LMT018DNBFWD-1

LMT018DNBFWD-1 TOPWAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 1 of 13 LMT018DNBFWD-1 LCD Module User Manual Prepared by: Deng Junjie Checked by: Approved by: Date: 2014-07-14 Date: Date: Rev. Descriptions Release Date

0.1 Preliminary New release 2014-07-14

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 2 of 13 Table of Content

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 3 of 13 1. Basic Specifications Note: *1. For saturated color display content (eg. pure-red, pure-green, pure-blue or pure-colors-combinations). *2. For “color scales” display content. *3. Color tone may slightly change by temperature and driving condition. Block Diagram Screen Size(Diagonal) : 1.8 ” Color Depth: 65k / 262k color Number of dots : 128 x 160 Active Area : 28.03x35.04 mm Dot Pitch : 0.219x0.219 mm Display Technology : a-Si TFT active matrix Display Mode : Transmissive / Positive Pixel Configuration : RGB Stripe Viewing Direction : 6H (*1) (gray scale inverse) 12H (*2) Polarizer Surface Treatment: Glare Backlight Type: LEDs Outline Dimension : 34.0 x 52.33 x 4.7 mm (exclude FPC , see dwg for details) Operating Temperature : -20 ~ +70 °C (No Condensation) Storage Temperature : -30 ~ +80 °C (No Condensation) BLA, BLK VDD ILI9163C or equivalent VSS /WR,/RD,DB0~DB7 /CS, /RES, D/C TFT Panel 128(RGB)×160 Backlight Circuit

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 4 of 13 Terminal Functions Pin No. PIN Name I/O Descriptions

1 BLK Power Negative power for LED backlight

2 BLA Power Positive power for LED backlight

3 VSS Power Negative power supply,0V

4 VDD Power Positive power supply

5 NC - No connection leave open

6 NC - No connection leave open

/CS=L, enable access to the LCD module /CS=H, disable access to the LCD module 8 /RES Input Reset signal /RES = L, Initialization is executed /RES = H, Normal running.

9 D/C Input Register Select

D/C = H, Transferring the Display Data D/C = L, Transferring the Control Data 10 /WR Input Write enable input, active LOW 11 /RD Input Read enable input, active LOW

12 DB7 IO

: : :

19 DB0 IO

Bi-directional tri-state Data bus

20 VSS Power Negative power supply,0V

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 5 of 13 2. Absolute Maximum Ratings Items Symbol Min. Max. Unit Condition Supply Voltage V DD -0.3 +4.6 V V SS = 0V Input Voltage V IN -0.3 +4.6 V V SS = 0V Operating Temperature T OP -20 +70 °C No Condensation Storage Temperature T ST -30 +80 °C No Condensation Cautions: Any Stresses exceeding the Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. 3. Electrical Characteristics DC Characteristics VSS=0V, TOP=25°C Items Symbol MIN. TYP. MAX. Unit Condition / Application Pin Operating Voltage V DD 2.6 2.8 3.3 V VDD Input High Voltage V IH 0.8xV DD - V DD V Input Low Voltage V IL V SS - 0.2xV DD V /RES, /CS, D/C, DB0~DB7,/WR,/RD Operating Current I DD - 0.6 2.5 mA VDD (*1) Note: *1. VDD=2.8V LED Backlight Circuit Characteristics BLK=0V, IfBLA=30mA, TOP =25°C Items Symbol MIN. TYP. MAX. Unit Applicable Pin Forward Voltage Vf BLA - 3.2 - V BLA Forward Current If BLA - 30 - mA BLA X 0.270 - 0.315 - Color Coordinate (White) Y 0.270 - 0.315 - Uniformity ∆Bp 80% - - - Cautions: Exceeding the recommended driving current could cause substantial damage to the backlight and shorten its lifetime. BLK BLA No. of LEDs = 2pcs

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 6 of 13 AC Characteristics

8080 Mode System Bus Timing

Note: *1. Input signal rise/fall time should be less than 15ns . *2. All timing is using 20% and 80% of VDD as the reference. *3. Please refer to ILI9163B datasheet for details

