LQ035Q7DB03

LQ035Q7DB03 SHARP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 24

Technical content

® Liquid Crystal Displays Group LQ035Q7DB03 TFT LCD Module (Model No.: LQ035Q7DB03) Spec. Issue Date: September 18, 2002 PRODUCT SPECIFICATIONS

㧹㧻㧰㧱㧸 㧺㨛㧦㧸㧽㧜㧟㧡㧽㧣㧰㧮㧜 3 㧿㧼㧱㧯 㧺㨛 㧦㧸㧯㧼㧙㧜㧞㧜㧝㧟 NO. PAGE SUMMARY NOTE 2002.09 .18 㧸㧯㧼㧙㧜㧞㧜㧝㧟 - - 1 st Issue sharp

ēĊėô÷ù÷øúʵøç NOTICE This publication is the proprietary of SHARP and is copyrighted, with all rights reserved. Under the copyrig ht laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical for any purpose, in whole or in part, without the express written permission of SHARP . Expre ss written permission is also required before any use of this publication may be made by a third party. The application circuit examples in this publication are provided to explain the representative applications of SHARP's devices and are not intended to guarantee any circuit design or permit any industrial property right or other rights to be executed. SHARP takes no responsibility for any problems related to any industrial proper ty right or a third party resulting from the use of SHARP's devices, except for those resulting directly from dev ice manufacturing processes. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects th at occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP's device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structures a nd other contents described herein at any time without notice in order to improve design or reliability. Contact SHAR P in order to obtain the latest specification sheets before using any SHARP's device. Manufacturing locations are a lso subject to change without notice. Observe the following points when using any device in this publication. SHARP takes no responsibility for damage caused by improper use of the devices. The devices in this publication are designed for use in general electronic equipment designs, such as: ɾPersonal computers ɾOffice automation ɾTelecommunication equipment ɾTest and measurement equipment ɾIndustrial control ɾAudio visual and multimedia equipment ɾConsumer electronics The appropriate design measures should be taken to ensure reliability and safety when SHARP's devices are used for equipment such as: ɾTransportation control and safety equipment(i.e., aircraft, trains, automobiles, etc.) ɾTraffic signals ɾGas leakage sensor breakers ɾAlarm equipment ɾVarious safety devices etc. SHARP's devices shall not be used for equipment that requires extremely high level of reliability, such as: ɾMilitary and space applications ɾNuclear power control equipment ɾMedical equipment for life support Contact a SHARP representative, in advance, when intending to use SHARP's devices for any "specif ic" applications other than those recommended by SHARP . Contact and consult with a SHARP representative if there are any questions about the contents of th is publication. sharp

ēĊėô÷ù÷øúʵùç (1) Application This literature applies to LQ035Q7DB03. (2) Overview This module is a color reflective and active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor), named AD-TFT(Advanced TFT). It is composed of a color TFT-LCD panel, driver ICs, an FPC, a back light and a back sealed casing. It isn’t composed control circuit. Graphics and texts can be displayed on a 240ʷ3ʷ320 dots panel with 262,144 colors by supplying. Optimum view angle is 6 o’clock. An inverted display mode is selective in the vertical or the horizontal direction. ʢ3ʣMechanical specifications Table 1 Parameter Specifications Units Remarks Screen size (Diagonal) 8.9 [3.52 ʡ] Diagonal cm Display active area 53.64ʢHʣʷ71.52ʢVʣ mm Pixel format 240(H)ʷ320(V) (1 pixel = R+G+B dots) pixels Pixel pitch 0.2235ʢHʣʷ0.2235ʢVʣ mm Pixel configuration R,G,B vertical stripe Unit outline dimension 65.0(W)ʷ85.0(H)ʷ3.4 (D) mm ʲNote3-1ʳ Mass 40 ̶ TYP. Surface hardness 3H ʲNote 3-1ʳ Excluding protrusion. For detailed measurements and tolerances, please refer to Fig. 1. (4)Pixel configuration R G B Display area FPC (240,1)(1,1) (240,320)(1,320) sharp

