EDS1297-003 EUROPA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com EDS1297-003Page 1 of 2 Features• Compact and reliable

  • IP66
  • Easy Installation
  • Wiping contacts
  • Excellent switching and high short circuit capacity LBDC164P|LBDC254P|LBDC324P IP66 Enclosed Switch Disconnectors

Applications

  • Photovoltaic - Isolators
  • Inverter Applications
  • DC Solar Pumps DC Isolators Rating Table Type Configuration IEC Rating 60947-3- DC21B & DC PV2 500V 700V 1000V 1500V LBDC164P

2 Poles in series 16 16 - -

2 Poles in series

+ 2 Parallel 55 25 12 3

4 Poles in series 25 25 25 20

2 Poles in series 20 20 - -

+ 2 Parallel 63 32 16 4

4 Poles in series 32 32 32 25

2 Poles in series 25 25 - -

+ 2 Parallel 72 35 20 6

4 Poles in series 40 40 40 32

Switching Configurations - Examples

  • Degree of Protection: IP66
  • Switch rear mounted for easy connection
  • Enclosure colour: Dark grey base and light grey cover.
  • Switch mounted in ABS enclosure.
  • Round padlocking device (Max.3 padlocks) to prevent the Switch from being made ON by unauthorised personnel
  • Interlock Feature (Cover opens only in OFF position) Terminal Cross Section Measure LBDC164P LBDC254P LBDC324P Single / Multi Strand Wire Min mm² 2.5 2.5 2.5 Max mm² 10 10 16 Fine Strand Wire with Sleeve Min mm² 0.75 0.75 2.5 Max mm² 6 6 10 Recommended Tightening Torque for Terminals - Nm 1.7 1.7 2 Data SheetEUR PA Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Maintenance Operator Handle for testing: EDS1297-003Page 2 of 2