BT140GW01 | DigiCamel IC Datasheet

Online Datasheet

Read BT140GW01 online.

BT140GW01 CHIMEI | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 28

Technical content

Chimei-Innolux Corporation BT140GW01 V.5 LCD MODULE SPECIFICATION (●) Preliminary Specification ( ) Final Specification Customer Checked & Approved by HP International Pte. Ltd. Approved by Checked by Prepared by MKT PD PM Monica Huang Date: 2010/03/31 Chimei-Innolux Corporation No.160 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park, Chu-Nan 350, Miao-Li County, Taiwan Tel: 886-37-586000 Fax: 886-37-586060

SPEC NO. BT 140GW 01 V.5 PAGE 3/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Contents: Page 1. General Specifications 2 2. Electrical Specifications 2-1 Pin Assignment 3. Optical Specifications 12 4. Reliability Test Items 15 5. Safety 16 6. Display Quality 16 7. Handling Precaution 16 8. Label Definition 18 9. Packing Form 19 10. Mechanical Drawings 21 Appendix 23

SPEC NO. BT 140GW 01 V.5 PAGE 4/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 1. General Specifications NO. Item Specification Unit

1 Display resolution (pixel) 1366(H) X 768(V), HD reso lution

2 Active area 309.40(H) X 173.95(V) mm 3 Screen size 14.0 inches diagonal Inches 4 Pixel pitch 0.2265(H) X 0.2265(V) mm

5 Color configuration Stripe

6 Overall dimension 324(W) X 192.5(H) X 5.2(D) (max) mm 7 Weight 350Max. Grams

8 Surface treatment Glare, 3H

9 Input color signal 6 bit LVDS

10 Display colors 262K (6 bit)

11 Optimum viewing direction 6 o’clock

12 Backlight W-LED

13 RoHS RoHS compliance

SPEC NO. BT 140GW 01 V.5 PAGE 5/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 2. Electrical Specifications 2-1 Pin Assignment a. Panel connector Connector Part No: GS13401-1110S-7H (Foxconn ) User’s connector Part No: 20453-040T-12(I-PEX) or e quivalent Pin No Symbol Description Remark

1 NC No connection (Reserve)

2 V CC Power Supply (+3.3V) 3 V CC Power Supply (+3.3V) 4 V EDID DDC Power +3.3V 5 BIST BIST function enable (+3.3V)

6 Clk EDID DDC Clock

7 DATA EDID DDC Data

8 Rxin0- Differential Data Input

9 Rxin0+ Differential Data Input R0~R5,G0

10 GND Ground

11 Rxin1- Differential Data Input

12 Rxin1+ Differential Data Input G1~G5,B0,B1

13 GND Ground

14 Rxin2- Differential Data Input

15 Rxin2+ Differential Data Input

B2~B5,DE,Hsync,Vsync

16 GND Ground

17 CLK- Differential Clock Input

18 CLK+ Differential Clock Input

19 NC No connection (Reserve)

20 NC No connection (Reserve)

21 NC No connection (Reserve)

22 NC No connection (Reserve)

23 NC No connection (Reserve)

24 NC No connection (Reserve)

25 NC No connection (Reserve)

26 NC No connection (Reserve)

27 NC No connection (Reserve)

28 NC No connection (Reserve)

29 NC No connection (Reserve)

30 NC No connection (Reserve)

31 LED_GND LED Ground

32 LED_GND LED Ground

33 LED_GND LED Ground

34 NC No connection (Reserve)

35 LED_PWM PWM dimming signal input

36 LED_EN LED enable pin (3.3V)

37 NC No connection (Reserve)

38 V_LED LED power supply 6.0V~20V 39 V_LED LED power supply 6.0V~20V 40 V_LED LED power supply 6.0V~20V

SPEC NO. BT 140GW 01 V.5 PAGE 6/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux b. General Block Diagram （Rear-side ） GS13401-1110S-7H (Foxconn ) T-C ON DC/DC CC LED Drive r FPC GS13401-1110S-7H VR Connector plug in direction Pin1