ēĊėô÷ù÷øúʵúç (5)Input/Output terminal 5-1)TFT-LCD panel driving section Table2 Pin No. Symbol I/O Description Remarks

1 VDD ʵ Power supply of gate driver(high level)

2 AGND ʵ

3 MOD I Control signal of gate driver ʲNote5-1ʳ

4 MOD I Control signal of gate driver ʲNote5-1ʳ

5 U/L I Selection for vertical scanning direction ʲNote5-2ʳ

6 SPS I Start signal of gate driver

7 CLS I Clock signal of gate driver

8A G N D ʵ

9 VEE ʵ Power supply of gate driver(low level)

10 VEE - Power supply of gate driver(low level)

11 VCOM I Common electrode driving signal

12 VCOM I Common electrode driving signal

13 SPL I/O Sampling start signal

14 R0 I RED data signal(LSB)

15 R1 I RED data signal

16 R2 I RED data signal

17 R3 I RED data signal

18 R4 I RED data signal

19 R5 I RED data signal(MSB)

20 G0 I GREEN data signal(LSB)

21 G1 I GREEN data signal

22 G2 I GREEN data signal

23 G3 I GREEN data signal

24 G4 I GREEN data signal

25 G5 I GREEN data signal(MSB)

26 B0 I BLUE data signal(LSB)

27 B1 I BLUE data signal

28 B2 I BLUE data signal

29 B3 I BLUE data signal

30 B4 I BLUE data signal

31 B5 I BLUE data signal(MSB)

32 VSHD ʵ Power supply of digital

33 DGND ʵ Ground(digital)

34 PS I Power save signal

(Please don’t carry out use by “Low” fixation)

35 LP I Data latch signal of source driver

36 DCLK I Data sampling clock signal

37 LBR I Selection for horizontal scanning direction ʲNote5-3ʳ

38 SPR I/O Sampling start signal

39 VSHA ʵ Power supply(analog)

ēĊėô÷ù÷øúʵûç Pin No. Symbol I/O Description Remarks

40 AGNDç ʵ

41 AGNDç ʵ

42 REV I reverse control signal

43 COM O Produce REV signal with the amplitude of AGNDʵVSHA

44 AGNDç ʵ

45 AGNDç ʵ

46 AGNDç ʵ

47 AGNDç ʵ

48 AGNDç ʵ

49 AGNDç ʵ

50 AGND ʵ Ground(Analog)

ʲNote5-1ʳSee section(7-1)-(A) ”˞Cautions when you turn on or off the power supply”. ʲNote5-2ʳSelection for vertical scanning direction U/L Scanning direction (Pixel configuration) Low Normal scanning ( X , 1 ) ççççççççç ˣ ( X , 320 ) High Inverted scanning ( X , 1) ˢ çççççççç ( X , 320) ç ʲNote5-3ʳSelection for horizontal scanning direction LBR SPL SPR Scanning direction (Pixel configuration) High Input Output Normal scanning (1,Y) ˠ (240,Y) Low Output Input Inverted scanning (1,Y) ˡ (240,Y) 5-2)Back light driving section Table3 Pin No. Symbol I/O Description Remark

