M57184N-715B POWEREX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Outline Drawing and Circuit Diagram 1Rev. 10/05 1 Dimensions Inches Millimeters A 2.05 Max. 52.0 Max. B 0.95 Max. 24.0 Max. C 0.47 Max. 12.0 Max. D 0.18 Max. 4.5 Max. E 0.10 2.54 Dimensions Inches Millimeters G 1.70 43.18 H 0.16±0.4 4.0±1.0 J 0.3 Max. 7.5 Max. Description: M57184N-715B is a non-isolated step down DC-to-DC converter designed to take direct input of 140 ~ 360 VDC and provide 2 outputs. One output is +15V/350mA and the other is rated at +5V/200mA. This converter allows use of fewer external components than does a combination of electrolytic capacitors and choke coils only. Features: £ Input Voltage Range DC 140V ~ 360V £ Output Specifications 15V, 350mA and 5V, 200mA Applications: £ Power Source for DIP IPMs and ASIPMs £ Home Appliances £ Industrial Controls Ordering Information: M57184N-715B
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 2 Rev. 10/05 Absolute Maximum Ratings, Ta = 25 °C unless otherwise specified Characteristics Symbol Test Conditions M57184N-715B Units Input Voltage VIN – 600 Volts Load Current-1 IL-1 – 350 mA Load Current-2 IL-2 – 200 mA Operating Temperature Topr No Condensation -20 ~ +70 °C Storage Temperature Tstg Allowable -25 ~ +85 °C Electrical Characteristics, VIN = 280V, Ta = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Input Source Voltage VIN Recommended Range 140* 280 360 Volts Output Voltage-1, Pin 10 VO-1 IL-1 = 350mA 14 15 16 Volts Output Voltage-2, Pin 18 VO-2 IL-2 = 200mA 4.7 5.0 5.3 Volts Efficiency η IL-1 = 350mA, IL-2 = 200mA 65 73 — mV p-p Rippple Vp-p IL-1 = 350mA, IL-2 = 200mA — 0.1 0.2 Volts *At input voltages less than 220VAC, IL-1 must be limited to less than 250mA. Application Circuit 10µF 450V x 2 100µF 50V VIN VO-2 1mH IL-2 M57184N-715B16 12 A IL-1 A V VO-1 V 4 14 6 8 220µF 50V
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 3Rev. 10/05 INPUT VOLTAGE, VIN, (VOLTS) EFFICIENCY, η, (%) EFFICIENCY VS. INPUT VOLTAGE CHARACTERISTICS 220 240 260 280 300 360320 340 IL-1 = 350mA IL-2 = 200mA LOAD CURRENT, IL-2, (mA) OUTPUT VOLTAGE, VO-2, (VOLTS) OUTPUT VOLTAGE LOAD CURRENT CHARACTERISTICS (VO-2) 0 100 200 300 4 00 LOAD CURRENT, IL-1, (mA) OUTPUT VOLTAGE, VO-1, (VOLTS) OUTPUT VOLTAGE VS. LOAD CURRENT CHARACTERISTICS (VO-1) 0 200100 500300 400 VIN = 280V IL-2 = 200mA LOAD CURRENT, IL-1, (mA) EFFICIENCY, η, (%) EFFICIENCY VS. LOAD CURRENT CHARACTERISTICS 0 50 100 150 200 300250 350 VIN = 280V IL-2 = 200mA VIN = 280V IL-2 = 200mA INPUT VOLTAGE, (VOLTS) OUTPUT VOLTAGE, VO-1, (VOLTS) OUTPUT VOLTAGE VS. INPUT VOLTAGE CHARACTERISTICS (VO-1) 0 10050 250150 200 RL-1 = 43Ω RL-2 = 25Ω INPUT VOLTAGE, (VOLTS) OUTPUT VOLTAGE, VO-2, (VOLTS) OUTPUT VOLTAGE VS. INPUT VOLTAGE CHARACTERISTICS (VO-2) 0 10050 250150 200 RL-1 = 43Ω RL-2 = 25Ω INPUT VOLTAGE, (VOLTS) INPUT CURRENT, (mA) INPUT CURRENT VS. INPUT VOLTAGE CHARACTERISTICS 160 0 10050 250150 200 120 RL-1 = 43Ω RL-2 = 25Ω AMBIENT TEMPERATURE, (°C) OUTPUT POWER, (VOLTS) DERATING CHARACTERISTICS 8.0 -30 10-10 9030 50 70 6.0 4.0 2.0 0.0
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 4 Rev. 10/05 Inductor for Application Example Circuit 1. Recommended Inductors Manufacturer Part Number Mitsumi C13-FR Series, Type # GA 102 API Delevan 4590-105K J.W. Miller 5900-102 2. Specifications for Inductor We recommend an inductor with these specifications: an inductance of 1mH, rated current of at least 500mA, and good performance with DC superimposition. Please note there must be no magnetic saturation in the inductor. The following waveforms show the output ripple voltage on V O-1 for good versus bad inductors. These waveforms are produced with output VO-2 unloaded and the scope coupling set to AC. GOOD INDUCTOR 50.0mV/div 50.0µsec/div 50.0mV/div 50.0µsec/div BAD INDUCTOR