SPEC NO. BT 140GW 01 V.5 PAGE 7/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 2-2. Absolute Maximum Ratings Values Parameter Symbol Min. Max. Unit Remark Power input voltage V CC - 0.3 4.0 V At 25 °C Signal input voltage V IN - 0.3 4.0 V At 25 °C Operating temperature T OP 0 50 °C Note 1 Storage temperature T ST - 20 60 °C Note 2 Re-screw - 5 Times Assured torque at side mount - 2 kgf.cm Note 1: The relative humidity must not exceed 90% non-co ndensing at temperatures of 40 °C or less. At temperatures greater than 40 °C, the wet bulb temperature must not exceed 39 °C. Note 2: The unit should not be exposed to corrosive c hemicals. 100 -30 -20 -10 0 10 20 30 40 50 60 70 Relative Humidity (%RH) Operation Range Storage Range Temperature (°C)

SPEC NO. BT 140GW 01 V.5 PAGE 8/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 2-3. Electrical Characteristics a. Typical operating conditions Item Symbol Min. Typ. Max. Unit Remark Power input voltage VCC 3 3.3 3.6 V Permissive power input ripple VRF - - 0.1 V Power input current ICC - 300 330 mA Note 1 Power consumption PC - - 1 Watts Note 1 Differential input high threshold voltage VLVTH - - +100 mV VLVC =1.2V, Note 2 Differential input low threshold voltage VLVTL -100 - - mV VLVC =1.2V, Note 2 Common input voltage VLVC 0.1 1.2 1.4 V Note 2 LVDS interface Terminating resistor RT 90 100 110 ohm Rush current IRush - - 1.5 A Note 3 LED rush current ILED-Rush - - 3.0 A Note 4 Note 1: The specified input current and power consump tion are under the V cc =3.3 V, 25 °C, fV=60Hz (frame frequency) condition whereas black patter n is displayed. Note 2: LVDS waveform diagram Rxin+/CLK+ Rxin-/CLK- VLVC VLVTL VLVTH GND

SPEC NO. BT 140GW 01 V.5 PAGE 9/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Note 3: Test condition (1) Pattern: Black pattern (2) V CC = 3.3 V, V CC rising time = 470 μs ± 10% (3) Test circuit 90% 10% Ton=470µs±10% VCC 3.3 V 12V VCC ( LCD input) Control signal (High to low) 2SK1399 2SK1059 10000pF C3 1uF 47K 47K FUSE C1 1uF

SPEC NO. BT 140GW 01 V.5 PAGE 10/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Note 4: Test condition (1) Pattern: LED duty 100 ％ (2) V_LED = 12.0V, V_LED rising time = 470 μs ± 10% (3) Test circuit 90% 10% Ton=470µs±10% V_LED 12 V 21V V_LED Control signal (High to low) 2SK1399 2SK1059 10000pF C3 1uF 47K 47K FUSE C1 1uF

SPEC NO. BT 140GW 01 V.5 PAGE 11/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux b. Power sequence Power sequence timing table Value Parameter Min. Typ. Max. Units T1 0.5 - 10 ms T2 0 - 50 ms T3 200 - - ms T4 200 - - ms T5 0 - 50 ms T6 0 - 10 ms T7 400 - - ms Power supply for LCD, VCC Interface data signal, V i (LVDS signal of transmitter) Backlight on/off T3 T4 T5 T6 T7 Valid Data Lamp On OFF OFF 90% 10% 10% 90%

SPEC NO. BT 140GW 01 V.5 PAGE 12/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux c. Display color vs. input data signals Signal Name Description Remark R5 Red Data 5 (MSB) R4 Red Data 4 R3 Red Data 3 R2 Red Data 2 R1 Red Data 1 R0 Red Data 0 (LSB) Red-pixel Data Red-pixel data. Each red pixel's brightness data consists of these 6 bits pixel data. G5 Green Data 5 (MSB) G4 Green Data 4 G3 Green Data 3 G2 Green Data 2 G1 Green Data 1 G0 Green Data 0 (LSB) Green-pixel Data Green-pixel data. Each green pixel's brightness data consists of these 6 bits pixel data. B5 Blue Data 5 (MSB) B4 Blue Data 4 B3 Blue Data 3 B2 Blue Data 2 B1 Blue Data 1 B0 Blue Data 0 (LSB) Blue-pixel Data Blue-pixel data. Each blue pixel's brightness data consists of these 6 bits pixel data. Signal for 1 DCLK cycle (t CLK )

SPEC NO. BT 140GW 01 V.5 PAGE 13/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux d. Input signal timing Timing table Description Symbol Min Typ Max Unit Frame rate -- 40 60 -- Hz Clock freq. 1/t CLK 45 71 85 MHz Line cycle time t H 1400 1498 1800 tCLK Line width-active tHd 1366 1366 1366 tCLK Frame cycle time tV 780 790 900 t H V width-active t Vd 768 768 768 t H e. Display position D(1366, 1) . …… . …… . …… . …… t V t Vd t H t Hd t CLK DE DE DCLK

