L1007B1R0MDWST | DigiCamel IC Datasheet

Online Datasheet

Read L1007B1R0MDWST online.

L0603C5N6SRMST KEMET | Alldatasheet

Document overview

Manufacturer or author: gmabsg1 Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 32

Technical content

Inductors & Ferrite Beads www.kemet.com F3115D 1/08

Small size wound chip inductor with low DC resistance • -ºC to +105ºC (including self-generated heat)
Dimension without directional influence on mountability and characteristics Applications:
Digital Still Cameras (DSC), Digital Video Cameras (DVC), PDA’s and other portable digital equipment
Portable telephones and wireless LAN Inductance Examples: 3N9 = 0.0039μH 1R0 = 1.0μH 10N = 0.01μH 100 = 10μH R10 = 0.1μH 101 = 100 μH Inductance Tolerance K = ±10%, M = ±20% Inductor L C0805 100 M PWS T E T WL Wire Wound Chip Inductors - L-PWS/L-PWF/L-PWI/L-PWR Series Part Numbering Table Dimension Table in millimeters (inches) Case Size (EIA) 0603 1007 0805 1207 0806 EIA Case Code Metric Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 0603 1608 1.6 ±0.1 (0.063 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.35 ±0.2 (0.014 ±0.008) 0805 2012 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 0806 2016 2.0 ±0.2 (0.079 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 1007 2518 2.5 ±0.2 (0.098 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 1207 3218 3.2 ±0.2 (0.128 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 0.6 ±0.2 (0.024 ±0.008) Type PWS = Standard Type PWI = High Current Type PWR = Low Rdc Type PWF = Bottom Surface Electrode (See Part Number Table) Specification C = Commercial B = Bottom Surface Electrode R - Low Rdc Type Packaging Code T = Tape & Reel

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 5 Ordering Code Inductance (μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L0805C1R0MPWST 1.0 ±20% 100 0.15 300 7.96 3,000 L0805C2R2MPWST 2.2 ±20% 80 0.23 240 7.96 3,000 L0805C4R7MPWST 4.7 ±20% 45 0.40 140 7.96 3,000 L0805C100MPWST 10 ±20% 32 0.70 100 2.52 3,000 L0805R100MPWST* 10 ±20% 32 0.50 100 2.52 3,000 L0805C220MPWST 22 ±20% 15 1.70 75 2.52 3,000 L0805C470MPWST 47 ±20% 11 3.70 50 2.52 3,000 L0805C101MPWST 100 ±20% 8 7.00 30 0.796 3,000

0805 Case Size Standard Type (L-PWS Series)

0806 Case Size Standard Type (L-PWS Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L0806C1R0MPWST 1.0 ±20% 100 0.09 455 7.96 2,000 L0806C1R5MPWST 1.5 ±20% 80 0.11 350 7.96 2,000 L0806C2R2MPWST 2.2 ±20% 70 0.13 315 7.96 2,000 L0806C3R3MPWST 3.3 ±20% 55 0.20 280 7.96 2,000 L0806C4R7MPWST 4.7 ±20% 45 0.25 210 7.96 2,000 L0806C6R8MPWST 6.8 ±20% 38 0.35 175 7.96 2,000 L0806C100MPWST 10 ±20% 32 0.50 155 2.52 2,000 L0806C150MPWST 15 ±20% 28 0.70 130 2.52 2,000 L0806C220MPWST 22 ±20% 16 1.00 105 2.52 2,000 L0806C330MPWST 33 ±20% 14 1.70 85 2.52 2,000 L0806C470MPWST 47 ±20% 11 2.40 60 2.52 2,000 L0806C680MPWST 68 ±20% 10 3.00 50 2.52 2,000 L0806C101MPWST 100 ±20% 8 4.50 40 0.796 2,000