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 7 of 13 Reset Timing Item Symbol MIN. TYP. MAX. Unit Reset LOW pulse width t RW 1.0 - - us Reset time T RT - - 120 ms 4. Optical Characteristics Item Symbol Min. Typ. Max. Unit Note/ Condition Brightness Bp 190 - - Cd/m 2 Uniformity △Bp 80% - - - θ =0°, Φ=0° (*1,*2) θ 1(Ф =90°or 270°) -50〜+40 Deg Viewing Angle θ 2(Ф (*3) Contrast Ratio Cr - 350 - - θ =0°, Φ=0° (*4) Response Time Tr++Tf - 30 - Ms θ =0°, Φ=0° (*5) X 0.246 0.296 0.346 Color of CIE Coordinate W Y 0.265 0.315 0.365 θ =0°, Φ=0° (*1, *6) NTSC Ratio S 42% - - - θ =0°,Φ=0° (*1, *6) Note: *1. Measurement The data are measured after LEDs are turned on for 5 minutes. LCM displays full white. The brightness is the average value of 9 measured spots. Measurement equipment PR-705 (Φ8mm) Measuring condition: - Measuring surroundings: Dark room. - Measuring temperature: Ta=25 ℃. - Adjust operating voltage to get optimum contrast at the center of the display. Measured value at the center point of LCD panel after more than 5 minutes while backlight turning on. *2. The luminance uniformity It is calculated by using following formula. △Bp = Bp (Min.) / Bp (Max.)×100 (%) Bp (Max.) = Maximum brightness in 9 measured spots Bp (Min.) = Minimum brightness in 9 measured spots. Measurement equipment PR-705 (Φ8mm) W 3W 3W 2W L 3L 2L 3L

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 8 of 13 *3. The definition of viewing angle: Refer to the graph below marked by θ and Ф *4. The definition of contrast ratio (Test LCM using PR-705): Luminance When LCD is at “White” state Contrast Ratio(CR)= Luminance When LCD is at “Black” state (Contrast Ratio is measured in optimum common electrode voltage) *5. Definition of Response time.(Test LCD using DMS501): The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of amplitudes. Refer to figure as below. *6: Definition of Color of CIE Coordinate and NTSC Ratio. area of RGB triangle S= area of NTSC triangle x100%