SPEC NO. BT 140GW 01 V.5 PAGE 14/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux f. Backlight driving conditions Parameter Symbol Min. Typ. Max. Unit Remark Remark LED forward voltage VF 3 3.2 3.4 V rms T = 25 °C LED forward current IF 20 mA rms T = 25 °C Power consumption PLED 3 W T = 25 °C Input PWM frequency FPWM 180 2000 Hz T = 25 °C Duty ratio - 5 100 % Note 1 LED life time - 15,000 Hr T = 25 °C , Note 2 Note 1: PWM duty cycle linearity guarantees 10~100%. Note 2: LED life time definition is brightness decreas e to 50% of initial or abnormal lighting. g. Module function block LVDS DATA BUS mini-LVDS & CONTROL BUS POWER I2C BUS 3. Optical specifications Ambient temperature = 25 °° °°C Gate driver Source driver Timing controller Step -up regulator & reference voltage generator EDID EEPROM TFT-LCD LVDS connector LED Light-bar LED driver

SPEC NO. BT 140GW 01 V.5 PAGE 15/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Specification Item Symbol Condition Min. Typ. Max. Unit Remark Response time Tr+Tf θ= 0 ∘ 8 16 ms Note 3 Contrast ratio CR θ= 0 ∘ 500 600 Note 2,4 Top CR ≧10 15 Bottom CR ≧10 30 Left CR ≧10 40 Viewing angle Right CR ≧10 40 deg Note 2,4,6 Brightness (5 points average) YL 220 nit Note 2,5 Wx 0.313 Wy 0.329 Rx 0.58 Ry 0.34 Gx 0.31 Gy 0.55 Bx 0.155 Color chromaticity (CIE) By θ= 0 ∘ -0.03 0.155 +0.03 Note 2 Color Gamut NTSC CIE1931 45 % - δW(5) 0.8 Note 2,7 White uniformity δW(13) 0.65 Cross talk Ct 2% Note 8 Note 1: To be measured in dark room. Note 2: To be measured with a viewing cone of 2°by To pcon luminance meter BM-5A. Note 3: Definition of response time: The output signals of BM-7 are measured when the inpu t signals are changed from “Black” to “White” (falling time) and from “White” to “Black” ( rising time), respectively. The response time interval is between 10% and 90% of amplitudes. Refer to figure as below.

SPEC NO. BT 140GW 01 V.5 PAGE 16/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Note 4: Definition of contrast ratio: Contrast ratio is calculated with the following formu la: Note 5: Driving current for LED should be 20 mA. Luminance is measured at the following thirteen poin ts (1~13): Note 6: Definition of viewing angle Note 7: Definition white uniformity Luminance is measured at the following thirteen poin ts (1~13): Signal(Relative value) "Black" Tr Tf "White" "White" 10% 90% 100% Contrast ratio ( Avg of 5pts ) = L white (Avg of 5pts.) L Black (Avg of 5pts.) δW(13) = Maximum brightness of thirteen points Minimum brightness of thirteen points δW(5) = Maximum brightness of five points Minimum brig htness of five points

SPEC NO. BT 140GW 01 V.5 PAGE 17/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 13 point measuring locations refer to the point 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13. 5 point measuring locations refer to the point 5, 10, 11, 12 and 13. Note 8: Unit: percentage of dimension of display area l L A-LA’ l / L A x 100%= 2% max., L A and L A’ are brightness at location A and A’ l L B-LB’ l / L B x 100%= 2% max., L B’ and L B’ are brightness at location B and B’ 0 gray level A B 2/3 1/3 32 gray level 32 gray level