1 VL1 I Power supply for LED (High voltage)

̎ N.C ʵʵ 3 N.C ʵʵ

4 VL2 I Power supply for LED (Low voltage)

5 N.C ʵʵ sharp

ēĊėô÷ù÷øúʵüç (6)Absolute Maximum Ratings Table 4 Parameter Symbol Condition Ratings Unit Remark Power supply(source/Analog) VSHA Ta=25ˆ -0.3ʙ+7.0 V Power supply(source/Digital) VSHD Ta=25ˆ -0.3ʙ+7.0 V Power supply (gate) VDD Ta=25ˆ -0.3ʙ+35.0 V Power supply (gate) VDD-VEE Ta=25ˆ -0.3ʙ+35.0 V Input voltage (Digital) VID Ta=25ˆ -0.3ʙVSHD+0.3 V [Terminalᶃ] Operating temperature (panel surface ʣ ̩opp ʵ -10ʙ60 ˆʲ Note6ʳ Storage temperature ̩stg ʵ -25ʙ70 ˆʲ Note6-2ʳ [Terminal ᶃ] MOD,U/L,SPS,CLS,SPL,R0ʙR5,G0ʙG5,B0ʙB5,LP ,DCLK,LBR,SPR,PS,REV ʲNote6-2ʳHumidity: 95%RH Max.(at Ta ʽ 40 ˆ). Maximum wet-bulb temperature is less than 39 ˆ (at Ta > 40ˆ). Condensation of dew must be avoided. sharp

ēĊėô÷ù÷øúʵýç (7)Electrical characteristics 7-1)Recommended operating conditions A) TFT-LCD panel driving section ççççççççççççççççççççç Table 5 ççççç ççççç GND=0V Parameter Symbol Min. Typ. Max. Unit Remarks Supply voltage for source driver (Analog) Supply voltage for source driver (Digital) Supply voltage for gate driver High voltage VDD +14.5 +15.0 +15.5 V Low voltage VEE -10.5 -10.0 -9.5 V Input voltage for Source driver (Low) VILS GND - 0.2VSHD V ʲNote 7-1ʳ Input voltage for Source driver (High) VIHS 0.8VSHD - VSHD V ʲNote 7-1ʳ Input current for Source driver (Low) I ILS -- 3 0 ЖA ʲNote 7-1ʳ IIHS1 -- 3 0 ЖA ʲNote 7-2ʳInput current for Source driver (High) IIHS2 - - 1200 ЖA ʲNote 7-3ʳ Input voltage for Gate driver (Low) VILG GND - 0.2VSHD V ʲNote 7-4ʳ Input voltage for Gate driver (High) VIHG 0.8VSHD - VSHD V ʲNote 7-4ʳ Input current for Gate driver (Low) I ILG --4 ЖA ʲNote 7-4ʳ Input current for Gate driver (High) I IHG --4 ЖA ʲNote 7-4ʳ Common electrode AC component VCOMAC - ʶ2.5 ʶ2.6 Vp-p ʲNote 7-5ʳ driving signal DC component VCOMDC -0.4 +0.6 +1.6 V ʲNote 7-5ʳ ˞çCautions when you turn on or off the power supply ᶃçTurn on or off the power supply with simultaneously or the following sequence. Turn on ʜ VSHD ˠVSHA ˠ VEE ˠ VDD Turn off ʜ VDD ˠ VEE ˠ VSHAˠ VSHD ᶄçThe input signal of “MOD” Terminals(Pin No.3 and No.4) must be low voltage when turning on the power supply, and it is held until more than double vertical periods after VCC is turned on completely. After then, it must be held high voltage until turning off the power supply.(Connect Pin No.3 and No.4 terminals to the same signal.) ʲNote 7-1ʳDCLK,SPL,SPR,LBR,LP ,PS,REV,R0ʙR5,G0ʙG5 and B0ʙB5 terminals are applied. ʲNote 7-2ʳDCLK,SPL,SPR,LBR,LP ,REV,R0ʙR5,G0ʙG5 and B0ʙB5 terminals are applied. ʲNote 7-3ʳPS terminal is applied. ʲNote 7-4ʳMOD,CLS,SPS and U/L terminals are applied. ʲNote 7-5ʳVCOMAC should be alternated on VCOMDC every 1 horizontal period and 1 vertical period. VCOMDC bias is adjusted so as to minimize flicker or maximum contrast every each module . B) Back light driving section Table 6 Ta=25ˆ Parameter Symbol MIN TYP MAX Units Remarks terminal LED voltage V L ʵ 21.6 24 V LED current I L ʵ 15 20 ̼A Power consumption W L ʵ 0.324 ʵ W ʲNote 7-6ʳ ʲNote 7-6ʳCalculated reference value(ILʷVL) ççççççç sharp

