LT1U40A

LT1U40A SHARP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Leadless Chip LED Device LT1o 40A series (Notice) \ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) \ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LT1o 40A series n Outline Dimensions Cathode mark 1.2 2.0 0.8 0.40.4 0.5 1.25 1.25 1.251.1 1.1 Device center Recommended PWB pattern for soldering 0.3 1 2 1 2 1.Plating area Resist 2.Pin connections

1 Cathode

2 Anode

3.Unspecified tolerance:–0.1 n Radiation Diagram -20˚ +20˚ +40˚ +60˚ +80˚ -40˚ -60˚ -80˚ 0˚-20˚ +20˚ +40˚ +60˚ +80˚ -40˚ -60˚ -80˚ Y X 100

100 Relative luminous intensity(%)Relative luminous intensity(%)

Model No. Radiation colorRadiation material Power dissipation P (mW) Forward current IF (mA) Derating factor (mA/˚C) Peak forward current IFM *1 (mA) Operating temperature Topr (˚C) Storage temperature Tstg (˚C) Soldering temperature Tsol*2 (˚C) Reverse voltage V R (V) (Ta=25˚C) LT1U40A LT1P40A LT1D40A LT1S40A LT1H40A LT1E40A LT1K40A Red(Super-luminosity)GaAlAs on GaAlAs GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaP 0.40 0.13 0.40 0.40 0.40 0.40 0.40 0.67 0.67 0.67 0.67 0.67 0.67 0.67 350 350 350 350 350 350 350 Red Red Sunset orange Yellow Yellow-green Green -30 to +85 -30 to +85 -40 to +100 -40 to +100 -30 to +85 -30 to +85 -40 to +100 -40 to +100 -30 to +85 -30 to +85 -40 to +100 -40 to +100 -30 to +85 -40 to +100 *1 Duty ratio=1/10, Pulse width=0.1ms *2 For 3s or less at the temperature of hand soldering. Temperature of reflow soldering is shown on the below page. n Absolute Maximum Ratings TYP MAX Model No.Lens type Forward voltage V F(V) λp(nm) TYP IV (mcd) TYP IF (mA) IF (mA) IF (mA) (MH Z)V R (V) IR (µA) MAX C t(pF) TYP ∆λ(nm) TYP Peak emission wavelength Luminous intensitySpectrum radiation bandwidth Reverse current Page for characteristics diagrams Terminal capacitance (Ta=25˚C) LT1U40A LT1P40A LT1D40A LT1S40A LT1H40A LT1E40A LT1K40A 1.85 1.9 2.0 2.0 2.0 2.1 2.1 2.5 2.3 2.8 2.8 2.8 2.8 2.8 660 695 635 610 585 570 555 35.6 1.3 11.9 9.4 10.8 19.0 5.0 100 100 Milky diffusion n Electro-optical Characteristics (Unit : mm) (T a=25˚C) 2125 Size, 0.8mm Thickness, Leadless Chip LED Devices U type: There is Anode mark on the device because polarity faces in the opposite direction.

(Notice) \ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) \ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams N ote)C haracteristics show n in diagram s are typical values. (not assurance value) PR series H D series -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C ) -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C )

LED Lamp Characteristics Diagrams N ote)C haracteristics show n in diagram s are typical values. (not assurance value) H S series H Y series 0.5 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 200 100 500 1000 -20 0 20 40 60 10080 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (IF=20m A ) 200 100 500 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 100 300 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IF(m A ) (Ta=25˚C ) -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C ) 119 (Notice) \ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) \ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/)

(Notice) \ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) \ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams EG series -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C ) N ote)C haracteristics show n in diagram s are typical values. (not assurance value) KG series -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C )

(Notice) ¡ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams Note)Characteristics shown in diagrams are typical values. (not assurance value) Note)Characteristics shown in diagrams are typical values. (not assurance value) UR series TR series (1F=20mA) 200 100 500 1000 -20 0 20 40 60 10080 Luminous Intensity vs. Ambient Temperature(Note) Ambient temperature Ta(˚C) Relative luminous intensity(%) 0.5 100 Forward Current vs. Forward Voltage(Note) Forward voltage VF(V) Forward current IF(mA) (Ta=25˚C) Luminous Intensity vs. Forward Current(Note) Forward current IF(mA) Relative luminous intensity(%) (Ta=25˚C) -20 0 20 40 60 10080 85 Forward Current Derating Curve Ambient temperature Ta(˚C) Forward current IF(mA) 100 200 300 400 500 600 700 -20 0 20 40 60 10080 Peak Forward Current Derating Curve Ambient temperature Ta(˚C) Peak forward current IFM (mA) 1/50 1/20 1/10 1/5 1/2 1 Duty Ratio vs. Peak Forward Current Duty ratio DR Peak forward current IF(mA) (Ta=25˚C) -25 0 25 50 75 85 125100 Peak Forward Current Derating Curve Ambient temperature Ta(˚C) Peak forward current IFM (mA) -25 0 25 50 75 85 125100 Forward Current Derating Curve Ambient temperature Ta(˚C) Forward current IF(mA) 0.1 0.5 1.0 5.0 100 Forward Current vs. Forward Voltage(Note) Forward voltage VF(V) Forward current IF(mA) (Ta=25˚C) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Luminous Intensity vs. Ambient Temperature(Note) Ambient temperature Ta(˚C) Relative luminous intensity(%) (Ta=25˚C) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Luminous Intensity vs. Forward Current(Note) Forward current IF(mA) Relative luminous intensity(%) (Ta=25˚C) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 Duty Ratio vs. Peak Forward Current Duty ratio DR Peak forward current IFM (mA) (Ta=25˚C) 200 100 500 200 100 500 0.1 0.2 0.5 12 5 10 20 50