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 9 of 13 5. Functions Display Commands Code Command D17-D8 D7 D6 D5 D4 D3 D2 D1 D0 hex 00H NOP (No Operation) X 0 0 0 0 0 0 0 0 00h 01H SoftwareReset X 0 0 0 0 0 0 0 1 01h Read Display Id. Info x 0 0 0 0 0 1 0 0 04h 1st Parameter x x x x x x x x x x 2nd Parameter x ID17 ID16 ID15 ID14 ID13 ID12 ID11 ID10 54h 3rd Parameter x ID27 ID26 ID25 ID24 ID23 ID22 ID21 ID20 80h 04H 4th Parameter x ID37 ID36 ID35 ID34 ID33 ID32 ID31 ID30 66h Read Display Status x 0 0 0 0 1 0 0 1 09h 1st Parameter x x x x x x x x x x 2nd Parameter x BOTSON MY MX MV ML RGB MH ST24 00h 3rd Parameter x ST23 IFPF2 IFPF1 IFPF0 IDMON PTLON SLOUT NORON 61h 4th Parameter x VSSON ST14 INVON ST12 ST11 D ISON TEON GCS2 00h 09H 5th Parameter x GCS1 GCS0 TELOM HSON VSON PCKON DEON ST0 00h Read Display Power Mode x 0 0 0 0 1 0 1 0 0Ah 1st Parameter x x x x x x x x x X 0AH 2nd Parameter x BSTON IDMON PLTON SLPOUT NORON DISON D1 D0 08h Read Display MADCTL x 0 0 0 0 1 0 1 1 0Bh 1st Parameter x x x x x x x x x X 0BH 2nd Parameter x MY MX MV ML RGB MH D1 D0 00h Read Display Pixel Format x 0 0 0 0 1 1 0 0 0Ch 1st Parameter x x x x x x x x x x 0CH 2nd Parameter x VIPF3 VIPF2 VIPF1 VIPF0 D3 I FPF2 IFPF1 IFPF0 06h Read Display Image Mode x 0 0 0 0 1 1 0 1 0Dh 1st Parameter x x x x x x x x x x 0DH 2nd Parameter x VSSON D6 INVON D4 D3 GCS2 GCS1 GCS0 00h Read Display Signal Mode x 0 0 0 0 1 1 1 0 0Eh 1st Parameter x x x x x x x x x x 0EH 2nd Parameter x D7 D6 HSON VSON PCKON DEON D1 D0 00h Read Display Signal Mode x 0 0 0 0 1 1 1 1 0Fh 1st Parameter x x x x x x x x x x 0FH 2nd Parameter x RELD FUND D5 D4 D3 D2 D1 D0 00h 10H Sleep In x 0 0 0 1 0 0 0 0 10h 11H Sleep Out x 0 0 0 1 0 0 0 1 11h 12H Partial Mode On x 0 0 0 1 0 0 1 0 12h 13H Normal Display Mode On x 0 0 0 1 0 0 1 1 13h 20H Display Inversion Off x 0 0 1 0 0 0 0 0 20h 21H Display Inversion On x 0 0 1 0 0 0 0 1 21h Gamma Set x 0 0 1 0 0 1 1 0 26h 26H 1st Parameter x GC7 GC6 GC5 GC4 GC3 GC2 GC1 GC0 01h 28H Display Off 0 0 1 0 1 0 0 0 28h 29H Display On x 0 0 1 0 1 0 0 1 29h Column Address Set x 0 0 1 0 1 0 1 0 2Ah 1st Parameter x XS15 XS14 XS13 XS12 XS11 XS10 XS9 XS8 - 2nd Parameter x XS7 XS6 XS5 XS4 XS3 XS2 XS1 XS0 - 3rd Parameter x XE15 XE14 XE13 XE12 XE11 XE10 XE9 XE8 - 2AH 4th Parameter x XE7 XE6 XE5 XE4 XE3 XE2 XE1 XE0 - Page Address Set x 0 2Bh 1st Parameter x YS15 YS14 YS13 YS12 YS11 YS10 YS9 YS8 - 2nd Parameter x YS7 YS6 YS5 YS4 YS3 YS2 YS1 YS0 - 3rd Parameter x YE15 YE14 YE13 YE12 YE11 YE10 YE9 YE8 - 2BH 4th Parameter x YE7 YE6 YE5 YE4 YE3 YE2 YE1 YE0 -