1007 Case Size Standard Type (L-PWS Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L1007C1R0MPWST 1.0 ±20% 100 0.06 500 7.96 2,000 L1007C1R5MPWST 1.5 ±20% 80 0.07 400 7.96 2,000 L1007C2R2MPWST 2.2 ±20% 68 0.09 340 7.96 2,000 L1007C3R3MPWST 3.3 ±20% 54 0.11 270 7.96 2,000 L1007C4R7MPWST 4.7 ±20% 46 0.13 240 7.96 2,000 L1007R4R7MPWST 4.7 ±20% 46 0.10 235 7.96 2,000 L1007C6R8MPWST 6.8 ±20% 38 0.15 195 7.96 2,000 L1007C100MPWST 10 ±20% 30 0.25 165 2.52 2,000 L1007C150MPWST 15 ±20% 23 0.32 145 2.52 2,000 L1007C220MPWST 22 ±20% 19 0.50 115 2.52 2,000 L1007C330MPWST 33 ±20% 15 0.70 95 2.52 2,000 L1007C470MPWST 47 ±20% 12 0.95 85 2.52 2,000 L1007C680MPWST 68 ±20% 9.5 1.50 70 2.52 2,000 L1007C101MPWST 100 ±20% 9 2.10 55 0.796 2,000 L1007C151MPWST 150 ±20% 7 3.20 45 0.796 2,000 L1007C221MPWST 220 ±20% 5.5 4.50 35 0.796 2,000 L1007C331MPWST 330 ±20% 4.5 7.00 30 0.796 2,000 L1007C471MPWST 470 ±20% 3.5 10.00 25 0.796 2,000 L1007C681MPWST 680 ±20% 3 17.00 20 0.796 2,000 L1007C102MPWST 1000 ±20% 2.4 24.00 15 0.252 2,000 Wire Wound Chip Inductors - L-PWS, L-PWF, L-PWI, L-PWR Series * Low Rdc type

1207 Case Size Standard Type (L-PWS Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L1207C1R0MPWST 1.0 ±20% 100 0.06 1075 7.96 2,000 L1207C1R5MPWST 1.5 ±20% 80 0.07 860 7.96 2,000 L1207C2R2MPWST 2.2 ±20% 68 0.09 775 7.96 2,000 L1207C3R3MPWST 3.3 ±20% 54 0.11 560 7.96 2,000 L1207C4R7MPWST 4.7 ±20% 41 0.13 550 7.96 2,000 L1207C6R8MPWST 6.8 ±20% 40 0.17 380 7.96 2,000 L1207C100(_)PWST 10 K=±10%, M=±20% 30 0.25 340 2.52 2,000 L1207C150(_)PWST 15 K=±10%, M=±20% 25 0.32 300 2.52 2,000 L1207C220(_)PWST 22 K=±10%, M=±20% 19 0.49 255 2.52 2,000 L1207C330(_)PWST 33 K=±10%, M=±20% 15 0.75 215 2.52 2,000 L1207C470(_)PWST 47 K=±10%, M=±20% 12 0.92 205 2.52 2,000 L1207C680(_)PWST 68 K=±10%, M=±20% 11 1.49 145 2.52 2,000 L1207C101(_)PWST 100 K=±10%, M=±20% 8 2.40 140 0.796 2,000 L1207C151(_)PWST 150 K=±10%, M=±20% 7 3.20 105 0.796 2,000 L1207C221(_)PWST 220 K=±10%, M=±20% 5 5.40 80 0.796 2,000 L1207C331(_)PWST 330 K=±10%, M=±20% 4 7.00 65 0.796 2,000 L1207C471(_)PWST 470 K=±10%, M=±20% 3.5 14.00 54 0.796 2,000 L1207C681(_)PWST 680 K=±10%, M=±20% 3 17.00 45 0.796 2,000 L1207C102(_)PWST 1000 K=±10%, M=±20% 2.4 27.00 39 0.252 2,000 © KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-63006

0806 Case Size High Current Type (L-PWI Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L0806C1R0MPWIT 1.0 ±20% 100 0.10 690 7.96 2,000 L0806C1R5MPWIT 1.5 ±20% 80 0.15 600 7.96 2,000 L0806C2R2MPWIT 2.2 ±20% 70 0.20 520 7.96 2,000 L0806C3R3MPWIT 3.3 ±20% 55 0.27 410 7.96 2,000 L0806C4R7MPWIT 4.7 ±20% 45 0.37 355 7.96 2,000 L0806C6R8MPWIT 6.8 ±20% 38 0.59 290 7.96 2,000 L0806C100MPWIT 10 ±20% 32 0.82 245 2.52 2,000 L0806C150MPWIT 15 ±20% 28 1.20 200 2.52 2,000 L0806C220MPWIT 22 ±20% 16 1.80 165 2.52 2,000 L0806C330MPWIT 33 ±20% 14 2.80 135 2.52 2,000 L0806C470MPWIT 47 ±20% 11 4.30 110 2.52 2,000 L0806C680MPWIT 68 ±20% 10 7.00 95 2.52 2,000 L0806C101MPWIT 100 ±20% 8 8.00 75 0.796 2,000 Ordering Code Inductance (μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L0603B1R0MPWFT 1.0 ±20% 100 0.19 620 7.96 3,000 L0603B2R2MPWFT 2.2 ±20% 70 0.33 430 7.96 3,000 L0603B4R7MPWFT 4.7 ±20% 45 0.50 295 7.96 3,000 L0603B100(_)PWFT 10 K=±10%, M=±20% 40 1.20 200 2.52 3,000 L0603B220(_)PWFT 22 K=±10%, M=±20% 16 3.70 130 2.52 3,000 L0603B470(_)PWFT 47 K=±10%, M=±20% 11 5.80 90 2.52 3,000