ēĊėô÷ù÷øúʵþç 7-2) Timing Characteristics of input signals Table 7 AC Characteristics (1) ççççççççç (VSHA=+5V, VSHD=+3.3V, Ta=25ˆ) Parameter Symbol Min. Typ. Max. Unit Remark Clock frequency of source driver fCK 4.5 ʵ 6.8 MHz Rising time of clock Tcr ʵʵ 20 ns Falling time of clock Tcf ʵʵ 20 ns Pulse width (High level) Tcwh 40 ʵʵ ns Pulse width (Low level) Tcwl 40 ʵʵ ns DCLK Frequency of start pulse fsp 16.5 ʵ 28 kHz Setup time of start pulse Tsusp 15 ʵʵ ns Hold time of start pulse Thsp 10 ʵʵ ns Pulse width of start pulse Twsp ʵʵ 1.5/fCK ns SPL,SPR ʲNote 7-7ʳ Setup time of latch pulse Tsulp 20 ʵʵ ns Hold time of latch pulse Thlp 20 ʵʵ ns LP Pulse width of latch pulse Twlp 60 ʵʵ ns Setup time of PS Tsups 0 ʵ 59 Жs Source driver Hold time of PS Thps 0 ʵ 1 Жs PS Set up time of data Tsud 15 ʵʵ ns Hold time of data Thd 10 ʵʵ ns R0ʙR5,G0ʙG5 ,B0ʙB5 Clock frequency fcls 16.5 ʵ 28 kHz Pulse width of clock(Low) Twlcls 5 ʵ (1/fclk)-30 Жs Pulse width of clock(High) Twhcls 30 ʵʵЖ s Rising time of clock Trcls ʵʵ 100 ns Falling time of clock Tfcls ʵʵ 100 ns Setup time of clock Tsucls 3 ʵʵЖ s Hold time of clock Thcls 0 ʵʵЖ s CLS Frequency of start pulse fsps 50 ʵ 86 Hz Setup time of start pulse Tsu 100 ʵʵ ns Hold time of start pulse Th 300 ʵʵ ns Rising time of start pulse Trsp ʵʵ 100 ns Gate driver Falling time of start pulse Tfsp ʵʵ 100 ns SPS Vcom Setup time of Vcom Tsuvcom 3 ʵʵЖ s Vcom Hold time of Vcom Thvcom 1 ʵʵЖ s ʲNote 7-7ʳThere must be only one up-edge of DCLK (includes Tsusp and Thsp time) in the period of SPL=”Hi”. sharp

ēĊėô÷ù÷øúʵÿç Fig.(a) Horizontal timing chart ěľijķç ěĺļĺķçě įĺķç ïøóĵðç ïùóĵðç ïùû÷óĵðç ïøóĵòø ěľijķç ěįijķç ěĺļijķç ěĺļīçě įīç ěĪľijçě Īľįç ěĪįçě ĪĹç /i20 /i20/i22/i18 ěľĺķç ěľįç ěľijç /i38/i37/i46/i45 /i46/i50 /i53/i50/i46 /i52/i18 /i14890 /i52/i23 /i41/i18 /i14890 /i41/i23 /i36/i18 /i14890 /i36/i23 /i37/i46/i53 /i50/i53 /i56/i37/i49/i47 ěįĪijĺç ěĺļĪijĺç ěĺļķĺçě įķĺç ěĺļĽĪĶĴç ěįĽĪĶĴç /i19 sharp

