L7810_09 HAMAMATSU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
L7810, L7810-02 (Xenon Lamp) L7820, L7820-02 (Deuterium Lamp) LIGHT SOURCE Easy to reproduce highly stable light!! Left: Lamp Housing Right: Power Supply Left: Lamp Housing Right: Power Supply L7810, L7810-02 L7820, L7820-02 These light sources deliver the extremely high levels of "stability" and "repeatability" essential to calibrated light sources. These are availa- ble as an optimal set including a lamp, lamp housing and power sup- ply, so that anyone can easily reproduce a highly stable light output. The L7810-02 xenon lamp light source is calibrated over a wide spec- tral range from 200 nm to 800 nm, while the L7820-02 deuterium lamp light source is calibrated in the UV range from 200 nm to 400 nm. Since we are certified as an ASNITE-Calibration laboratory, we are capable of calibrating spectral irradiance over a wide range from 200 nm to 800 nm (L7810-02). The spectral range at wavelengths shorter than 250 nm is calibrated based on the ASNITE calibration system (Accreditation System of Na- tional Institute of Technology and Evaluation), while the spectral range at wavelengths longer than 250 nm is calibrated based on the JCSS (Japan Calibration Service System). As of August 2009, Hamamatsu Photonics is the only company certi- fied as an ASNITE-Calibration laboratory in the "Light" field.
APPLICATIONS
GLight level control of light source GSensitivity control of optical sensor GLight intensity measurement and studies of photoreactions (Light resistance, light curing, etc.) GQuality control of photometric equipment (Medical analysis equipment, semi- conductor inspection systems, imaging devices, etc) TLSOF0151 TLSOF0159 Manufactured upon receiving your order.
COMPARISON OF SPECTRAL IRRADIANCE (Reference Data) LIGHT INTENSITY DRIFT (Typ.) TLSOB0063EB 50 cm away from the light source CONVENTIONAL HALOGEN LAMP CALIBRATED DEUTERIUM LIGHT SOURCE L7820 (250 nm to 400 nm) L7820-02 (200 nm to 400 nm) CALIBRATED XENON LIGHT SOURCE L7810 (250 nm to 800 nm) L7810-02 (200 nm to 800 nm) 200 250 300 350 400 450 500 550 600 650 700 750 800 WAVELENGTH (nm) SPECTRAL IRRADIANCE (µW.cm-2.nm-1) 0.001 0.01 0.1 100 JCSSASNITE calibration HIGH POWER WIDE SPECTRAL RANGE HIGH POWER WIDE SPECTRAL RANGE OPERATING TIME (h) RELATIVE INTENSITY (%) 10 200 110 100 30 40 50 60 70 80 90 100 110 HIGH STABILITY HIGH STABILITY TLSOB0065EB Type No. L7810 L7810-02 L7820 L7820-02 Lamp Input Wattage Spectral Distribution Calibrated Range Type of Calibration Calibration Unit Output Window Material (Lamp Housing) Output Window Diameter Optical Axis Height Warm-up Time Timer Input Voltage (AC) Power Consumption Cooling (Lamp Housing, Power Supply) Ambient Operating Temperature Operating Range During Calibration Dimensions (excluding projecting parts) (W × H × D) Weight Recalibration Interval Guaranteed Lamp Service Life 5 Xenon lamp 150 W 185 nm to 2000 nm 250 nm to 800 nm (10 nm intervals) 28 mm Hour display (power supply) 350 VA 144 mm × 90 mm × 282 mm Approx. 2.9 kg Approx. 3.2 kg Approx. 11 kg 200 nm to 245 nm (5 nm intervals) Spectral irradiance µW·cm-2·nm-1 Synthetic quartz 140 mm (150 mm including plastic feet) 10 minutes or more
100 V to 240 V, 50 Hz / 60 Hz
