LM2429 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Absolute Maximum Ratings(Notes 1, If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (V CC) +200V Bias Voltage (VBB) +15V Input Voltage (VIN) -0.5V to V BB +0.5V Storage Temperature Range (TSTG) −65˚C to +150˚C Lead Temperature (Soldering, <10 sec.) 300˚C ESD Tolerance, Human Body Model 2kV Machine Model 200V Junction Temperature 150˚C θ JC (typ) 2.9˚C/W Operating Ranges(Note 2) VCC +130V to +180V VBB +7V to +13V VIN +0V to +4V VOUT +15V to +175V Case Temperature Refer to Figure 11 Do not operate the part without a heat sink.

Electrical Characteristics

(See Figure 3for Test Circuit) Unless otherwise noted: V CC = +180V, VBB = +8V, CL = 8pF, TC = 50˚C. DC Tests: VIN = 2.5VDC. AC Tests: Output = 130V PP (35V - 165V) at 1MHz. Symbol Parameter Conditions LM2429 UnitsMin Typical Max ICC Supply Current All Three Channels, No Input Signal, No Output Load 16 30 mA IBB Bias Current All Three Channels 12 17 mA VOUT, 1 DC Output Voltage No AC Input Signal, V IN = 2.5VDC 100 105 110 V DC VOUT, 2 DC Output Voltage No AC Input Signal, V IN = 1.2VDC 163 168 173 V DC AV DC Voltage Gain No AC Input Signal -48 -51 -54 ∆AV Gain Matching (Note 4), No AC Input Signal 1.0 dB LE Linearity Error (Notes 4, 5), No AC Input Signal 8 % t R Rise Time (Note 6), 10% to 90% 26 ns tF Fall Time (Note 6), 90% to 10% 30 ns OS Overshoot (Note 6) 5 % Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Note 2: Operating ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. Datasheet min/max specification limits are guaranteed by design, test, or statistical analy sis. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may change when the device is not operated under the list ed test conditions. Note 3: All voltages are measured with respect to GND, unless otherwise specified. Note 4: Calculated value from Voltage Gain test on each channel. Note 5: Linearity Error is the variation in DC gain from V IN = 1.1V to V IN = 3.8V. Note 6: Input from signal generator: t r,t f < 1 ns. LM2429 www.national.com 2

TABLE 1. Power Dissipation for Various Video Patterns Note: Input from signal generator: t r,t f < 2 ns. package with thin leads for improved metal-to-metal spacing. over distortion at low signal levels. is ac coupled to the base of Q5. The LM2429 performance is targeted for the HDTV market.

FIGURE 14. LM126X/LM242X/LM248X Demonstration Board Schematic

FIGURE 15. LM126X/LM242X/LM248X Demonstration Board Schematic (continued)

Physical Dimensions inches (millimeters) unless otherwise noted CONTROLLING DIMENSION IS INCH VALUES IN [ ] ARE MILLIMETERS Order Number LM2429 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 www.national.com LM2429 Monolithic Triple Channel 15 MHz DTV Driver