M236H1-L01

M236H1-L01 CHIMEI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 26

Technical content

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 TFT LCD Tentative Specification MODEL NO.: M236H1- L01 Customer: Approved by: Note: For Reference Only 記錄 工作 審核 角色 投票 2008-05-08 11:23:07 CST PMMD Director cs_lee(李志聖 /56510/44926) DirectorAccept

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 - CONTENTS -

1.1 OVERVIEW

1 . 2 F E A T U R E S 1 . 3 A P P L I C A T I O N 1 . 4 G E N E R A L S P E C I F I C A T I O N S 1 . 5 M E C H A N I C A L S P E C I F I C A T I O N S

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2 . 2 E L E C T R I C A L A B S O L U T E R A T I N G S 2 . 2 . 1 T F T L C D M O D U L E 2 . 2 . 2 B A C K L I G H T U N I T 3. 1.1 TFT LCD MODULE

3.1.2 Vcc Power Dip Condition

3.2 BACKLIGHT UNIT

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5.1 TFT LCD MODULE

5.2 LVDS DATA MAPPING TABLE

5.3 BACKLIGHT UNIT

5.4 COLOR DATA INPUT ASSIGNMENT

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6 . 2 P O W E R O N / O F F S E Q U E N C E

7.1 TEST CONDITIONS

7 . 2 O P T I C A L S P E C I F I C A T I O N S 8 . 1 P A C K I N G S P E C I F I C A T I O N S 8 . 2 P A C K I N G M E T H O D 1 0 . 1 A S S E M B L Y A N D H A N D L I N G P R E C A U T I O N S 1 0 . 2 S A F E T Y P R E C A U T I O N S

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0

REVISION HISTORY

Version Date Section Description Ver 0.0 28,Apr., 08’ M236H1 -L01 Tentative specifications was first issued.

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 1. GENERAL DESCRIPTION M 2 3 6 H 1 - L 0 1 i s a 2 3 . 6 ” T F T L i q u i d C r y s t a l D i s p l a y m o d u l e w i t h 4 C C F L B a c k l i g h t u n i t a n d 3 0 p i n s 2ch-LVDS interface. This module supports 1920 x 1080 Full HD mode and can display up to 16.7M colors. The inverter module for Backlight is not built in.

1.2 FEATURES

• Extra-wide viewing angle. - High contrast ratio. - Fast response time. - High color saturation. - Full HD (1920 x 1080 pixels) resolution. - DE (Data Enable) only mode. - LVDS (Low Voltage Differential Signaling) interface. - RoHS compliance.

1.3 APPLICATION

• TFT LCD Monitor

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 521.28(H) x 293.22(V) (23.6” diagonal) mm Bezel Opening Area 525.22 (H) x 297.22 (V) mm (1) Driver Element a-Si TFT active matrix - - Pixel Number 1920 x R.G.B. x 1080 pixel - Pixel Pitch 0.2715 (H) x 0.2715 (V) mm - Pixel Arrangement RGB vertical stripe - - Display Colors 16.7M color - Transmissive Mode Normally White - - Surface Treatment AG type, 3H hard coating, Haze 25 - -

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note Horizontal(H) 544.3 544.8 545.3 mm Vertical(V) 320.0 320.5 321.0 mm Module Size Depth(D) 18.2 18.7 19.2 mm (1) Weight - - (3025) g - Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 2. ABSOLUTE MAXIMUM RATINGS Value Item Symbol Min. Max. Unit Note Storage Temperature T ST - 2 0 6 0 º C ( 1 ) Operating Ambient Temperature T OP 0 5 0 º C ( 1 ) , ( 2 ) Shock (Non-Operating) S NOP - 5 0 G ( 3 ) , ( 5 ) Vibration (Non-Operating) V NOP - 1 . 5 G ( 4 ) , ( 5 ) Note (1) Temperature and relative humidity range is shown in the figure below. ( a ) 9 0 % R H M a x . ( T a ≦ 4 0 º C ) . ( b ) W e t - b u l b t e m p e r a t u r e s h o u l d b e 3 9 º C M a x . ( T a > 4 0 º C ) . ( c ) N o c o n d e n s a t i o n . Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max. Note (3) 11ms, half sine wave, 1 time for ± X, ± Y , ± Z. Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y , Z. Note (5) At testing Vibration and Shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. The fixing condition is shown as below: Storage Range Relative Humidity (%RH) Operating Range Temperature (ºC) 100 80 60 -20 40 0 20-40 Side Mount Fixing Screw Side Mount Fixing Screw Stage Bracket LCD Module Gap=2mm At Room Temperature