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 10 of 13 Code Command D17-D8 D7 D6 D5 D4 D3 D2 D1 D0 hex Memory Write x 0 0 1 0 1 1 0 0 2Ch 1st Parameter D17-8 D7 D6 D5 D4 D3 D2 D1 D0 - 2CH Nth Parameter D17-8 D7 D6 D5 D4 D3 D2 D1 D0 - Color Setting for 4K, 65Kand 262K x 0 0 1 0 1 1 0 1 2Dh 1st Parameter x x x R005 R004 R003 R002 R001 R000 - : x x x Rnn5 Rnn4 Rnn3 Rnn2 Rnn1 Rnn0 - 32nd parameter x x x R315 R314 R313 R312 R311 R310 - 33rd Parameter x x x G005 G004 G003 G002 G001 G000 - : x x x Gnn5 Gnn4 Gnn3 Gnn2 Gnn1 Gnn0 - 96th Parameter x x x G635 G634 G633 G632 G631 G630 - 97th Parameter x x x B005 B004 B003 B002 B001 B000 : x x x Bnn5 Bnn4 Bnn3 Bnn2 Bnn1 Bnn0 - 2DH 128thParameter x x x B315 B314 B313 B312 B311 B310 - Memory Read x 0 0 1 0 1 1 1 0 2Eh 1st Parameter x x x x x x x x x - 2nd Parameter x D17 D16 D15 D14 D13 D12 D11 D10 - : x - 2EH Nth Parameter x Dn7 Dn6 Dn5 Dn4 Dn3 Dn2 Dn1 Dn0 - Partial Area x 0 0 1 1 0 0 0 0 30h 1st Parameter x PSL15 PSL14 PSL13 PSL12 PSL11 PSL10 PSL9 PSL8 - 2nd Parameter x PSL7 PSL6 PSL5 PSL4 PSL3 PSL2 PSL1 PSL0 - 3rd Parameter x PEL15 PEL14 PEL13 PEL12 PEL11 PEL10 PEL9 PEL8 - 30H 4th Parameter x PEL7 PEL6 PEL5 PEL4 PEL3 PEL2 PEL1 PEL0 - Vertical Scrolling Definition x 0 0 1 1 0 0 1 1 33h 1st Parameter x TFA15 TFA14 TFA13 TFA12 TFA11 TFA10 TFA9 TFA8 - 2nd Parameter x TFA7 TFA6 TFA5 TFA4 TFA3 TFA2 TFA1 TFA0 - 3rd Parameter x VSA15 VSA14 VSA13 VSA12 VSA11 VSA10 VSA9 VSA8 - 4th Parameter x VSA7 VSA6 VSA5 VSA4 VSA3 VSA2 VSA1 VSA0 - 5th Parameter x BFA15 BFA14 BFA13 BFA12 BFA11 BFA10 BFA9 BFA8 - 33H 6th Parameter x BFA7 BFA6 BFA5 BFA4 BFA3 BFA2 BFA1 BFA0 - 34H Tearing EffectLine Off x 0 0 1 1 0 1 0 0 34h Tearing EffectLine On x 0 0 1 1 0 1 0 1 35h 35H 1st Parameter x x x x x x x x M 00h Memory Access Control x 0 0 1 1 0 1 1 0 36h 36H 1st Parameter x MY MX MV ML RGB MH x x 00h VerticalScrolling StartAddress x 0 0 1 1 0 1 1 1 37h 1st Parameter x SSA15 SSA14 SSA13 SSA12 SSA11 SSA10 SSA9 SSA8 00h 37H 2nd Parameter x SSA7 SSA6 SSA5 SSA4 SSA3 SSA2 SSA1 SSA0 00h 38H Idle Mode Off x 0 0 1 1 1 0 0 0 38h 39H Idle Mode On x 0 0 1 1 1 0 0 1 39h Interface PixelFormat x 0 0 1 1 1 0 1 0 3Ah 3AH 1st Parameter x VIPF 3 VIPF2 VIPF1 VIPF0 D3 IFPF 2 IFPF1 IFPF0 66h Frame Rate Control (In normal mode/Full colors) 1 0 1 1 0 0 0 1 B1h 1st Parameter x x x D IVA4 D IVA3 D IVA2 D IVA1 D IVA0 x B1H 2nd Parameter x x VPA 5 VPA4 VPA3 VPA2 VPA1 VPA0 x Frame Rate Control (In Idle mode/8-colors) 1 0 1 1 0 0 1 0 B2h 1st Parameter x x x D IVB4 D IVB3 D IVB2 D IVB1 D IVB0 x B2H 2nd Parameter x x VPB 5 VPB4 VPB3 VPB2 VPB1 VPB0 x

