EDS1006-004 EUROPA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1006-004 Page 1 of 2 EUR PA Switch Disconnectors - 6 Pole, 8 Pole & Change Over Data Range Units LB636P LB638P LBC634P LB806P LB808P LBC804P LB1256P LB1258P LBC1254P Rated Operational Voltage Ue IEC & EN 60947-3 Volts V 690 690 690 Main Switch: Isolating Voltage up to Volts V 750 750 750 Rated Impulse Withstand Voltage Uimp Volts kV 6 6 6 Rated Uninterrupted Current Iu Amps A 63 80 125 Rated Operational Current Ie IEC & EN 60947-3 AC-22A Up to 690V A 63 80 125 AC-21A Up to 690V A 80 80 125 AC-1 Up to 690V A 80 80 125 Rated Operational Power AC-23A (50-60Hz) IEC & EN 60947-3 3 Phase 220-240V kW 30 37 55 280-440V kW 37 45 75 500-690V kW 45 90 90 Rated Operational Power AC-3A (50-60Hz) IEC & EN 60947-3 3 Phase 220-240V kW 22 30 45 440V kW 22 37 55 690V kW 30 55 55 UL Power Rating DOL

3 Phase

120V hp 7.5 7.5 7.5 240V hp 15 20 30 480V hp 25 30 40 600V hp 30 40 50

1 Phase

240V hp 7.5 7.5 7.5 UL Short Circuit Ratings Fuse rating, class J Amps A 70 125 125 Fuse rating, class RK5 Amps A - - - Rated Fused short circuit current Amps kA 10 10 10 Short Circuit Capacity (IEC) Max Fuse Size (Type gL) Amps A 63 125 125 Rated Fused Short Circuit Current Amps kA 30 30 30 Terminal Specification Single/ Multiple Strand Wire Min-mm2 2.5 2.5 2.5 Max-mm2 25 50 50 Fine Strand with Sleeve Min-mm2 2.5 4 4 Max-mm2 10 50 50 Recommended Tightening Torque Nm 2.0 2.5 2.5

Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1006-004 Page 2 of 2 EUR PA Note: Change Over Switch is break before make. 3 position, centre Off. When mounted outside, maintenance is required to preserve the enclosure’s painted finish. Change over 4 Pole (‘0’ position shown) Change over 4 Pole Switch Program Dimensions IP65 Epoxy Coated Steel Enclosure Terminal Configuration