SPEC NO. BT 140GW 01 V.5 PAGE 18/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 4. Reliability test items Test Item Test Condition Judgment Remark High temperature storage 60°C, 240 hours Note 1 Note 2 Low temperature storage -20°C, 240 hours Note 1 Note 2 High temperature & high humidity operation 40°C, 90% RH, 240 hours (No condensation) Note 1 Note 2 High temperature operation 50 °C, 240 hours Note 1 Note 2 Low temperature operation 0°C, 240 hours Note 1 Note 2 Thermal Shock (Non-operation) -25°C / 30 mins ~ 65°C / 30 mins 100 cycles Note 1 Note 2 Electrostatic discharge (ESD) 150 pF, 330Ω, Contact: ±8kV, Air: ±15kV Note 1 Vibration (Non-operation) 1.5G, 10 to 500 Hz random; 0.5hr in each perpendicular axes ( X, Y , Z ). Note 1 Note 2 Mechanical shock (Non-operation) 220G/2ms, Half sine wave, ±X, ±Y , ±Z one time for each direction Note 1 Note 2 Note 1: Pass: Normal display image with no obvious non-uniformity and no line defect. Fail: No display image, obvious non-uniform ity, or line defects. Partial transformation of the module parts should b e ignored. Note 2: Evaluation should be tested after storage at r oom temperature for more than one hour.

SPEC NO. BT 140GW 01 V.5 PAGE 19/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 5. Safety 5-1. Sharp edge requirements There will be no sharp edges or corners on the display assembly that could cause injury. 5-2. Materials a. Toxicity There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible InnoLux Toxicologist. b. Flammability All components including electrical components that do not meet the flammability grade UL94-V0 in the module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V0 or bet ter. The actual UL flammability rating will be printed on the printed circuit board. c. Capacitors If any polarized capacitors are used in the display assemb ly, provisions will be made to keep them from being inserted backwards. 6. Display quality The display quality of the color TFT-LCD module sho uld be in compliance with the InnoLux incoming inspection standard. 7. Handling precaution (1) Do not apply rough force such as bending or twi sting to the module during assembly. (2) To assemble or install module into user’s syste m can be only in clean working areas. The dust and oil may cause electrical short or worsen t he polarizer. (3) It’s not permitted to have pressure or impulse on the module because the LCD panel and backlight will be damaged. (4) Always follow the correct power sequence when L CD module is connecting and operating. (5) Do not pull the I/F connector in or out while t he module is operating. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for clea ning, because the surface of polarizer is very soft and easily scratched. (8) It is dangerous that moisture come into or cont acted the LCD module, because moisture may damage LCD module when it is operating. (9) High temperature or humidity may reduce the per formance of module. Please store LCD module within the specified storage conditions.

SPEC NO. BT 140GW 01 V.5 PAGE 20/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 8. Label Definition 8-1. Module label (1) Model Number : BT140GW01 V.5 (2) Product Number : AB140000150X (3) Serial ID I : Z 1 Z 2 Z 3 Z 4 Z 5 Z 6 - Z 7 - Z 8 Z 9 Z10 Z 11 Z 12 Serial ID includes the information as below: Manufactured Date: Year: 0~9, for 2000~2009 Month: 1~9 & A~C for Jan.~Dec. Date: 1~9 & A~Z (exclude I, O, Q, U) for 1th~31th Serial No.: Module manufacture sequential number. (4) Serial ID II : Unique Sequence Identifier Week/Year of MFG Supplier/Site of MFG Revision Level Assembly Code Commodity Code Commodity Tracking Label Designator MADE IN CHINA BT1 40 GW0 1 V. 5 AB1 40 000 1 5 0X Z1 Z 2 Z 3 Z 4 Z 5 Z 6 –Z7 –Z8 Z 9 Z 10 Z 11 Z 12 CT: C-Z1 Z 2 Z 3 Z 4– Z 5 Z 6 –Z7Z8– Z 9Z10 –Z11 Z 12 Z13 73 mm 18 mm INNO LUX Year, Month, Date. INL internal use Serial No. INL internal use INL internal use INL internal use

SPEC NO. BT 140GW 01 V.5 PAGE 21/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 8-1. Carton label (1) Model No. : BT140GW01 (2) Version: V.5 (3) Package Quantity: XX PCS (4) MFG Date: Year/Month/Date (5) Serial ID : Z1 Z 2 Z 3 Z 4– Z 5 – Z6 Z 7 Z 8 Z 9 BOX ID: INNOLUX DISPLAY 90.5mm Z1 Z 2 Z 3 Z 4– Z 5 –Z6 Z 7 Z 8 Z 9 Model No. BT140GW01 V.5 AB1400001 50X Quantity: XX PCS MFG Date: XXXX/XX/XX QC: 35.3mm MADE IN CHINA INL Internal Use Manufactured Date INL Internal Use Serial Number 55mm 20mm

SPEC NO. BT 140GW 01 V.5 PAGE 22/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 9.Packing Form

SPEC NO. BT 140GW 01 V.5 PAGE 23/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 10. Mechanical Drawings 10-1 Front Side