0 °C to +40 °C +23 °C to +27 °C 20 % to 70 % (no condensation) 100 mm × 280 mm × 100 mm 480 mm × 380 mm × 205 mm 100 hours in operation 500 hours Deuterium lamp 30 W 185 nm to 400 nm 250 nm to 400 nm (10 nm intervals) 25 mm Hour display (lamp housing) 90 VA 117 mm × 90 mm × 200 mm Approx. 2.2 kg Approx. 2.2 kg Approx. 9.5 kg 200 nm to 245 nm (5 nm intervals)ASNITE Calibration JCSS Temperature Humidity Lamp Housing Power Supply Carrying Case Lamp Housing Power Supply Total Weight In spectral regions not covered by the range specified by JCSS, NITE carries out accreditation to make calibration using in- ternational and foreign national standards. The Product Management Dept. of Hama- matsu Photonics K. K. was accredited as an ASNITE calibration company in the "Light" field on May 7, 2004 and is entitled to issue calibration certificates bearing the ASNITE logo mark (ASNITE accreditation symbol). This is the logo mark for the Accredi- tation System of National Institute of Technology and Evaluation (ASN- ITE), an independent administrative agency in Japan. NITE independent- ly implements calibration standards based on international standards. The Product Management Dept. of Hamamatsu Photonics K. K. was accredited as a calibration company in the "Light" field on May 21, 1999, and then became a registered company on Au- gust 4, 2009 according to the legal revisions. And is entitled to issue calibration certificates bearing the JCSS logo mark (JCSS accredita- tion symbol). Those calibration certificates as- sure the traceability to National Measurement Standards and can be used, for example, as a traceability certificate for ISO9000 series. This is the logo mark for the traceability system approved by the Japan Calibration Serv- ice System (JCSS) based on the Measurement Law. NOTE: 1Spectral irradiance is measured at a point 50 cm away from the reference plane of the lamp housing. 2Carrying case specially designed to contain one set of calibrated lamp light source and accessories. 3Total weight including a set of calibration lamp light source and carrying case. 4This is a general guide for recalibration to maintain calibration reliability. Please contact our sales office for recalibration fee. 5This is the total amount of time that the lamp can be recalibrated to serve as a calibrated light source.
DIMENSIONAL OUTLINES (Unit: mm) LAMP HOUSING POWER SUPPLY L7810, L7810-02 (Xenon Lamp) TLSOA0066EC TLSOA0090EB * For cable to connect lamp housing with power supply, length: 2 m LAMP ON TIME COUNTER TIME COUNTER RESET OUTPUT CURRENT POWER INTER LOCK OVER HEAT (A dc) POWER CALIBRATED XENON LIGHT SOURCE OUTPUT 100-240V~350VA 50/60Hz 144 282 CONNECTOR *REAR VIEWSIDE VIEWFRONT VIEW COOLING FAN 100 COOLING FAN OUTPUT WINDOW 140 280 5 100 5 FRONT VIEW BOTTOM VIEW SIDE VIEW CONNECTOR * 4-M4 Plastic feet attached as standard features. These can be removed to use their holes for installation of lamp housing. REFERRENCE SURFACE OF CALIBRATION
OCT. 2009 IP Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2009 Hamamatsu Photonics K.K. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. DIMENSIONAL OUTLINES (Unit: mm) LAMP HOUSING L7820, L7820-02 (Deuterium Lamp) TLSOA0072ED TLSOA0091EB WARRANTY POWER SUPPLY This device is guaranteed for one year after delivery date from us. The warranty extends only to replacement of the products. The warranty dose not cover damage due to misuse of natural calamity. 100 COOLING FAN 140 280 5 100 FRONT VIEW BOTTOM VIEW SIDE VIEW 4-M4 Plastic feet attached as standard features. These can be removed to use their holes for installation of lamp housing. OUTPUT WINDOW CONNECTOR * REFERRENCE SURFACE OF CALIBRATION 200117 FRONT VIEW SIDE VIEW REAR VIEW POWER OUTPUT POWER LAMP CALIBRATED DEUTERIUM LIGHT SOURCE OUTPUT COOLING FAN CONNECTOR * * For cable to connect lamp housing with power supply, length: 1.8 m HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvä gen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it WEB SITE www.hamamatsu.com