ēĊėô÷ù÷øúʵĀç Fig.(b) Vertical timing chart /i19 ěĺļĺķĺç ěľijķç ěįijķĪIJç /i37/i46/i53 /i53/i50/i53 /i20 /i26/i27 /i21/i20/i25 ěįĺķĺç ěĹĪijĺçě ĭĪijĺç ěĹĺķĺçěĭĺķĺç 㨪 㨪 㨪 /i19 /i20 ěĭĪijĺç øç ěľijĪijĺç ěľįĪijĺç .+0' .+0' .+0' ěĭĺķĺç øç /i52/i18 /i14890 /i52/i23 /i41/i18 /i14890 /i41/i23 /i36/i18 /i14890 /i36/i23 0QPFKURNC[RGTKQF 0QPFKURNC[RGTKQF sharp

ēĊėô÷ù÷øúʵø÷ç 7-3)Power consumption Measurement condition : SPS=60Hz,CLS=15.73kHz,SPL=15.73kHz,DCLK=6.3MHz The term of PS=”Lo” in one horizontal period ʜ 37Жsec(234DCLK) Ta=25 ˆ Table 8 when normal scan mode Parameter Sym Conditions MIN TYP MAX Unit Remarks Analog ISHA VSHA=+5.0V ʵ 3.0 6.5 mA ʲNote 7-8ʳSource current Digital ISHD VSHD=+3.3V ʵ 2.0 3.5 mA ʲNote 7-8ʳ High IDD VDD=+15.0V ʵ 0.05 0.10 mA ʲNote 7-9ʳGate current Low IEE VEE=-10.0V ʵ ʵ0.05 ʵ0.10 mA ʲNote 7-9ʳ ʲNote 7-8ʳVertical stripe pattern alternating 21 gray scale (GS21) with 42 gray scale (GS42) every 1 dot. ʲNote 7-9ʳ64-Gray-bar vertical pattern (GS0 ʙ GS63 for horizontal way) sharp

ēĊėô÷ù÷øúʵøøç (̔)Input Signals, Basic Display Color and Gray Scale of Each Color Table 9 Colors & Data signal Gray scale Gray Scale R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 Black ʵ 000000000000000000 Blue ʵ 000000000000111111 Green ʵ 000000111111000000 Cyan ʵ 000000111111111111 Red ʵ 111111000000000000 Magenta ʵ 111111000000111111 Yellow ʵ 111111111111000000 Basic color White ʵ 111111111111111111 Black GS0 0 0 0 0 00000000000000 × G S 1 100000000000000000 Darker GS2 0 1 0 0 00000000000000 ×È È È È ØÈ È È È Brighter GS61 1 0 1 1 11000000000000 Ø GS62 0 1 1 1 11000000000000 Gray Scale of red Red GS63 1 1 1 1 11000000000000 Black GS0 0 0 0 0 00000000000000 × G S 1 000000100000000000 Darker GS2 0 0 0 0 00010000000000 ×È È È È ØÈ È È È Brighter GS61 0 0 0 0 00101111000000 Ø GS62 0 0 0 0 00011111000000 Gray Scale of green Green GS63 0 0 0 0 00111111000000 Black GS0 0 0 0 0 00000000000000 × G S 1 000000000000100000 Darker GS2 0 0 0 0 00000000010000 ×È È È È ØÈ È È È Brighter GS61 0 0 0 0 00000000101111 Ø GS62 0 0 0 0 00000000011111 Gray Scale of bleu Bleu GS63 0 0 0 0 00000000111111 0 :Low level voltage 1 :High level voltage Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the combination of total 18 bit data signals, the 262,144-color display can be achieved on the screen. sharp

