M630 ICST | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
M630 Rev 1.1 Revised 14Nov2003 Integrated Circuit Systems, Inc. ● Communications Modules ● www.icst.com ● tel (508) 852-5400 VOLTAGE CONTROLLED SAW OSCILLATOR Integrated Circuit Systems, Inc. Product Brief M630 GENERAL DESCRIPTION The M630 is a VCSO (Voltage Controlled SAW Oscilla- tor) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) based oscilla- tor and filters deliver output with exceptionally low phase jitter. The M630 is available in a selection of center frequencies in the 10GHz range. The M630 is suitable for phase-locked loop implementations, clock and data recovery circuits, and other timing applications for the telecom and optical fiber networking markets (OC-192/STM-64 with and without Forward Error Correction - FEC).
FEATURES
- VCSO center frequencies from 9.953 to 12.249 GHz (Specify center frequency at time of order)
- Low phase noise -65dBc/Hz @ 1kHz offset
- Single 6.5V power supply
- Small 1.6 x 1.8 inch SMA connector package PIN ASSIGNMENT (1.6 x 1.8 inch SMA) BLOCK DIAGRAM Sample of Available Output Frequencies VCSO Center Frequency1 (GHz) 1. Specify VCSO center frequency at time of order
Applications
9.953 GHz OC-192
10.664 GHz OC-192, OTU2 FEC
12.249 GHz OC-192 FEC
Bandpass Filter Bandpass Filter4x Frequency Multiplier Frequency Multiplier RF_OUT RF Amp M630 Voltage Controlled SAW Oscillator