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Value Item Symbol Min. Max. Unit Note Power Supply Voltage Vcc -0.3 +6.0 V (1)

2.2.2 BACKLIGHT UNIT

Value Item Symbol Min. Max. Unit Note Lamp Voltage V L - 2 . 5 K V RMS ( 1 ) , ( 2 ) Lamp Current I L ( 3 . 0 ) ( 7 . 5 ) m A RMS Lamp Frequency F L 4 0 8 0 K H z (1), (2) Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for lamp (Refer to 3.2 for further information).

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE T a = 2 5 ± 2 º C

Value Parameter Symbol Min. Typ. Max. Unit Note Power Supply Voltage Vcc 4.5 5.0 5.5 V - Ripple Voltage V RP - - 1 0 0 m V - Rush Current I RUSH ( 3 ) A ( 2 ) White (0.6) (0.75) A (3)a Black (1.1) (1.3) A (3)b Power Supply Current Vertical Stripe LVDS differential input voltage Vid 100 - 600 mV LVDS common input voltage Vic - 1.2 - V Note (1) The module should be always operated within above ranges. Note (2) Measurement Conditions: (High to Low) (Control Signal) +12V SW 1uF Vcc +5.0V 2SK1470 Q1 2SK1475 47K VR1 47K C2 0.01uF 1uF FUSE (LCD Module Input) Vcc rising time is 470Ps 470Ps Vcc GND 0.9Vcc 0.1Vcc

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, f v = 60 Hz, whereas a power dissipation check pattern below is displayed. Active Area a. White Pattern Active Area c. Vertical Stripe Pattern R R R R R R R R G G G G B B B B B B G G G G B B B B R R Active Area b. Black Pattern

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0

3.2 BACKLIGHT UNIT T a = 2 5 ± 2 º C

Value Parameter Symbol Min. Typ. Max. Unit Note Lamp Input Voltage V L ( 8 4 6 ) ( 9 4 0 ) ( 1 0 3 4 ) V RMS I L = 7.0 mA Lamp Current I L ( 3 . 0 ) ( 7 . 0 ) ( 8 . 0 ) m A RMS ( 1 ) ( 1 9 0 0 ( 0 ) ℃ )V RMS ( 2 ) Lamp Turn On Voltage V S ( 1 5 0 0 ( 2 5 ) ℃ )V RMS ( 2 ) Operating Frequency F L ( 4 0 ) ( 8 0 ) K H z ( 3 ) Lamp Life Time L BL ( 5 0 , 0 0 0 ) H r s ( 5 ) , I L = 7.0mA Power Consumption P L ( 2 6 . 3 2 ) W ( 4 ) , I L = 7.0 mA Note (1) Lamp current is measured by current amplify & oscilloscope as shown below: M e a s u r e e q u i p m e n t : C u r r e n t A m p l i f y : T e k t r o n i x T C P A 3 0 0 C u r r e n t p r o b e : T e k t r o n i x T C P 3 1 2 O s c i l l o s c o p e : T D S 3 0 5 4 B Note (2) The voltage that must be larger than Vs should be applied to the lamp for more than 1 second after startup. Otherwise, the lamp may not be turned on normally. Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the display, which might cause line flow on the display. In order to avoid interference, the lamp frequency should be detached from the horizontal synchronization frequency and its harmonics as far as possible. Note (4) PL = IL × V L × 4 ( f o r 4 l a m p s ) Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the condition Ta = 25 ±2 oC and IL = 7.0 mArms until one of the following events occurs: (a)When the brightness becomes or lower than 50% of its original value. (b) Effective lighting length decreases 80% under for initial. (Effective lighting length is a scope of luminance 80% over for average luminance at several point in lamp center.) Note (6) The waveform of the voltage output of invert er must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. The performance of the Backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the lamp. All the parameters of an inverter s hould be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. When designing or ordering the LCD Module Inverter HV (+) Oscilloscope HV (-) HV (+) HV (-) Current Amplify Current Probe

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 inverter please make sure that a poor lighting ca used by the mismatch of the Backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. If the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. The output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. Therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. Requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its leakage current. a. The asymmetry rate of the inverter waveform should be 10% below; b. The distortion rate of the waveform should be within √2 ± 10%; c . T h e i d e a l s i n e w a v e f o r m s h a l l be symmetric in positive and negative polarities I p I -p * Asymmetry rate: | I p – I –p | / Irms * 100% * Distortion rate I p (or I –p) / Irms

