LM24064AFW TOPWAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 1 of 10 LM24064AFW LCD Module User Manual Prepared by: Dong Checked by: Approved by: Date: 2014-03-05 Date: Date: Rev. Descriptions Release Date
0.1 Preliminary release 2014-03-05
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 2 of 10 Table of Content
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 3 of 10 1. Basic Specifications
1.1 Display Specifications
1) LCD Display Mode : STN, Negative, Transmissive 2) Display Color : Display Data = “1” : Light Gray (*1) : Display Data = “0” : Deep Blue (*2) 3) Viewing Angle : 6 H 4) Driving Method : 1/64 duty, 1/9bias 5) Backlight : White LED backlight Note: *1. Color tone may slightly change by Temperature and Driving Condition. *2. The Color is defined as the inactive / background color *3. Fine Contrast adjustment function is necessary in the application design for optimal display result
1.2 Mechanical Specifications
1) Outline Dimension : 180.0 x 62.0 x 12.3MAX see attached Outline Drawing for details
1.3 Block Diagram
C/D, /RD, /WR LCD Panel 240 x 64 pixels DB0 - DB7 /CE, /RST, FS1 COMMON Driver VEE,FG Power and Booster Circuit LED Backlight Circuit T6963C or equivalent 32k x 8bit SRAM SEGMENT Driver SEGMENT Driver SEGMENT Driver VSS VDD
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 4 of 10
1.4 Terminal Functions
No. Pin Name I/O Descriptions
1 FG Power Frame Ground, Connected to VSS
2 VSS Power 0V Power Supply, GND
3 VDD Power Positive Power Supply
4 NC - No Connection, Leave Open
5 /WR Input Data or Command Write Signal 6 /RD Input Data or Status Read Signal 7 /CE Input Chip Enable Signal
8 C/D Input Address for Data or Command:
C/D=H, /WR=L, /RD=H : Command Write C/D=H, /WR=H, /RD=L : Status Read C/D=L, /WR=L, /RD=H : Data Write C/D=L, /WR=H, /RD=L : Data Read
9 NC - No Connection, Leave Open
10 /RST Input Reset Signal: /RST = L, Reset the LCD Module /RST = H, Normal Running
11 DB0
: :
18 DB7
19 FS1 Input Font Selection Input:
FS1=H : 6x8 font FS1=L : 8x8 font
20 VEE Input Power Booster Input
21 NC - No Connection, Leave Open
22 NC - No Connection, Leave Open
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 5 of 10 2. Absolute Maximum Ratings Items Symbol Min. Max. Unit Condition Supply Voltage V DD 0 +7.0 V VSS = 0V Input Voltage V IN V SS-0.3 V DD+0.3 V VSS = 0V Operating Temperature T OP -20 +70 C No Condensation Storage Temperature T ST -30 +80 C No Condensation Cautions: Any Stresses exceeding the Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. 3. Electrical Characteristics
3.1 DC Characteristics
VSS=0V, VDD =5.0V, TOP =25C Items Symbol MIN. TYP. MAX. Unit Applicable Pin Operating Voltage V DD 4.5 5.0 5.5 V VDD Input High Voltage V IN 0.6xVDD - VDD V DB0~DB8, /WR, /RD, /CE, C/D, /RST, FS1 Input Low Voltage V IN 0 - 0.6 V DB0~DB8, /WR, /RD, /CE, C/D, /RST, FS1 Operating Current I DD - 13.6 34 mA VDD (Exclude Backlight Current) VEE Voltage(*1) V DD-VEE 12.3 12.6 12.9 V VEE&VDD (*1 ) Best contrast could be found in Range.
3.2 LED Backlight Circuit Characteristics
VSS=0V, VDD=5.0V, TOP =25C Items Symbol MIN. TYP. MAX. Unit Applicable Pin Forward Voltage VDD - 5.0 - V VDD Forward Current I VDD - 136 160 mA VDD(Exclude Operating Current) Cautions: Exceeding the recommended driving current could cause substantial damage to the backlight and shorten its lifetime. VSS VDD No. of LED = 8pcs
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 6 of 10
3.3 AC Characteristics
VSS=0V, VDD=5.0V, TOP=25C Item Symbol MIN. TYP. MAX. Unit C/D Setup Time tcds 130 - - ns C/D Hold Time tcdh 13 - - ns /CE,/RD,/WR Pulse Width tce, trd, twr 104 - - ns Data Setup Time tds 104 - - ns Data Hold Time tdh 52 - - ns Access Time tacc - - 105 ns Output Hold Time toh 13 - 65 ns Note: *1. Input signal rise/fall time should be less than 20ns Bus Timing Diagram
3.3.1 Reset Timing
V SS=0V, VDD=5.0V, TOP=25C Item Symbol MIN. TYP. MAX. Unit Reset Time tr - - 100 μs Reset LOW pulse width trw 100 - - μs Reset Timing Diagram
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 7 of 10 4. Function Specifications
4.1 Resetting the LCD module
The LCD module should be initialized by using /RST terminal. While turning on the VDD and VSS power supply, maintain /RST terminal at LOW level. After the power supply stabilized, release the reset terminal (/RST=HIGH)
4.2 Adjusting the LCD display contrast
A Power must be connected to the LCD module for providing a reference to VEE. Adjusting the voltage will result the change of LCD display contrast.