0603 Case Size Standard Type (L-PWF Series - Bottom Surface Electrodes)

(_) - Insert Inductance Tolerance Code (K or M) (_) - Insert Inductance Tolerance Code (K or M) Ordering Code Inductance (μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L0805C1R0MPWIT 1.0 ±20% 100 0.19 620 7.96 3,000 L0805C2R2MPWIT 2.2 ±20% 70 0.33 430 7.96 3,000 L0805C4R7MPWIT 4.7 ±20% 45 0.50 295 7.96 3,000 L0805C100MPWIT 10 ±20% 40 1.20 200 2.52 3,000 L0805C220MPWIT 22 ±20% 16 3.70 130 2.52 3,000 L0805C470MPWIT 47 ±20% 11 5.80 90 2.52 3,000

0805 Case Size High Current Type (L-PWI Series)

1007 Case Size High Current Type (L-PWI Series)

1007 Case Size Low Rdc Type (L-PWR Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L1007C1R0MPWIT 1.0 ±20% 100 0.08 775 7.96 2,000 L1007R1R0MPWIT* 1.0 ±20% 100 0.065 890 7.96 2,000 L1007C1R5MPWIT 1.5 ±20% 80 0.11 660 7.96 2,000 L1007C2R2MPWIT 2.2 ±20% 68 0.13 600 7.96 2,000 L1007C3R3MPWIT 3.3 ±20% 54 0.16 500 7.96 2,000 L1007C4R7MPWIT 4.7 ±20% 41 0.20 430 7.96 2,000 L1007C6R8MPWIT 6.8 ±20% 38 0.30 360 7.96 2,000 L1007C100MPWIT 10 ±20% 30 0.36 300 2.52 2,000 L1007C150MPWIT 15 ±20% 23 0.65 250 2.52 2,000 L1007C220MPWIT 22 ±20% 19 0.77 210 2.52 2,000 L1007C330MPWIT 33 ±20% 15 1.50 170 2.52 2,000 L1007C470MPWIT 47 ±20% 12 1.90 150 2.52 2,000 L1007C680MPWIT 68 ±20% 9.5 2.80 120 2.52 2,000 L1007C101MPWIT 100 ±20% 9.0 3.70 100 0.796 2,000 L1007C151MPWIT 150 ±20% 7.0 6.10 85 0.796 2,000 L1007C221MPWIT 220 ±20% 5.5 8.40 70 0.796 2,000 L1007C331MPWIT 330 ±20% 4.5 12.30 60 0.796 2,000 L1007C471MPWIT 470 ±20% 3.5 22.00 45 0.796 2,000 L1007C681MPWIT 680 ±20% 3.0 28.00 35 0.796 2,000 Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L1007R1R0MPWRT 1.0 ±20% 100 0.045 400 7.96 2,000 L1007R2R2MPWRT 2.2 ±20% 68 0.07 280 7.96 2,000 L1007R4R7MPWRT 4.7 ±20% 45 0.1 200 7.96 2,000 L1007R100MPWRT 10 ±20% 30 0.19 180 2.52 2,000 L1007R220MPWRT 22 ±20% 19 0.44 120 2.52 2,000 L1007R470MPWRT 47 ±20% 11 0.84 95 2.52 2,000 L1007R101MPWRT 100 ±20% 9 1.89 75 0.796 2,000