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 4. BLOCK DIAGRAM Note:On the same side,the same polarity lamp voltage design for lamps is recommended. TFT LCD PANEL (1920x3x1200) DATA DRIVER IC SCAN DRIVER IC BACKLIGHT UNIT LVDS INPUT / TIMING CONTROLLER DC/DC CONVERTER & REFERENCE VOLTAGE INPUT CONNECTOR (Starconn 093G30B0001A or JAE FI-X30SSL-HF) GND VL Vcc RXO0(+/-) RXO1(+/-) RXO2(+/-) RXO3(+/-) RXOC(+/-) RXE0(+/-) RXE1(+/-) RXE2(+/-) RXE3(+/-) RXEC(+/-) NC LAMP CONNECTOR (YEONHO 20015HS-04LB)

1 H V ( B l u e )

2 LV(Black)

1 H V ( P i n k )

2 L V ( W h i t e )

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 5. INPUT TERMINAL PIN ASSIGNMENT 5. INPUT TERMINAL PIN ASSIGNMENT 1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)

7 GND Ground

8 RXOC- Negative LVDS differential clock input. (odd) 9 RXOC+ Positive LVDS differential clock input. (odd) 10 RXO3- Negative LVDS differential data input. Channel O3(odd) 11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even)

14 GND Ground

15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even)

17 GND Ground

18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even)

24 GND Ground

25 NC Not connection, this pin should be open. 26 NC Not connection, this pin should be open. 27 NC Not connection, this pin should be open. 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply Note (1) Connector Part No.: STARCONN 093G30-B0001A or JAE FI-X30SSL-HF. Note (2) The first pixel is odd. Note (3) Input signal of even and odd clock should be the same timing.

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 LVDS output D7 D6 D4 D3 D2 D1 D0 LVDS Channel O0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 LVDS Channel O1 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 LVDS Channel O2 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 LVDS Channel O3 Data order NA OB7 OB6 OG7 OG6 OR7 OR6 LVDS output D7 D6 D4 D3 D2 D1 D0 LVDS Channel E0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8 LVDS Channel E1 Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1 LVDS output D26 D25 D24 D22 D21 D20 D19 LVDS Channel E2 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 LVDS Channel E3 Data order NA EB7 EB6 EG7 EG6 ER7 ER6

5.3 BACKLIGHT UNIT:

Pin Symbol Description Remark 1-1 HV High Voltage Pink 1-2 LV Low Voltage White 2-3 HV High Voltage Blue 2-4 LV Low Voltage Black Note (1) Connector Part No.: YEONHO 20015HS-04LB or equivalent

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 T h e b r i g h t n e s s o f e a c h p r i m a r y c o l o r ( r e d , g r e e n a nd blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter t he color. The table below provides the assignment of color versus data input. D a t a S i g n a l Red Green Blue Color R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Basic Colors Black Red Green Blue Cyan Magenta Yellow White Gray Scale Of Red Red(0) / Dark Red(1) Red(2) Red(253) Red(254) Red(255) Gray Scale Of Green Green(0) / Dark Green(1) Green(2) Green(253) Green(254) Green(255) Gray Scale Of Blue Blue(0) / Dark Blue(1) Blue(2) Blue(253) Blue(254) Blue(255) Note (1) 0: Low Level Voltage, 1: High Level Voltage

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 Th TC DCLK Thd TVd Tv DE DE DATA TVb Thb 6. INTERFACE TIMING The input signal timing specifications are shown as the following table and timing diagram. Signal Item Symbol Min. Typ. Max. Unit Note Frequency Fc TBD 75 (93) MHz - Period Tc - 13.0 - ns High Time Tch - 4/7 - Tc - LVDS Clock Low Time Tcl - 3/7 - Tc - Setup Time Tlvs 600 - - ps - LVDS Data Hold Time Tlvh 600 - - ps - Frame Rate Fr TBD 60 (75) Hz Tv=Tvd+Tvb Total Tv TBD 1125 TBD Th - Display Tvd 1080 1080 1080 Th - Vertical Active Display Term Blank Tvb Tv-Tvd 145 Tv-Tvd Th - Total Th TBD 1100 TBD Tc Th=Thd+Thb Display Thd 960 960 960 Tc - Horizontal Active Display Term Blank Thb Th-Thd 140 Th-Thd Tc - Note: Because this module is operated by DE onl y mode, Hsync and Vsync input signals should be set to low logic level or ground. Otherwise, this module would operate abnormally. INPUT SIGNAL TIMING DIAGRAM

