EDS1021-003 EUROPA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1021-003 Page 1 of 2 EUR PA LB25, 32, 404PBB/PSNBB / LB63, 803P/PSN / LB63, 804P AC-21 Enclosed Switch Disconnectors (Boxed Isolators) Data Range Units LB254PBB LB253PSNBB LB324PBB LB323PSNBB LB404PBB LB403PSNBB LB633P LB634P LB633PSN LB803P LB804P LB803PSN Rated Operational Voltage Ue IEC & EN Volts V 690 690 690 690 690 UL Volts V 600 600 600 600 600 Main Switch: Isolating Voltage up to Volts V 750 750 750 750 750 Rated Impulse Withstand Voltage Uimp Volts kV 6 6 6 6 6 Rated Uninterrupted Current Iu Amps A 20 25 32 40 63 Rated Operational Current Ie IEC & EN AC-22A Up to 690V A 20 25 32 40 63 AC-21A Up to 690V A 25 32 40 63 80 AC-1 Up to 690V A 25 32 40 63 80 Rated Operational Power AC-23A (50-60Hz) IEC & EN 3 Phase 220-240V kW 7.5 11 15 22 30 380 - 440V kW 11 15 18.5 30 27 500 - 690V kW 15 22 22 45 45 Rated Operational Power AC-3 (50-60Hz) IEC & EN 3 Phase 220-240V kW 5.5 7.5 11 15 22 440V kW 7.5 11 11 18.5 22 690V kW 11 15 15 30 30 UL Power Rating DOL

3 Phase

120V hp 1.5 3 3 5 7.5 240V hp 3 7.5 7.5 10 15 480V hp 7.5 15 20 20 25 600V hp 10 20 25 30 30

1 Phase

120V hp 0.5 1.5 2 3 3 240V hp 1.5 2 3 5 7.5 UL Short Circuit Ratings Fuse rating, class J Amps A - 45 45 70 70 Fuse rating, class RK5 Amps A 20 - - - - Rated Fused short circuit current Amps kA 10 10 10 10 10 Short Circuit Capacity (IEC) Max Fuse Size (Type gL) Amps A 20 32 32 63 63 Rated Fused Short Circuit Current Amps kA 5 30 30 30 30 Terminal Specification Single/ Multiple Strand Wire Max-mm2 10 10 10 16 16 Fine Strand with Sleeve Max-mm2 6 6 6 10 10 American Wire Gauge AWG 10 10 10 6 6 IEC & EN 60947-1 and 3

Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1021-003 Page 2 of 2 EUR PA LB25, 32, 404PBB/PSNBB / LB63, 803P/PSN / LB63, 804P AC-21 Enclosed Switch Disconnectors (Boxed Isolators) Procedure to dismantle the cover:

  • Ensure the switch is in the OFF position
  • Unscrew the cover screws & remove the cover
  • For easy wiring, the switch can be removed from the base & then clicked back into place once wiring is complete
  • After wiring ensure the profile orientation of the actuating spindle & knob shaft are in the same position
  • Replace the cover & take care not to overtighten the screws (recommended tightening torque 0.5Nm)
  • Do not install using power driven screwdrivers Please Note : There is no need to remove the switch handle in order to remove the cover Mounting Details Terminal Configuration Dismantling the Cover