0805 Case Size Low Rdc Type (L-PWR Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L0805R1R0MPWRT 1.0 ±20% 100 0.07 200 7.96 3,000 L0805R2R2MPWRT 2.2 ±20% 80 0.13 175 7.96 3,000 L0805R4R7MPWRT 4.7 ±20% 45 0.24 150 7.96 3,000 L0805R100MPWRT 10 ±20%. 32 0.36 125 2.52 3,000 L0805R220MPWRT 22 ±20% 16 1.00 100 2.52 3,000 L0805R470MPWRT 47 ±20% 11 1.70 75 2.52 3,000 L0805R101MPWRT 100 ±20% 8 4.00 50 0.796 3,000 Wire Wound Chip Inductors - L-PWS, L-PWF, L-PWI, L-PWR Series * Low Rdc Type

Small size wound chip inductor with high current • -ºC to +105ºC (including self-generated heat)
Dimension without directional influence on mountability and characteristics Applications:
Digital Still Cameras (DSC), Digital Video Cameras (DVC), PDA’s and other portable digital equipment
For DC-DC converter circuit EIA Case Size Metric Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 0603 1608 1.6 ±0.2 (0.063 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.4 ±0.15 (0.015 ±0.006) 0805 2012 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 0806 2016 2.0 ±0.2 (0.079 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 1007 2518 2.5 ±0.2 (0.098 ±0.008) 1.8 ±0.2 (0.071 ±0.008) 1.8 ±0.2 (0.071 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 1210 3225 3.2 ±0.2 (0.126 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 0.6 ±0.3 (0.024 ±0.012) E T W L Wire Wound Chip Inductors - L-DWS/L-DWI/L-DWL/L-DWF Series Part Numbering Table Dimension Table in millimeters (inches) Inductance Examples: 3N9 = 0.0039μH 1R0 = 1.0μH 10N = 0.01μH 100 = 10μH R10 = 0.1μH 101 = 100 μH Inductance Tolerance K = ±10%, M = ±20% Inductor L C0805 100 M DWS T Case Size (EIA) 0603 1007 0805 1210 0806 Type DWS = Standard Type DWI = High Current Type DWL = Low Profile DWF = Bottom Surface Electrode (See Part Number Table) Specification C = Commercial B = Bottom Surface Electrode R - Low Rdc Type Packaging Code T = Tape & Reel

0805 Case Size Standard Type (L-DWS Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L0805C2R2MDWST 2.2 ±20% 80 0.23 410 770 7.96 3,000 L0805C4R7MDWST 4.7 ±20% 45 0.40 300 580 7.96 3,000 L0805R100MDWST 10 ±20% 32 0.50 200 520 2.52 3,000 L0805C220MDWST 22 ±20% 16 1.70 135 280 2.52 3,000 L0805C470MDWST 47 ±20% 11 3.70 90 190 2.52 3,000

0805 Case Size High Current Type (L-DWI Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L0805C1R0MDWIT 1.0 ±20% 100 0.19 700 840 7.96 3,000 L0805C2R2MDWIT 2.2 ±20% 70 0.33 530 640 7.96 3,000 L0805C4R7MDWIT 4.7 ±20% 45 0.50 360 520 7.96 3,000 L0805C100MDWIT 10 ±20% 40 1.20 240 340 2.52 3,000 L0805C220MDWIT 22 ±20% 16 3.70 170 190 2.52 3,000 L0805C470MDWIT 47 ±20% 11 5.80 120 150 2.52 3,000

0806 Case Size High Current Type (L-DWI Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L0806C1R0MDWIT 1.0 ±20% 100 0.1 1100 1100 7.96 3,000 L0806C1R5MDWIT 1.5 ±20% 80 0.15 1000 1000 7.96 3,000 L0806C2R2MDWIT 2.2 ±20% 70 0.20 750 720 7.96 3,000 L0806C3R3MDWIT 3.3 ±20% 55 0.27 600 610 7.96 3,000 L0806C4R7MDWIT 4.7 ±20% 45 0.37 550 530 7.96 3,000 L0806C6R8MDWIT 6.8 ±20% 38 0.59 450 450 7.96 3,000 L0806C100(_)DWIT 10 K=±10%, M=±20% 32 0.82 380 350 2.52 3,000 L0806C150(_)DWIT 15 K=±10%, M=±20% 28 1.2 300 300 2.52 3,000 L0806C220(_)DWIT 22 K=±10%, M=±20% 16 1.8 250 240 2.52 3,000 L0806C330(_)DWIT 33 K=±10%, M=±20% 14 2.8 220 220 2.52 3,000 L0806C470(_)DWIT 47 K=±10%, M=±20% 11 4.3 150 150 2.52 3,000 L0806C680(_)DWIT 68 K=±10%, M=±20% 10 7 130 130 2.52 3,000 L0806C101(_)DWIT 100 K=±10%, M=±20% 8 8 110 110 0.796 3,000