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0

6.2 POWER ON/OFF SEQUENCE

T o p r e v e n t a l a t c h - u p o r D C o p e r a t i o n o f L C D m o d u l e , t h e p o w e r o n / o f f s e q u e n c e s h o u l d b e a s t h e diagram below. Timing Specifications: 0.5< t1 ≦ 1 0 m s e c 0 < t2 ≦ 5 0 m s e c 0 < t3 ≦ 5 0 m s e c t4 ≧ 5 0 0 m se c t5 ≧ 5 0 0 m se c t6 ≧ 9 0 m s e c - Power Supply for LCD, Vcc - Interface Signal (LVDS Signal of Transmitter), VI - Power for Lamp Restart Power On Power Off 50%50% 10% t6 t5 t3 t2 90% 10% 90% Valid Data ONOFF OFF

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 7. OPTICAL CHARACTERISTICS Ambient Temperature Ta 25±2 oC Ambient Humidity Ha 50±10 %RH Supply Voltage V CC 7 V V Input Signal According to typical val ue in "3. ELECTRICAL CHARACTERISTICS" Lamp Current I L ( 7 . 0 ± 0 . 5 ) m A Inverter Operating Frequency F L ( 5 5 ± 5 ) K H z Inverter Darfon VK.13165.101

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteri stics are shown in 7.2. The following items should be measured under the test conditions described in 7.1 and stable environment shown in Note (5). Item Symbol Condition Min. Typ. Max. Unit Note Rx (0.647) Red Ry (0.334) Gx (0.284) Green Gy (0.607) Bx (0.151) Blue By (0.071) Wx 0.313 Color Chromaticity (CIE 1931) White Wy Typ - 0.03 0.329 Typ + 0.03 - (1), (5) Center Luminance of White (Center of Screen) LC (230) (300) - cd/m 2 (4), (5) Contrast Ratio CR Tx=0q, TY =0q CS-1000T TR - 1 . 5 3 . 5 Response Time TF Tx=0q, TY =0q - 3.5 6.5 ms (3) White Variation GW Tx=0q, TY =0q Tx+ 75 85 - Horizontal Tx- 75 85 - TY+ 70 80 - Viewing Angle Vertical TY- CR ≧ 1 0 CA-210 70 80 - Deg. (1), (5)

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 Note (1) Definition of Viewing Angle (Tx, Ty): Note (2) Definition of Contrast Ratio (CR): The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255 L 0: Luminance of gray level 0 CR = CR (1) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6). Note (3) Definition of Response Time (TR, TF): 12 o’clock direction Ty+ = 90º 6 o’clock Ty- = 90º Tx Tx Ty- Ty x- y+ y- x+ N o r m a l Tx = Ty = 0º TX+ = 90º TX- = 90º Optical Response 100% 90% 10% Gray Level 255 Gray Level 0 Gray Level 255 TimeTFTR 66.67ms 66.67ms

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 Note (4) Definition of Luminance of White (LC): Measure the luminance of gray level 255 at center point LC = L (1) L (x) is corresponding to the luminance of the point X at Figure in Note (6). Note (5) Measurement Setup: T h e L C D m o d u l e s h o u l d b e s t a b i l i z e d a t g i ven temperature for 40 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 40 minutes in a windless room. CS-1000T 500 mm LCD Module LCD Panel Center of the Screen Light Shield Room (Ambient Luminance < 2 lux) USB2000

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 Note (6) Definition of White Variation ( GW): Measure the luminance of gray level 255 at 13 points GW = 10mm W/4 W 10mm H/4 H 10mm W/4 W/4 H/4H/4 H/4 10mm W/4 Vertical Line Number ：Test Point X＝1 to 13 X Active Area Horizontal Line Number

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 7 LCD modules / 1 Box (2) Box dimensions: 620(L) X 348(W) X 430(H) mm (3) Weight: approximately: 23.5kg (7 modules per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items. Test Item Test Conditions Note Vibration ISTA STANDARD Random, Frequency Range: 1 – 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y) Non Operation Dropping Test 1 Angle, 3 Edge, 6 Face, 60cm Non Operation Figure. 8-1 Packing method