SPEC NO. BT 140GW 01 V.5 PAGE 24/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux 10-2 Rear side

SPEC NO. BT 140GW 01 V.5 PAGE 25/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Appendix: EDID Code Byte (Hex) Field Name and Comments Value (Hex) Value (Bin)

00 Header 00 00000000

01 Header FF 11111111

02 Header FF 11111111

03 Header FF 11111111

04 Header FF 11111111

05 Header FF 11111111

06 Header FF 11111111

07 Header 00 00000000

08 EISA manufacture code ( 3 Character ID ) " INL" 25 00100101

09 EISA manufacture code (Compressed ASC Ⅱ) CC 11001100

0A Panel Supplier Reserved - Product Code "00" 00 00000000 0B ( Hex. LSB first ) 00 00000000 0C LCD Module Serial No - Preferred but Optional ("0" If not used) 00 00000000 0D LCD Module Serial No - Preferred but Optional ("0" If not used) 00 00000000 0E LCD Module Serial No - Preferred but Optional ("0" If not used) 00 00000000 0F LCD Module Serial No - Preferred but Optional ("0" If not used) 00 00000000

10 Week of Manufacture

11 Year of Manufacture

12 EDID structure version # = 1 01 00000001

13 EDID revision # = 3 03 00000011

14 Video input Definition = Digital signal 80 10000000

15 Max H image size (Rounded cm) = 31 cm 1F 00011111

16 Max V image size (Rounded cm) = 18 cm 12 00010010

17 Display gamma = (gamma*100)-100 = Example:(2.2*100)-100=120 = 2.2 Gamma 78 01111000 Display Parameters 18 Feature Support (no_DPMS, no_Active Off/Very Low Power, RGB color display, Timing BLK 1,no_ GTF) 0A 00001010

19 Red/Green Low Bits (RxRy/GxGy) 87 10000111

1A Blue/White Low Bits (BxBy/WxWy) F5 11110101 1B Red X Rx = 0.580 94 10010100 1C Red Y Ry = 0.340 57 01010111 1D Green X Gx = 0.310 4F 01001111 1E Green Y Gy = 0.550 8C 10001100 1F Blue X Bx = 0.155 27 00100111 20 Blue Y By = 0.155 27 00100111 21 White X Wx = 0.313 50 01010000 Panel Color Coordinates 22 White Y Wy = 0.329 54 01010100

SPEC NO. BT 140GW 01 V.5 PAGE 26/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux

23 Established timing 1 (00h if not used) 00 00000000

24 Established timing 2 (00h if not used) 00 00000000

Timings 25 Manufacturer's timings (00h if not used) 00 00000000

26 Standard timing ID1 (01h if not used) 01 00000001

27 Standard timing ID1 (01h if not used) 01 00000001

28 Standard timing ID2 (01h if not used) 01 00000001

29 Standard timing ID2 (01h if not used) 01 00000001

2A Standard timing ID3 (01h if not used) 01 00000001 2B Standard timing ID3 (01h if not used) 01 00000001 2C Standard timing ID4 (01h if not used) 01 00000001 2D Standard timing ID4 (01h if not used) 01 00000001 2E Standard timing ID5 (01h if not used) 01 00000001 2F Standard timing ID5 (01h if not used) 01 00000001

30 Standard timing ID6 (01h if not used) 01 00000001

31 Standard timing ID6 (01h if not used) 01 00000001

32 Standard timing ID7 (01h if not used) 01 00000001

33 Standard timing ID7 (01h if not used) 01 00000001

34 Standard timing ID8 (01h if not used) 01 00000001

35 Standard timing ID8 (01h if not used) 01 00000001

36 Pixel Clock/10,000 (LSB) 71 MHz @ 60Hz BC 10111100

37 Pixel Clock/10,000 (MSB) 1B 00011011

38 Horizontal Active (lower 8 bits) 1366 Pixels 56 01010110

39 Horizontal Blanking(Thp-HA) (lower 8 bits) 132 Pixels 84 10000100

3A Horizontal Active / Horizontal Blanking(Thp-HA) (upper 4:4bits) 50 01010000 3B Vertical Avtive 768 Lines 00 00000000 3C Vertical Blanking (Tvp-HA) (DE Blanking typ.for DE only panels) 22 Lines 16 00010110 3D Vertical Active : Vertical Blanking (Tvp-HA) (upper 4:4bits) 30 00110000 3E Horizontal Sync. Offset (Thfp) 48 Pixels 30 00110000 3F Horizontal Sync Pulse Width (HSPW) 32 Pixels 20 00100000