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 11 of 13 Code Command D17-D8 D7 D6 D5 D4 D3 D2 D1 D0 hex Frame Rate Control (In Partial mode/full colors) 1 0 1 1 0 0 1 1 B3h 1st Parameter x x x D IVC4 D IVC3 D IVC2 D IVC1 D IVC0 x B3H 2nd Parameter x x VP C5 VPC4 VPC3 VPC2 VPC1 VPC0 x Display Inversion Control x 1 0 1 1 0 1 0 0 B4h B4H 1st Parameter x 0 0 0 0 0 NLA NLB NLC 02H RGB Interface Blanking Porch setting x 1 0 1 1 0 1 0 1 B5h 1st Parameter x x x HBP5 HBP4 HBP3 HBP2 HBP1 HBP0 08h 2nd Parameter x VBP7 VBP6 VBP5 VBP4 VBP3 VBP2 VBP1 VBP0 03h B5H 3rd Parameter x x x x x x x VBP9 VBP8 00h Display Function Set x 1 0 1 1 0 1 1 0 B6h 1st Parameter x x NO1 NO0 SDT1 SDT0 EQ1 EQ2 06h B6H 2nd Parameter x x x X x PTG0 PT1 PT0 02h Source Driver Direction Control x 1 0 1 1 0 1 1 1 B7h B7H 1st Parameter x 0 0 0 0 0 0 0 CRL 00h Gate Driver Direction Control x 1 0 1 1 1 0 0 0 B8h B8H 1st Parameter x 0 0 0 0 0 0 0 CTB 00h Power_ Control1 x 1 1 0 0 0 0 0 0 C0h 1st Parameter x 0 0 0 VRH4 VRH3 VRH2 VRH1 VRH0 x C0H 2nd Parameter x 0 0 0 0 0 VC2 VC1 VC0 02h Power_ Control2 x 1 1 0 0 0 0 0 1 C1h C1H 1st Parameter x 0 0 0 0 0 BT2 BT1 BT0 07h Power_ Control3 x 1 1 0 0 0 0 1 0 C2h C2H 1st Parameter x 0 0 0 0 0 APA2 APA1 APA0 00h Power_ Control4 x 1 1 0 0 0 0 1 1 C3h C3H 1st Parameter x 0 0 0 0 0 APB2 APB1 APB0 00h Power_ Control 5 x 1 1 0 0 0 1 0 0 C4h C4H 1st Parameter x 0 0 0 0 0 APC2 APC1 APC1 01h VCOM_ Control 1 x 1 1 0 0 0 1 0 1 C5h 1st Parameter x x VMH6 VMH5 VMH4 VMH3 VMH2 VMH1 VMH0 - C5H 2nd Parameter x 0 VML6 VML5 VML4 VML3 VML2 VML1 VML0 - VCOM_ Control 2 x 1 1 0 0 0 1 1 0 C6h C6H 1st Parameter x 0 0 VMA5 VMA4 VMA3 VMA2 VMA1 VMA0 13h/06h VCOM OffsetControl x 1 1 0 0 0 1 1 1 C7h C7H 1st Parameter 0 nVM* VMF6 VMF5 VMF4 VMF3 VMF2 VMF1 VMF0 40h Write ID4Value x 1 1 0 1 0 0 1 1 D3h 1st Parameter x x x x x x x x x x 2nd Parameter x ID417 ID416 ID415 ID414 ID413 ID412 ID411 ID410 91h 3rd Parameter x ID427 ID426 ID425 ID424 ID423 ID422 ID421 ID420 63h 4th Parameter x x x x x ID433 ID432 ID431 ID430 00h D3H 5th Parameter x x x x x x x x x x NV Memory Function Controller(1) x 1 1 0 1 1 0 1 0 D5h 1st Parameter x ID33 ID32 ID31 ID30 ID23 ID22 ID21 ID20 00h D5H 2nd Parameter x OTP_ BS 0 0 0 OTP_ VMF3 OTP_ VMF2 OTP_ VMF1 OTP_ VMF0 00h NV Memory Function Controller(2) x 1 1 0 1 1 0 1 0 D6h 1st Parameter x OTP_D[7 OTP_ D[6] OTP_ D[5] OTP_ D[4] OTP_ D[3] OTP_ D[2] OTP_ D[1] OTP_ D[0] 00h D6H 2nd Parameter x 0 0 0 0 0 0 OTP_ TP[1] OTP_ TP[0] 00h NV Memory Function Controller(3) x 1 1 0 1 1 0 1 0 D7h 1st Parameter x 0 1 0 1 0 1 0 1 55h 2nd Parameter x 1 0 1 0 1 0 1 0 AAh D7H 3rd Parameter x 0 1 1 0 0 1 1 0 66h