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 Sea / Land Transportation (40ft HQ Container) Corner Protector (50*50*800mm) Corner Protector (50*50*1250mm) Pallet (1250*1050*143mm) Corner Protector (50*50*1000mm) PP Belt PE Sheet Film PE Sheet Film Carton label Sea / Land Transportation (40ft Container) Pallet (1250*1050*143mm) Corner Protector (50*50*800mm) Corner Protector (50*50*800mm) Corner Protector (50*50*1000mm) PP Belt PE Sheet Film PE Sheet Film Carton label PE Sheet Corner Protector (50*50*1000mm) Film PP Belt Corner Protector (50*50*1250mm) Pallet (1250*1050*143mm) Carton label Figure. 8-2 Packing method For ocean shipping For air transport Figure. 8-3 Packing method

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) Model Name: M236H1-L01 (b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. (c) CMO barcode definition: Serial ID: XX-XX-X-XX-YMD-L-NNNN Code Meaning Description XX CMO internal use - X CMO internal use - XX CMO internal use - YMD Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4… Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y , exclude I, O, and U. L Product line # Line 1=1, Line 2=2, Line 3=3, … NNNN Serial number Manufacturing sequence of product (d) Customer’s barcode definition: Serial ID: CM-24H11-X-X-X-XX-L-XX-L-YMD-NNNN Code Meaning Description CM Supplier code CMO=CM 24H11 Model number M236H1-L011= 24H11 X Revision code Non ZBD: 1,~,9,0 / ZBD: A~Z X Source driver IC code X Gate driver IC code Century=1, CLL=2, Demos=3, Epson=4, Fu jitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M XX Cell location Tainan Taiwan=TN, Ningbo China=CN L Cell line # 1~12=0~C XX Module location Tainan Taiwan=TN, Ningbo China=NP L Module line # 1~12=0~C YMD Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4… NNNN Serial number By LCD supplier

D o c N o . : I s s u e d D a t e : 2 8 . A p r . , 2 0 0 8 Model No.: M236H1-L01 Tentative Version 0.0 10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

( 1 ) D o n o t a p p l y r o u g h f o r c e s u c h a s b e n d i n g o r t w i s t i n g t o t h e m o d u l e d u r i n g a s s e m b l y . ( 2 ) T o a s s e m b l e o r i n s t a l l m o d u l e i n t o u s e r ’ s s y s t e m c a n b e o n l y i n c l e a n w o r k i n g a r e a s . T h e d u s t a n d o i l may cause electrical short or worsen the polarizer. ( 3 ) I t ’ s n o t p e r m i t t e d t o h a v e p r e s s u r e o r i m p u l s e o n t h e m o d u l e b e c a u s e t h e L C D p a n e l a n d B a c k l i g h t w i l l be damaged. ( 4 ) A l w a y s f o l l o w t h e c o r r e c t p o w e r s e q u e n c e w h e n LCD module is connecting and operating. This can prevent damage to the CMOS LSI chips during latch-up. ( 5 ) D o n o t p u l l t h e I / F c o n n e c t o r i n o r o u t w h i l e t h e m o d u l e i s o p e r a t i n g . (6) Do not disassemble the module. ( 7 ) U s e a s o f t d r y c l o t h w i t h o u t c h e m i c a l s f o r c l e a n i n g , because the surface of polarizer is very soft and easily scratched. ( 8 ) I t i s d a n g e r o u s t h a t m o i s t u r e c o m e i n t o o r contacted the LCD module, because moisture may damage LCD module when it is operating. ( 9 ) H i g h t e m p e r a t u r e o r h u m i d i t y m a y r e d u c e t h e p e rformance of module. Please store LCD module within the specified storage conditions. ( 1 0 ) W h e n a m b i e n t t e m p e r a t u r e i s l o w e r t h a n 1 0 º C may reduce the display quality. For example, the response time will become slow ly, and the starting voltage of C C F L w i l l b e h i g h e r t h a n r o o m temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximat ely 1000 Volts. It may cause electrical shock while assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit. ( 2 ) I f t h e l i q u i d c r y s t a l m a t e r i a l l e a k s f r o m t h e p a n e l , it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. ( 3 ) A f t e r t h e m o d u l e ’ s e n d o f l i f e , i t i s n o t harmful in case of normal operation and storage.