4.3 Display Memory Mapping Parameter
Example: Home Address Area Text Layer 0000(hex) 001E(hex) Graphics Layer 0800(hex) 001E(hex) Note: *1. For the details of the commands and T6963C operation please refer to T6963C Data sheet. Power Supply LCD module VEE VSS VDD LCD Power Supply
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 8 of 10
4.4 Commands Table
/WR /RD C/D Code (8bit) Note
010 X Address
010 Y Address
010 DATA
010 Low Address
010 High Address
010 Columns
Text Attribute mode 0 1 1 1000 x100 Internal CG ROM mode 0 1 1 1000 0xxx Mode Set External CG RAM mode 0 1 1 1000 1xxx Display off 0 1 1 1001 0000 Cursor on, Blink off 0 1 1 1001 xx10 Cursor on, Blink on 0 1 1 1001 xx11 Text on, Graphic off 0 1 1 1001 01xx Text off, Graphic on 0 1 1 1001 10xx Display Mode Text on, Graphic on 0 1 1 1001 11xx D3: Graphic Display on D2: Text Display on D1: Cursor Display on D0: Cursor Blink on 1-line cursor 0 1 1 1010 0000 2-line cursor 0 1 1 1010 0001 3-line cursor 0 1 1 1010 0010 4-line cursor 0 1 1 1010 0011 5-line cursor 0 1 1 1010 0100 6-line cursor 0 1 1 1010 0101 7-line cursor 0 1 1 1010 0110 Cursor Pattern Select 8-line cursor 0 1 1 1010 0111 Set Data Auto Write 0 1 1 1011 0000 Set Data Auto Read 0 1 1 1011 0001 Data Auto Read/Write Auto Reset 0 1 1 1011 0010
010 Data Data Write Increment ADP
0 1 1 1100 0001 Data Read Increment ADP
100 Data
010 Data Data Write Decrement ADP
0 1 1 1100 0011 Data Read Decrement ADP
010 Data Data Write Non-variable ADP
Data Read Non-variable ADP
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 9 of 10 Commands Table (continue) Command /WR /RD C/D Code (8bit) Note Screen Peek 0 1 1 1110 0000 Not use Screen Peek/Copy Screen Copy 0 1 1 1110 1000 Not use Bit Reset 0 1 1 1111 0xxx Bit Set 0 1 1 1111 1xxx Bit 0 (LSB) 0 1 1 1111 x000 Bit 1 0 1 1 1111 x001 Bit 2 0 1 1 1111 x010 Bit 3 0 1 1 1111 x011 Bit 4 0 1 1 1111 x100 Bit 5 0 1 1 1111 x101 Bit 6 0 1 1 1111 x110 Bit Set/Reset Bit 7 (MSB) 0 1 1 1111 x111 D3: Set/Clear bit D2,D1,D0: bit no. Status Check Check the status 1 0 1 Status D0: Command execution ready D1: Data read/write ready D2: Auto mode data read ready D3: Auto mode data write ready D4: not used D5: Controller operation normal D6: Error Flag D7: Normal display Note: *1. When sending commands or data, Status Check must be performed. Otherwise, T6963C cannot operate normally, even after a delay time. *2. For the details of the commands and T6963C operation please refer to T6963C Data sheet.
4.5.1 Power off the LCD Module
It recommends that enter Display off before power off the LCD module.
4.5.2 Refreshing The LCD Module
It recommends that the operating modes and display contents be refreshed periodically to prevent the effect of unexpected noise.
TOPWAY LCD Module User Manual LM24064AFW URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM24064AFW-Manual-Rev0.1.DOC Page: 10 of 10 5. Design and Handling Precaution 1. The LCD panel is made by glass. Any mechanical shock (eg. dropping form high place) will damage the LCD module. 2. Do not add excessive force on the surface of the display, which may cause the Display color change abnormally. 3. The polarizer on the LCD is easily get scratched. If possible, do not remove the LCD protective film until the last step of installation. 4. Never attempt to disassemble or rework the LCD module. 5. Only Clean the LCD with Isopropyl Alcohol or Ethyl Alcohol. Other solvents (eg. water) may damage the LCD. 6. When mounting the LCD module, make sure that it is free form twisting, warping and distortion. 7. Ensure to provide enough space (with cushion) between case and LCD panel to prevent external force adding on it, or it may cause damage to the LCD or degrade the display result. 8. Only hold the LCD module by its side. Never hold LCD module by add force on the heat seal or TAB. 9. Never add force to component of the LCD module. It may cause invisible damage or degrade of the reliability. 10. LCD module could be easily damaged by static electricity. Be careful to maintain an optimum anti-static work environment to protect the LCD module. 11. When peeling off the protective film from LCD, static charge may cause abnormal display pattern. It is normal and will resume to normal in a short while. 12. Take care and prevent get hurt by the LCD panel sharp edge. 13. Never operate the LCD module exceed the absolute maximum ratings. 14. Keep the signal line as short as possible to prevent noisy signal applying to LCD module. 15. Never apply signal to the LCD module without power supply. 16. IC chip (eg. TAB or COG) is sensitive to the light. Strong lighting environment could possibly cause malfunction. Light sealing structure casing is recommend. 17. LCD module reliability may be reduced by temperature shock. 18. When storing the LCD module, avoid exposure to the direct sunlight, high humidity, high temperature or low temperature. They may damage or degrade the LCD module