0806 Case Size Standard Type (L-DWS Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L0806C2R2MDWST 2.2 ±20% 70 0.13 510 1000 7.96 2,000 L0806C4R7MDWST 4.7 ±20% 45 0.25 340 740 7.96 2,000 L0806C100MDWST 10 ±20% 32 0.50 250 520 2.52 2,000 L0806C220MDWST 22 ±20% 16 1.00 165 370 2.52 2,000 L0806C470MDWST 47 ±20% 11 2.40 110 240 2.52 2,000 *For rated current of ordinary small power choke coils, please refer to the rated current (1) in the above table. *For current (2) is the current for instantaneous flow such as plunging current of DC/DC converter. In case of usage in the circuit where large current may be semicontinuously applied over 5 minutes with auto recovery circuit, etc, please contact our sales section before practical application. Rated current (1):Current value to guarantee -30% of nominal inductance Rated current (2):Current value to guarantee component temperature within ΔT = 40°C with current flow. (It's not the current to guarantee the inductance value) (_) - Insert Inductance Tolerance Code (K or M)

1007 Case Size Standard Type (L-DWS Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L1007C2R2MDWST 2.2 ±20% 68 0.09 510 1300 7.96 2,000 L1007C4R7MDWST 4.7 ±20% 46 0.13 340 1100 7.96 2,000 L1007C100MDWST 10 ±20% 30 0.25 250 820 2.52 2,000 L1007C220MDWST 22 ±20% 19 0.50 165 580 2.52 2,000 L1007C470MDWST 47 ±20% 12 0.95 110 420 2.52 2,000 Wire Wound Chip Inductors - L-DWS, L-DWI, L-DWL, L-DWF Series

1007 Case Size High Current Type (L-DWI Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L1007C1R0MDWIT 1.0 ±20% 100 0.08 1000 1200 7.96 2,000 L1007C2R2MDWIT 2.2 ±20% 68 0.13 890 1100 7.96 2,000 L1007C4R7MDWIT 4.7 ±20% 41 0.20 680 920 7.96 2,000 L1007C100MDWIT 10 ±20% 30 0.36 480 680 2.52 2,000 L1007C220MDWIT 22 ±20% 19 0.77 320 460 2.52 2,000 L1007C470MDWIT 47 ±20% 12 1.90 240 290 2.52 2,000 L1007C101MDWIT 100 ±20% 9 3.7 160 170 0.796 2,000 L1007C220MDWIT 220 ±20% 5.5 8.4 115 110 0.796 2,000 L1007C470MDWIT 470 ±20% 3.5 22 80 70 0.796 2,000 L1007C681MDWIT 680 ±20% 3 28 65 60 0.796 2,000

1210 Case Size High Current Low Rdc Type (L-DWI Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity L1210R1R0MDWIT 1.0 ±20% 250 0.055 2000 1440 0.1 1,000 L1210R1R5MDWIT 1.5 ±20% 220 0.06 2000 1310 0.1 1,000 L1210R2R2MDWIT 2.2 ±20% 190 0.08 2000 1130 0.1 1,000 L1210R3R3MDWIT 3.3 ±20% 160 0.095 1800 1040 0.1 1,000 L1210R4R7MDWIT 4.7 ±20% 70 0.1 1250 1010 0.1 1,000 L1210R6R8MDWIT 6.8 ±20% 50 0.12 930 940 0.1 1,000 L1210R100(_)DWIT 10 K=±10%, M=±20% 23 0.133 900 900 0.1 1,000 L1210R150(_)DWIT 15 K=±10%, M=±20% 20 0.195 730 850 0.1 1,000 L1210R220(_)DWIT 22 K=±10%, M=±20% 17 0.27 620 780 0.1 1,000 L1210R330(_)DWIT 33 K=±10%, M=±20% 13 0.41 500 570 0.1 1,000 L1210R470(_)DWIT 47 K=±10%, M=±20% 10 0.67 390 480 0.1 1,000 L1210R680(_)DWIT 68 K=±10%, M=±20% 8 1 320 410 0.1 1,000 L1210R101(_)DWIT 100 K=±10%, M=±20% 6 1.4 270 340 0.1 1,000 (_) - Insert Inductance Tolerance Code (K or M) *For rated current of ordinary small power choke coils, please refer to the rated current (1) in the above table. *For current (2) is the current for instantaneous flow such as plunging current of DC/DC converter. In case of usage in the circuit where large current may be semicontinuously applied over 5 minutes with auto recovery circuit, etc, please contact our sales section before practical application. Rated current (1):Current value to guarantee -30% of nominal inductance (at 20ºC) Rated current (2):Current value to guarantee component temperature within ΔT = 40°C with current flow. (It's not the current to guarantee the inductance value) (_) - Insert Inductance Tolerance Code (K or M)