40 Vertical Sync Offset(Tvfp) : Sync Width (VSPW) 1 Lines : 4 Lines 14 00010100

41 Horizontal Vertical Sync Offset/Width (upper 2bits) 00 00000000

42 Horizontal Image Size (mm) 309 mm 35 00110101

43 Vertical Image Size (mm) 174 mm AE 10101110

44 Horizontal Image Size / Vertical Image Size 10 00010000

45 Horizontal Border = 0 (Zero for Notebook LCD) 00 00000000

46 Vertical Border = 0 (Zero for Notebook LCD) 00 00000000

Timing Descriptor #1

47 Non-Interlace, Normal display, no stereo, Digital Separate ( Vsync_NEG, Hsync_NEG ),

DE only note : LSB is set to '1' if panel is DE-timing only. H/V can be ignored. 18 00011000

SPEC NO. BT 140GW 01 V.5 PAGE 27/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Flag 00 00000000

49 Flag 00 00000000

4B Data Type Tag (Descriptor Defined by manufacturer ) 00 00000000 4C Flag 00 00000000 4D Descriptor Defined by manufacturer 0A 00001010 4E Descriptor Defined by manufacturer 20 00100000 4F Descriptor Defined by manufacturer 20 00100000

50 Descriptor Defined by manufacturer 20 00100000

51 Descriptor Defined by manufacturer 20 00100000

52 Descriptor Defined by manufacturer 20 00100000

53 Descriptor Defined by manufacturer 20 00100000

54 Descriptor Defined by manufacturer 20 00100000

55 Descriptor Defined by manufacturer 20 00100000

56 Descriptor Defined by manufacturer 20 00100000

57 Descriptor Defined by manufacturer 20 00100000

58 Descriptor Defined by manufacturer 20 00100000

Timing Descriptor #2

59 Descriptor Defined by manufacturer 20 00100000

5D Data Type Tag ( ASCII String ) FE 11111110 5E Flag 00 00000000 5F ASCII String "I" 49 01001001

60 ASCII String "N" 4E 01001110

61 ASCI I String "L" 4C 01001100

62 ASCII String 0A 00001010

63 ASCII String 20 00100000

64 ASCII String 20 00100000

65 ASCII String 20 00100000

66 ASCII String 20 00100000

67 ASCII String 20 00100000

68 ASCII String 20 00100000

69 Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASC Ⅱ code 0Ah,set remaining

char = 20h) 20 00100000 6A Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASC Ⅱ code 0Ah,set remaining char = 20h) 20 00100000 Timing Descriptor #3 6B Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASC Ⅱ code 0Ah,set remaining char = 20h) 20 00100000

SPEC NO. BT 140GW 01 V.5 PAGE 28/26 ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS D OCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION F ROM Chimei-Innolux Flag 00 00000000 6D Flag 00 00000000 6E Flag 00 00000000 6F Data Type Tag ( Monitor Name, stored as ASCII ) FC 11111100

70 Flag 00 00000000

71 Monitor Name, stored as ASCII "B" 42 01000010

72 Monitor Name, stored as ASCII "T" 54 01010100

73 Monitor Name, stored as ASCII "1" 31 00110001

74 Monitor Name, stored as ASCII "4" 34 00110100

75 Monitor Name, stored as ASCII "0" 30 00110000

76 Monitor Name, stored as ASCII "G" 47 01000111

77 Monitor Name, stored as ASCII "W" 57 01010111

78 Monitor Name, stored as ASCII "0" 30 00110000

79 Monitor Name, stored as ASCII "1" 31 00110001

7A Monitor Name, stored as ASCII "V" 56 01010110 7B Monitor Name, stored as ASCII "5" 35 00110101 7C Monitor Name, stored as ASCII 0A 00001010 Timing Descriptor #4 7D Monitor Name, stored as ASCII 20 00100000 7E Extension flag (# of optional 128 panel ID extension block to follow, Typ = 0) 00 00000000 Checksum 7F Check Sum (The 1-byte sum of all 128 bytes in this panel ID block shall = 0) 60 01100000

Product Information

BT140GW01 specifications and overview.

Summary

V.5 LCD ModuleI

Description

V.5 LCD ModuleI

Source title BT140GW01 Datasheet(PDF) - Chi Mei Corporation.

Related Parts

More parts from the same family.

Browse manufacturer