EDS1054-002 EUROPA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Technical Data: LBCD1603PSN AC-23@400V(415V) Door Interlocked Changeover Switches R KEMA Certified R EN 60947-1 & 3 Compliant R IP65 Data Range Units LBCD1603PSN Rated thermal current Ith at 40°C Amps A 160 Rated insulation voltage Ui Volts V 1000 Rated dielectric strength Volts kV 4 Rated impulse voltage Uimp Volts kV 8 Rated operational current Ie at 400V AC-22 Amps A 160 Rated operational current Ie at 400V AC-23 Amps A 160 Rated operational power Pe at 400V AC-23 Watts kW 89 Rated breaking capacity Amps A 1280 Rated making capacity Amps A 1600 Rated short circuit making capacity (peak value) I cm Amps kA 13 Rated short-time withstand current (1 sec) rms I cw Amps kA 7 Minimum number of mechanical operations - Cycles 10,000 Minimum number of electrical operations @ 400V AC-22 - Cycles 1,000 Terminal Capacity (rigid copper cable) - mm² 95 Lug bolt size - - M10 Maximum size of busbar connection - mm 5x30 Tightening torque - Nm 13 Important Safety Notice It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should be checked periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Important

Technical Data: LBCD1603PSN AC-23@400V(415V) Door Interlocked Changeover Switches 135N 246N LBF 3 Pole + Switched Neutral 135 246 LBF 3 Pole 135N 246N LB 3 Pole + Switched Neutral 135 246 LB 3 Pole 135N 246N LBC 3 Pole + Switched Neutral 135N 246N I II A B O OT 3P 4P 3P 4P 181 192 53 64 10 M8 Dimensions (mm) Panel Handle Drilling Dimensions

Technical Data: LBCD1603PSN AC-23@400V(415V) Door Interlocked Changeover Switches Padlock Operation: Door Interlock Defeat Mechanism (For Authorised Personnel Only): WARNING! ACCESS TO LIVE PARTS . Ensure that the door is closed and the handle is in the on position . Locate the hole on the right side of the handle, then push and hold a small pin into the hole to activate the defeat mechanism . The door can now be opened in the on position. Remove pin and close the door to reset the mechanism Handle Assembly: 1. Ensure that the handle is in the off position and locate the handle on to the door with the handle showing the off position at 12 o’clock 2. Tighten the four M5 flange nuts to 1.5Nm Shaft Assembly: 3. Ensure that the switch is in the off position and fully insert the shaft into the switch with the cross pin in a vertical position 4· Tighten the M5 shaft grub screw to 1.2Nm using a 2.5mm A/F allen key Press hereLift here Press here 1. 2. 3. 4.

Technical Data: Handles, Shafts and Extended Shafts for Enclosed and Door Interlocked Changeover Switches Product Prefix Blue & White Handle Red & Yellow Handle Shaft Section (mm) L (mm) P (mm) S (mm) D (mm) Standard Handle and Shafts LBC160/LBCD160 LBPHBW060 Not Available □7 177 163-250 94 60LBC200/LBCD200 LBC250/LBCD250 LBC315/LBCD315 LBPHBW070 □10 227 166-293 143 LBC400/LBCD400 LBC630/LBCD630 LBPHBW080 □14 195 195-272 176 LBC800/LBCD800 LBC1000/LBCD1000 LBPHBW110 186 223-298 396 Extended Shafts Product Prefix Extended Shaft Type 1 Shaft Section (mm) L (mm) P (mm) Extended Shaft Type 2 L (mm) P (mm) LBCD160 LBES010 □7 250 163-323 LBES020 387 163-460LBCD200 LBCD250 LBCD315 LBES030 □10 376 166-442 LBES040 536 166-602 LBCD400 LBCD630 LBES050 □14 345 195-422 LBES060 535 195-612 LBCD800 LBCD1000 223-457 223-647 Europa House, Airport Way, Luton, Beds, LU2 9NH Tel: 01582 692 440 / Fax: 01582 692 450 e-mail: sales@europacomponents.com / website: http://www.europacomponents.com