EDS1162-002 EUROPA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1162-002 Page 1 of 2 EUR PA Data Range Units LB2003PNLGP LB2003PSNGP LB2503PNLGP LB2503PSNGP Rated thermal current Ith at 50°C Amps A 200 250 Rated insulation voltage Ui Volts V 1000 1000 Rated dielectric strength Volts kV 4 5 Rated impulse voltage Uimp Volts kV 8 8 Rated operational current Ie at 400V AC-22 Amps A 200 250 Rated operational current Ie at 400V AC-23 Amps A 160 160 Rated operational power Pe at 400V AC-23 Watts kW 89 89 Rated breaking capacity Amps A 1280 1280 Rated making capacity Amps A 1600 1600 Rated short circuit making capacity (peak value) Icm Amps kA 13 13 Rated short-time withstand current (1 sec) rms Icw Amps kA 7 7 Minimum number of mechanical operations - Cycles 30.000 30.000 Minimum number of electrical operations @ 400V AC-23 - Cycles 1.000 1.000 Terminal Capacity (rigid copper cable) - mm² 120 120 Lug bolt size - - M10 M10 Maximum size of busbar connection - mm 5x30 5x30 Tightening torque - Nm 13 13
- Bureau Vertitas
- EN 60947- 1 & 3 Compliant
- IP66 LB200-2503PNLGP/PSNGP AC-22@400V(415V) Enclosed Door Interlocked Load Break Switches
Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1162-002 Page 2 of 2 EUR PA Enclosure Dimensions Terminal Configuration Note: Neutral contact is Early Make/ Late break LB200-2503PNLGP/PSNGP AC-22@400V(415V) Enclosed Door Interlocked Load Break Switches Enclosure Specification: Glass Fibre Reinforced Polycarbonate IP66 / IK10 + 35⁰C / IK09 -25⁰C Glow Wire Flammability Rating 960⁰C Halogen Free / UV Resistent to UL508 Colour: Ral:7035