LT1ED53A

LT1ET53A SHARP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

(Notice) \ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) \ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) 104 LT1oo 53A seriesDichromatic Chip LED Device LT1oo 53A series n Outline Dimensions 3.3 0.9 1.5 0.9 M ilky diffusion 2.9 2.9 1.9 0.4 0.4 0.3 0.8 0to0.15 0.4 0.4 0.950.85 (4-R 0.2) R 0.2 0.16+0.1 -0.06 1.1+0.2 -0.1 Pin connections 1 2 Anode C athode C athode Anode ED /EP R ed Yellow -green H P R ed Yellow series Pin ET R ed (H L) Yellow -green U nspecified tolerance:–0.2 n Radiation Diagram -20˚ +20˚ +40˚ +60˚ +80˚ -40˚ -60˚ -80˚ -30˚ -50˚ +10˚100-10˚ +30˚ +50˚ +70˚ +90˚-90˚ -70˚ 80EH D .P.T R elative lum inous intensity(% ) D C Pulse M odel N o. R adiation color R adiation m aterial Pow er dissipation P (m W ) Forw ard current IF (m A ) D erating factor (m A /˚C ) Peak forw ard current IFM *1 (m A ) O perating tem perature Topr (˚C ) Storage tem perature Tstg (˚C ) Soldering tem perature Tsol*2 (˚C ) R everse voltage V R (V ) (Ta=25˚C ) LT1ET53A LT1ED 53A G aP G aA lA s on G aA s G aP G aA sP on G aP 0.27 0.40 0.27 0.40 0.67 0.67 0.67 0.67 350 350 350 350 LT1EP53A G aP G aP 0.27 0.13 0.67 0.67 350 350 LT1H P53A G aA sP on G aP G aP 0.27 0.13 0.67 0.67 350 350 R ed(H igh-lum inosity) R ed R ed R ed Y ellow Y ellow -green Y ellow -green Y ellow -green -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +85 -25 to +85 -25 to +100 -25 to +100 * The value is specified under the condition that either color is lightened separately. W hen the both diodes are lightened sim ultaneously, the pow er dissipation of each diode should be less than the half of the value specified in this table. *1 D uty ratio=1/10, Pulse w idth=0.1m s *2 For 3s or less at the tem perature of hand soldering. Tem perature of reflow soldering is show n on the below page. n Absolute Maximum Ratings* LT1ET53A LT1ED 53A TY P 1.95 1.75 1.95 2.0 M A X 2.5 2.2 2.5 2.8 565 660 565 635 3.6 6.5 3.6 5.3 LT1EP53A LT1H P53A 1.95 1.9 1.9 1.9 2.5 2.3 2.5 2.3 565 695 585 695 3.6 1.1 3.1 1.1 100 100 M odel N o.Lens type Forw ard voltage V F(V ) λp(nm ) TY P IV (m cd) TY P IF (m A ) IF (m A ) IF (m A ) (M H Z)V R (V ) IR (µA ) M A X C t(pF) TY P ∆λ(nm ) TY P Peak em ission w avelength Lum inous intensity Spectrum radiation bandw idth R everse current Page for characteristics diagram s Term inal capacitance (Ta=25˚C ) R adiation color M ilky diffusion Y ellow -green Y ellow -green Y ellow -green R ed(H igh-lum inosity) R ed R ed R ed Y ellow n Electro-optical Characteristics (Unit : mm) (Ta=25˚C) 3.35 2.9mm, 1.1mm Thickness, Milky Diffusion, Dichromatic Chip LED Devices

(Notice) \ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) \ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams N ote)C haracteristics show n in diagram s are typical values. (not assurance value) PR series H D series -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C ) -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C )

(Notice) \ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) \ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams Note)Characteristics shown in diagrams are typical values. (not assurance value) UR series TR series (1F=20mA) 200 100 500 1000 -20 0 20 40 60 100 80 Luminous Intensity vs. Ambient Temperature(Note) Ambient temperature Ta(˚C) Relative luminous intensity(%) 0.5 100 Forward Current vs. Forward Voltage(Note) Forward voltage VF(V) Forward current IF(mA) (Ta=25˚C) Luminous Intensity vs. Forward Current(Note) Forward current IF(mA) Relative luminous intensity(%) (Ta=25˚C) -20 0 20 40 60 100 80 85 Forward Current Derating Curve Ambient temperature Ta(˚C) Forward current IF(mA) 100 200 300 400 500 600 700 -20 0 20 40 60 100 80 Peak Forward Current Derating Curve Ambient temperature Ta(˚C) Peak forward current IFM (mA) 1/50 1/20 1/10 1/5 1/2 1 Duty Ratio vs. Peak Forward Current Duty ratio DR Peak forward current IF(mA) (Ta=25˚C) -25 0 25 50 75 85 125 100 Peak Forward Current Derating Curve Ambient temperature Ta(˚C) Peak forward current IFM (mA) -25 0 25 50 75 85 125 100 Forward Current Derating Curve Ambient temperature Ta(˚C) Forward current IF(mA) 0.1 0.5 1.0 5.0 100 Forward Current vs. Forward Voltage(Note) Forward voltage VF(V) Forward current IF(mA) (Ta=25˚C) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120 100 Luminous Intensity vs. Ambient Temperature(Note) Ambient temperature Ta(˚C) Relative luminous intensity(%) (Ta=25˚C) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Luminous Intensity vs. Forward Current(Note) Forward current IF(mA) Relative luminous intensity(%) (Ta=25˚C) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 Duty Ratio vs. Peak Forward Current Duty ratio DR Peak forward current IFM (mA) (Ta=25˚C) 200 100 500 200 100 500 0.1 0.2 0.5 12 5 1 0 2 0 5 0

LED Lamp Characteristics Diagrams N ote)C haracteristics show n in diagram s are typical values. (not assurance value) H S series H Y series 0.5 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 200 100 500 1000 -20 0 20 40 60 10080 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (IF=20m A ) 200 100 500 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 100 300 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IF(m A ) (Ta=25˚C ) -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C ) 119 (Notice) ¡ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) N ote)C haracteristics show n in diagram s are typical values. (not assurance value)

(Notice) ¡ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams EG series -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C ) N ote)C haracteristics show n in diagram s are typical values. (not assurance value) KG series -25 0 25 50 75 85 125100 Peak Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Peak forw ard current IFM (m A ) -25 0 25 50 75 85 125100 Forw ard C urrent D erating C urve A m bient tem perature Ta(˚C ) Forw ard current IF(m A ) 0.1 0.5 1.0 5.0 100 Forw ard C urrent vs. Forw ard V oltage(N ote) Forw ard voltage V F(V ) Forw ard current IF(m A ) (Ta=25˚C ) 1.0 5.0 100 500 1000 -20 0 20 40 60 80 120100 Lum inous Intensity vs. A m bient Tem perature(N ote) A m bient tem perature Ta(˚C ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1000 0.1 0.2 0.5 1 2 5 10 20 50 Lum inous Intensity vs. Forw ard C urrent(N ote) Forw ard current IF(m A ) R elative lum inous intensity(% ) (Ta=25˚C ) 1.0 5.0 2.0 100 200 500 1/50 1/20 1/10 1/5 1/2 1 D uty R atio vs. Peak Forw ard C urrent D uty ratio D R Peak forw ard current IFM (m A ) (Ta=25˚C ) N ote)C haracteristics show n in diagram s are typical values. (not assurance value)