DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
PixArt Imaging Inc. PMW3360 Product Datasheet Optical Gaming Navigation Sensor Version 1.30 |6 April 2016 PixArt Imaging Inc. All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission. PMW3360DM-T2QU: Optical Gaming Navigation Sensor General Description PMW3360DM-T2QU is PixArt Imaging's high end gaming sensor which comprises of navigation sensor and I R LED integrated in a 16pin molded lead-frame DIP package. It provides best in class gaming experience with the enhanced features of high speed, high resolution, high accuracy and selectable lift detection height to fulfill professional gamers’ need. The sensor comes with self -adjusting variable frame rate algorithm to enable wireless gaming application. It is designed to be used with LM19-LSI lens to achieve optimum performance. Key Features Integrated 16 pin molded lead-frame DIP package with IR LED Operating Voltage: 1.8V - 2.1V Lift detection options Manual lift cut off calibration 2mm 3mm High speed motion detection 250ips (typical) and acceleration 50g (max). Selectable resolutions up to 12000cpi with 100cpi step size Resolution error of 1% (typical) Four wire serial port interface (SPI) External interrupt output for motion detection Internal oscillator — no clock input needed Self-adjusting variable frame rate for optimum power performance in wireless application Customizable response time and downshift time for rest modes Enhanced programmability Angle snapping Angle tunability
Applications
Wired and Wireless Optical gaming mice Integrated input devices Battery-powered input devices Key Sensor Parameters Parameter Value Power supply Range 1.8V - 2.1V Optical Lens 1:1 Interface 4 wire Serial Port Interface (SPI) System Clock 70MHz Frame Rate Up to 12000 fps Speed 250ips (typical) Resolution 12000 cpi Package Type 16 pin molded lead-frame DIP package with integrated IR LED
Ordering Information
PixArt Imaging Inc. PMW3360 Product Datasheet Optical Gaming Navigation Sensor Version 1.30 |6 April 2016 PixArt Imaging Inc. All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
Contents
1.0 System Level Description
This section covers PMW3360’s guidelines and recommendations in term of sensor, lens & PCB assemblies.
1.1 Pin Configuration
Figure 1. Device output pins Table 1. PMW3360DM-T2QU Pin Description
1 NA NC NC (Float)
2 NA NC NC (Float)
3 Supply Voltage
4 VDD Power Input power supply
5 VDDIO Power I/O reference voltage
6 NA NC NC (Float)
7 Reset control NRESET Input Chip reset(active low)
8 Ground GND GND Ground
9 Motion Output MOTION Output Motion detect
11 MOSI Input Serial data input
12 MISO Output Serial data output
13 NCS Input Chip select(active low)
14 NA NC NC (Float)
15 LED LED_P Input LED Anode
16 NA NC NC (Float)
1.2 Package Outline Drawing
Figure 2. Packages Outline Drawing degradation which may be induced by ESD.
1.3 Assembly Drawings
Figure 3. Recommended sensor orientation, mechanical cutouts and spacing (Top View)
Figure 4. Assembly drawing of PMW3360DM-T2QU and distance from lens reference plane to tracking surface (Z)
Figure 5. Exploded View of Assembly
Figure 6. Lens Outline Drawing
Figure 7. Cross section view of lens assembly
Figure 8. Recommended Base Plate Opening Note: Mouse feet should be placed close to the opening to stabilize the surface within the FOV of the sensor.
1.4 PCB Assembly Recommendation
1) Insert the integrated sensor and all other electrical components into PCB. protect the sensor from flux spray and wave solder. 4) Place the lens onto the base plate. Care must be taken to avoid contamination on the optical surfaces. assembly process. Hold the PCB vertically when removing kapton tape. self-align to the lens via the guide posts. The optical position reference for the PCB is set by the base plate and lens. Note that the PCB motion due to button presses must be minimized to maintain optical alignment. the sensor with heat staking process. Please refer to the application note PMS0122-LM19-LSI-AN for more details. components are stacked or interlocked to the correct vertical height. Figure 9. Block diagram of PMW3360DM-T2QU
1.5 Reference Schematics
Figure 10. Schematic diagram for interface between PMW3360DM-T2QU and microcontroller on a wired solution
Figure 11. Schematic diagram for interface between PMW3360DM-T2QU and microcontroller on a wireless solution
PixArt Imaging Inc. PMW3360 Product Datasheet Optical Gaming Navigation Sensor Version 1.30 | 6 April 2016 PixArt Imaging Inc. http://www.pixart.com All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
2.0 Electrical Specifications
- Passes FCC “ Part15, Subpart B, Class B”, “CISPR 22 1997 ClassB” and worldwide analogous emission limits when assembled into a mouse with shielded cable and following PixArt Imaging’s recommendations.