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 12 of 13 Code Command D17-D8 D7 D6 D5 D4 D3 D2 D1 D0 hex Read ID1 x 1 1 0 1 1 0 1 0 DAh 1st Parameter x x x x x x x x x x DAH 2nd Parameter x ID17 ID16 ID15 ID14 ID13 ID12 ID11 ID10 54h Read ID2 x 1 1 0 1 1 0 1 1 DBh 1st Parameter x x x x x x x x x x DBH 2nd Parameter x 1 ID26 ID25 ID24 ID23 ID22 ID21 ID20 80h Read ID3 x 1 1 0 1 1 1 0 0 DCh 1st Parameter x x x x x x x x x x DCH 2nd Parameter x ID37 ID36 ID35 ID34 ID33 ID32 ID31 ID30 66h Positive Gamma Correction Setting 1 1 1 0 0 0 0 0 E0h 1st Parameter x x VP0[5:0] - 2nd Parameter x x VP1[5:0] - 3rd Parameter x x VP2[5:0] - 4th Parameter x x VP4[5:0] - 5th Parameter x x VP6[5:0] - 6th Parameter x x x VP13[4:0] - 7th Parameter x VP20[6:0] - 8th Parameter VP36[3:0] VP27[3:0] - 9th Parameter x VP43[6:0] - 10th Parameter x VP50[5:0] - 11st Parameter x x VP57[5:0] - 12nd arameter x x VP59[5:0] - 13rd Parameter x x VP61[5:0] - 14th Parameter x x VP62[5:0] - E0H 15th Parameter x x VP63[5:0] - Negative Gamma Correction Setting 1 1 1 0 0 0 0 1 E1h 1st Parameter x x VN63[5:0] - 2nd Parameter x x VN62[5:0] - 3rd Parameter x x VN61[5:0] - 4th Parameter x x V59[5:0] - 5th Parameter x x VN57[5:0] 6th Parameter x x x VN50[4:0] 7th Parameter x x VN43[6:0] - 8th Parameter VN27[3:0] VN36[3:0] - 9th Parameter x VN20[6:0] - 10th Parameter x x VN13[5:0] - 11st Parameter x x VN6[5:0] - 12nd arameter x x VN4[5:0] - 13rd Parameter x x VN2[5:0] - 14th Parameter x x VN1[5:0] - E1H 15th Parameter x x VN0[5:0] - GAM_R_SEL 1 1 1 1 0 0 1 0 F2h F2H 1st Parameter x x x x x x x GAM_R_ SEL Write Notes: 1. There will be no abnormal visible effects on the display when S/W or H/W Reset are applied. 2. After Powered-On Reset finishes within 10%s after both VDD & VDDI are applied. 3. Mode 1 means Tearing Effect Output Line consists of V-Blanking Information only. 4. Please refer to ILI9163C datasheet for details Power off the LCD Module It recommends that enter Sleep Mode before power off the LCD module. Refreshing The LCD Module It recommends that the operating modes and display contents be refreshed periodically to prevent the effect of unexpected noise.

TOPWAY LCD Module User Manual LMT018DNBFWD-1 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LMT018DNBFWD-1-Manual-Rev0.1 Page: 13 of 13 6. Design and Handling Precaution 1. The LCD panel is made by glass. Any mechanical shock (eg. dropping form high place) will damage the LCD module. 2. Do not add excessive force on the surface of the display, which may cause the Display color change abnormally. 3. The polarizer on the LCD is easily get scratched. If possible, do not remove the LCD protective film until the last step of installation. 4. Never attempt to disassemble or rework the LCD module. 5. Only Clean the LCD with Isopropyl Alcohol or Ethyl Alcohol. Other solvents (eg. water) may damage the LCD. 6. When mounting the LCD module, make sure that it is free form twisting, warping and distortion. 7. Ensure to provide enough space (with cushion) between case and LCD panel to prevent external force adding on it, or it may cause damage to the LCD or degrade the display result. 8. Only hold the LCD module by its side. Never hold LCD module by add force on the heat seal or TAB. 9. Never add force to component of the LCD module. It may cause invisible damage or degrade of the reliability. 10. LCD module could be easily damaged by static electricity. Be careful to maintain an optimum anti-static work environment to protect the LCD module. 11. When peeling off the protective film from LCD, static charge may cause abnormal display pattern. It is normal and will resume to normal in a short while. 12. Take care and prevent get hurt by the LCD panel sharp edge. 13. Never operate the LCD module exceed the absolute maximum ratings. 14. Keep the signal line as short as possible to prevent noisy signal applying to LCD module. 15. Never apply signal to the LCD module without power supply. 16. IC chip (eg. TAB or COG) is sensitive to the light. Strong lighting environment could possibly cause malfunction. Light sealing structure casing is recommend. 17. LCD module reliability may be reduced by temperature shock. 18. When storing the LCD module, avoid exposure to the direct sunlight, high humidity, high temperature or low temperature. They may damage or degrade the LCD module