ēĊėô÷ù÷øúʵøùç (9)Optical characteristics 9-1)Not driving the Back light condition Table 10 Ta=25 °C Parameter Symbol Condition Min Typ Max Unit Remarks θ21,22 35 50 - degree [Note 9-1,2] θ11 CR ≥2 35 50 - degree Viewing angle range θ12 35 50 - degree Contrast ratio CRmax θ =0° 6 15 - [Note 9-2,4] Response Rise τ r - 30 60 ms [Note 9-3] time Fall τ d - 50 100 ms White chromaticity x 0.26 0.31 0.36 [Note 9-4] y θ =0° 0.29 0.34 0.39 Reflection ratio R θ =0° 8 13 - % [Note 9-5] * The measuring method of the optical characteristics is shown by the following figure. * A measurement device is Otsuka luminance meter LCD5000.(With the diffusion reflection unit.) Center of display Measuring method (a) for optical characteristics Photodetector (with luminosity correction system)ç Module Chemical coated surface (Optical diffusion treatment) A diffusion beam A diffusion beam Normal line A beam (through an optical fiber) sharp

ēĊėô÷ù÷øúʵøúç 9-2)Driving the Back light condition Table 11 Ta=25 °C Parameter Symbol Condition Min Typ Max Unit Remarks θ21,22 30 40 - degree [Note 9-1,2,6] θ11 CR ≥2 40 50 - degree Viewing angle range θ12 30 40 - degree Contrast ratio Crmax θ = 0° 55 85 - [Note 9-2] Response Rise τ r - 30 60 ms [Note 9-3] time Fall τ d - 50 100 ms White chromaticity x 0.27 0.32 0.37 y 0.29 0.34 0.39 Brightness Y θ = 0° ʵ 55 - (cd/m2) I L=20mA LED life time LL IL=15mA ʵ 10000 ʵ hour [Note 9-7] * The measuring method of the optical characteristics is shown by the following figure. * A measurement device is TOPCON luminance meter BM-5(A).(Viewing cone 1) Measuring method (c) for optical characteristics Photodetector(including luminosity facter) Center LCD module sharp

ēĊėô÷ù÷øúʵøûç [Note 9-1] Viewing angle range is defined as follows. /i14818 o’clock direction /i496 12 /i496 22 /i496 11 /i496 21 Normal line Definition for viewing angle [Note 9-2] Definition of contrast ratio: The contrast ratio is defined as follows: Photodetecter output with all pixels white(GS63) Contrast ratio(CR)= Photodetecter output with all pixels black(GS0) ççç V COMAC=5.0Vp-p [Note 9-3] Definition of response time: The response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white". 10% 90% 100% Black WhiteWhite τ dτ r Time Photodetecter output (arbitrary unit) sharp

ēĊėô÷ù÷øúʵøüç [Note 9-4] A measurement device is Minolta CM-2002. [Note 9-5] Definition of reflection ratio Reflection ratio = [Note 9-6] A measurement device is ELDIM EZContrast [Note 9-7]This is the reference vlue. The White-LED life time is defind as a time when brightness not to become under 50% of the original value(at Ta=25ˆ) (10)Display quality The display quality of the color TFT-LCD module shall be in compliance with the Incoming Inspection Standards for TFT-LCD.. (11)Mechanical characteristics 11-1) External appearance See Fig. 1 11-2) FPC (for LCD panel) characteristics (1)Specific connector FH12A-50S-0.5SH(HIROSE) (2) Bending endurance of the bending slits portion No line of the FPC is broken for the bending test (Bending radius=0.6mm and angle=90°) in 30 cycles. Light detected level of the reflection by the LCD module Light detected level of the reflection by the standard white board sharp