- Passes IEC 62471: 2006 Photo biological safety of lamps and lamp systems
2.1 Absolute Maximum Ratings
Table 2: Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Notes Storage Temperature TS -40 85 °C Lead Solder Temperature TSOLDER 260 °C For 7 seconds, 1.6mm below seating plane. Supply Voltage VDD VDDIO -0.5 1.80 2.10 3.60 V V VDDIO -0.5 3.60 V ESD (Human Body Model) 2 kV All pins Input Voltage VIN -0.5 3.6 V All I/O pins.
2.2 Recommended Operating Conditions
Table 3: Recommended Operating Condition Parameter Symbol Min Typ. Max Units Notes Operating Temperature TA 0 40 °C Power Supply Voltage VDD 1.80 1.90 2.10 V excluding supply noise VDDIO 1.80 1.90 3.60 V excluding supply noise. (VDDIO must be same or greater than VDD) Power Supply Rise Time tRT 0.15 20 ms 0 to VDD min Supply Noise (Sinusoidal) VNA 100 mVp-p 10 kHz —75 MHz Serial Port Clock Frequency fSCLK 2.0 MHz 50% duty cycle Distance from Lens Reference Plane to Tracking Surface Z 2.2 2.4 2.6 mm Speed S 250 ips 300ips on QCK, Vespula Speed, Vespula Control and FUNC 1030 surfaces Resolution error ResErr 1 % Up to 200ips on QCK with 5000 cpi Acceleration A 50 g In run mode
All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
2.3 AC Electrical Specifications
Table 4. AC Electrical Specifications Electrical characteristics over recommended operating conditions. Typical values at 25 °C, VDD = 1.9 V, VDDIO = 1.9V. address byte of the next command.
All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
2.4 DC Electrical Specifications
Table 5. DC Electrical Specifications 12mA, 70MHz (internal), and 1.1kHz (slow clock).
PixArt Imaging Inc. PMW3360 Product Datasheet Optical Gaming Navigation Sensor Version 1.30 | 6 April 2016 PixArt Imaging Inc. http://www.pixart.com All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
3.0 Registers Table
PMW3360DM-T2QU registers are accessible via the serial port. The registers are used to read motion data and status as well as to set the device configuration. Note: (R = Read / W = Write or Read/Write= RW) Address Register Access Default Value 0x00 Product_ID R 0x42 0x01 Revision_ID R 0x01 0x02 Motion RW 0x20 0x03 Delta_X_L R 0x00 0x04 Delta_X_H R 0x00 0x05 Delta_Y_L R 0x00 0x06 Delta_Y_H R 0x00 0x07 SQUAL R 0x00 0x08 Pixel_Sum R 0x00 0x09 Maximum_Pixel R 0x00 0x0A Minimum_Pixel R 0x00 0x0B Shutter_Lower R 0x12 0x0C Shutter_Upper R 0x00 0x0D Control RW 0x02 0x0F Config1 RW 0x31 0x10 Config2 RW 0x20 0x11 Angle_Tune RW 0x00 0x12 Frame_Capture RW 0x00 0x13 SROM_Enable W N/A 0x14 Run_Downshift RW 0x32 0x15 Rest1_Rate_Lower RW 0x00 0x16 Rest1_Rate_Upper RW 0x00 0x17 Rest1_Downshift RW 0x1F 0x18 Rest2_Rate_Lower RW 0x63 0x19 Rest2_Rate_Upper RW 0x00 0x1A Rest2_Downshift RW 0xBC 0x1B Rest3_Rate_Lower RW 0xF3 0x1C Rest3_Rate_Upper RW 0x01 0x24 Observation RW 0x00 0x25 Data_Out_Lower R 0x00 0x26 Data_Out_Upper R 0x00 0x29 Pixel_Dump RW 0x00 0x2A SROM_ID R 0x00 0x2B Min_SQ_Run RW 0x10 0x2C Pixel_Threshold RW 0x0A 0x2F Config5 RW 0x31 0x3A Power_Up_Reset W N/A 0x3B Shutdown W N/A 0x3F Inverse_Product_ID R 0xBD 0x41 LiftCutoff_Tune3 RW 0x00 0x42 Angle_Snap RW 0x00 0x4A LiftCutoff_Tune1 RW 0x00 0x50 Motion_Burst RW 0x00 0x58 LiftCutoff_Tune_Timeout RW 0x27 0x5A LiftCutoff_Tune_Min_Length RW 0x09 0x62 SROM_Load_Burst W N/A 0x63 Lift_Config RW 0x02 0x64 Pixel_Burst R 0x00 0x65 LiftCutoff_Tune2 R 0x00