.0 51.25 121.0 KACCA0101EA KACCC0144EA