ēĊėô÷ù÷øúʵøýç (12)Handling Precautions 12-1) Insertion and taking out of FPCs Be sure insert and take out of the FPC into the connector of the set after turning off the power supply on the set side. 12-2) Handling of FPCs The FPC for LCD panel shall be bent only slit portion. The bending slit shall be bent uniformly on the whole slit portion with bending radius larger than 0.6mm ,and only inner side (back side of the module). Don’t bend it outer side (display surface side). Don’t give the FPCs too large force, for example, hanging the module with holding FPC. 12-3) Installation of the module On mounting the module, be sure to fix the module on the same plane. Taking care not to warp or twist the module. 12-4)Precaution when mounting (1) If water droplets and oil attaches to it for a long time, discoloration and staining occurs. Wipe them off immediately. (2) Glass is used for the TFT-LCD panel. If it is dropped or bumped against a hard object, it may be broken. Handle it with sufficient care. (3)As the CMOS IC is used in this module, pay attention to static electricity when handling it. Take a measure for grounding on the human body. 12-5)Others (1) The liquid-crystal is deteriorated by ultraviolet rays. Do not leave it in direct sunlight and strong ultraviolet rays for many hours. (2) If it is kept at a temperature below the rated storage temperature, it becomes coagulated and the panel may be broken. Also, if it is kept at a temperature above the rated storage temperature, it becomes isotropic liquid and does not return to its original state. Therefore, it is desirable to keep it at room temperature as much as possible. (3) If the LCD breaks, don’t put internal liquid crystal into the mouth. When the liquid crystal sticks to the hands, feet and clothes, wash it out immediately. (4) Wipe off water drop or finger grease immediately. Long contact with water may cause discoloration or spots. (5) Observe general precautions for all electronic components. (6) VCOM must be adjusted on condition of your final product. No adjustment causes the deterioration for display quality. (7) Static image should not be displayed more than 5 minutes in order to prevent from occurrence of residual image. sharp

ēĊėô÷ù÷øúʵøþç (13)Reliability Test Conditions for TFT-LCD Module Table 12 No. Test items Test conditions

1 High temperature storage test Ta=+70ˆ 240h

2 Low temperature storage test Ta=-25ˆ 240h

3 High temperature and hi gh

Tp=+40ˆ , 95%RH 240h (But no condensation of dew)

4 High temperature operati ng

Tp=+60ˆ 240h

5 Low temperature operating test Tp=-10ˆ 240h

6 Electro static discharge test ʶ200Vɾ200pF(0Њ) 1 time for each terminals

7 Shock tset 980 m/s 2, 6 ms

ʶX,ʶY,ʶZ 3 times for each direction (JIS C0041, A-7 Condition C)

8 Vibration test Frequency range: 10Hzʙ55Hz

Stroke: 1.5 mm Sweep: 10Hz ʙ55Hz X,Y,Z 2 hours for each direction (total 6 hours) (JIS C0040,A-10 Condition A)

9 Heat shock test Ta=-25ˆʙ+70ˆ / 5 cycles

ç (1h) (1h) ʲNoteʳTa = Ambient temperature, Tp = Panel temperature ʲCheck itemsʳ ɾTest No.1ʙ9 In the standard condition, there shall be no practical problems that may çç affect the display function. sharp

.%2㧙 (14) Others 14-1)Indication of lot number The lot number is shown on a label. Attached location is shown in Fig.1 (Outline Dimensions). I n d i c a t e d c o n t e n t s o f t h e l a b e l L Q 0 3 5 Q 7 D B 0 3 ٤٤٤٤٤٤٤٤ m o d e l N o . l o t N o . 14-2) Used Regulation of Chemical Substances Breaking Ozone Stratum Substances with the object of regulating : CFCS, Carbon tetrachloride, Halon 1 , 1 , 1 - T r i c h l o r o e t h a n e ( M e t h y l c h l o r o f o r m ) (a) This LCD module, Constructed part and Parts don’t contain the above substances. (b) This LCD module, Constructed part and Parts don’t contain the above substances in processes of manufacture. 14-3) If some problems arise about mentioned items in this document and other items, the user of the TFT-LCD module and Sharp will cooperate and make efforts to solve the problems with mutual r e s p e c t a n d g o o d w i l l . 15)Forwarding form a) Piling number of cartons : Max 20 b) Package quality in one cartons : 50pcs c) Carton size :503mm x 373mm x 88mm d) Total mass of 1 carton filled with full modules : 㧟㧟㧜㧜㨓 Conditions for storage. E n v i r o n m e n t (1)Temperature : 0 㨪40͠ (2)Humidity : 60%RH or less (at 40 ͠) N o d e w c o n d e n s a t i o n a t l o w t e m p e r a t u r e a n d h i g h h u m i d i t y . (3)Atmosphere : Harmful gas, such as acid or alkali which bites electronic c o m p o n e n t s a n d / o r w i r e s , m u s t n o t b e d e t e c t e d . ( 4 ) P e r i o d : a b o u t 3 m o n t h s (5)Opening of the package : In order to prevent the LCD module from breakdown by e l e c t r o s t a t i c c h a r g e s , p l e a s e c o n t r o l t h e r o o m h u m i d i t y o v e r 5 0 % R H a n d o p e n t h e p a c k a g e t a k i n g s u f f i c i e n t c o u n t e r m e a s u r e s a g a i n s t e l e c t r o s t a t i c c h a r g e s , s u c h a s e a r t h , e t c . sharp

࿑㧝 ᄖᒻኸᴺ࿑ LQ035Q7DB03

࿑㧞 ൮ⵝᒻᘒ࿑ LQ035Q7DB03 sharp

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. Suggested applications (if any) are for standard use; See Important Restrictions for limitations on special applications. See Limited Warranty for SHARP’s product warranty. The Limited Warranty is in lieu, and exclusive of, all other warranties, express or implied. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY EXCLUDED. In no event will SHARP be liable, or in any way responsible, for any incidental or consequential economic or property damage. NORTH AMERICA EUROPE JAPAN SHARP Microelectronics of the Americas 5700 NW Pacific Rim Blvd. Camas, WA 98607, U.S.A. Phone: (1) 360-834-2500 Fax: (1) 360-834-8903 Fast Info: (1) 800-833-9437 www.sharpsma.com SHARP Microelectronics Europe Division of Sharp Electronics (Europe) GmbH Sonninstrasse 3

20097 Hamburg, Germany

Phone: (49) 40-2376-2286 Fax: (49) 40-2376-2232 www.sharpsme.com SHARP Corporation Electronic Components & Devices 22-22 Nagaike-cho, Abeno-Ku Osaka 545-8522, Japan Phone: (81) 6-6621-1221 Fax: (81) 6117-725300/6117-725301 www.sharp-world.com TAIWAN SINGAPORE KOREA SHARP Electronic Components (Taiwan) Corporation 8F-A, No. 16, Sec. 4, Nanking E. Rd. Taipei, Taiwan, Republic of China Phone: (886) 2-2577-7341 Fax: (886) 2-2577-7326/2-2577-7328 SHARP Electronics (Singapore) PTE., Ltd. 438A, Alexandra Road, #05-01/02 Alexandra Technopark, Singapore 119967 Phone: (65) 271-3566 Fax: (65) 271-3855 SHARP Electronic Components (Korea) Corporation RM 501 Geosung B/D, 541 Dohwa-dong, Mapo-ku Seoul 121-701, Korea Phone: (82) 2-711-5813 ~ 8 Fax: (82) 2-711-5819 CHINA HONG KONG SHARP Microelectronics of China (Shanghai) Co., Ltd.

28 Xin Jin Qiao Road King Tower 16F

Pudong Shanghai, 201206 P.R. China Phone: (86) 21-5854-7710/21-5834-6056 Fax: (86) 21-5854-4340/21-5834-6057 Head Office: No. 360, Bashen Road, Xin Development Bldg. 22 Waigaoqiao Free Trade Zone Shanghai 200131 P.R. China Email: smc@china.global.sharp.co.jp SHARP-ROXY (Hong Kong) Ltd. 3rd Business Division, 17/F, Admiralty Centre, Tower 1

18 Harcourt Road, Hong Kong

Phone: (852) 28229311 Fax: (852) 28660779 www.sharp.com.hk Shenzhen Representative Office: Room 13B1, Tower C, Electronics Science & Technology Building Shen Nan Zhong Road Shenzhen, P.R. China Phone: (86) 755-3273731 Fax: (86) 755-3273735