0603 Case Size Power, Bottom Surface Electrode Type (L-DWF 1608 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L0603B1R0MDWFT 1.0 ±20% 100 0.09 290 770 7.96 2,000 L0603B2R2MDWFT 2.2 ±20% 80 0.17 190 560 7.96 2,000 L0603B4R7MDWFT 4.7 ±20% 45 0.24 145 470 7.96 2,000 L0603B100(_)DWFT 10 K=±10%, M=±20% 32 0.36 115 380 2.52 2,000 L0603B220(_)DWFT 22 K=±10%, M=±20% 16 1.00 70 230 2.52 2,000 L0603B470(_)DWFT 47 K=±10%, M=±20% 11 2.5 50 140 2.52 2,000

0805 Case Size Low Profile Type (L-DWL Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 L0805C4R7MDWLT 4.7 ±20% 45 0.66 275 490 0.10 4,000 L0805C100MDWLT 10 ±20% 32 1.00 205 370 0.10 4,000 L0805C470MDWLT 47 ±20% 11 4.20 100 140 0.10 4,000

Multilayer inductor made of advanced ceramics with low • 0201: -55ºC to +125ºC resistivity silver used as internal conductors, provides • 0402: -55ºC to +125ºC excellent Q and SRF characteristics &WR&
Multilayer block structure ensures outstanding reliability, • 0805: -40ºC to +85ºC high productivity and excellent product quality Applications:
Designed to address surface mount inductor needs for applications above 100MHz
Mobile phones and pagers
High frequency circuits
EMI counter measures in high frequency circuits EIA Case Size Metric Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 0201 0603 0.6 ±0.03 (0.024 ±0.001) 0.3 ±0.03 (0.012 ±0.001) 0.3 ±0.03 (0.012 ±0.001) 0.15 ±0.05 (0.006 ±0.002) 0402 1005 1.0 ±0.05 (0.039 ±0.002) 0.5 ±0.05 (0.02 ±0.002) 0.5 ±0.05 (0.02 ±0.002) 0.25 ±0.10 (0.01 ±0.004) 0603 1608 1.6 ±0.15 (0.063 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.3 ±0.2 (0.012 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 1.0 +0.2/-0.3 (0.033 ±0.008) 0.5 ±0.3 (0.020 ±0.012) E T WL Multilayer Chip Inductors for High Frequency - L-RMS Series Part Numbering Table Dimension Table in millimeters (inches) Multilayer Chip Inductors - High Frequency - L-RMS Series Inductance Examples: 3N9 = 3.9nH 10N = 10.0nH R10 = 100nH R12 = 120nH Inductance Tolerance C = ±0.2nH H = ±3% J = ±5% S = ±0.3nH Inductor L C0402 2N2 S RMS T Case Size (EIA) 0201 0603 0402 0805 Type RMS = High Frequency Specification C = Commercial Packaging Code T = Tape & Reel

0201 Case Size Multilayer Chip Inductors for High Frequency (L-RMS Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ. max. typ.

0402 Case Size Multilayer Chip Inductors for High Frequency (L-RMS Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ. max. tvp. -55° to 125°C -55° to 85°C Multilayer Chip Inductors - High Frequency - L-RMS Series

0603 Case Size Multilayer Chip Inductors for High Frequency (L-RMS Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ max. typ.

0805 Case Size Multilayer Chip Inductors for High Frequency (L-RMS Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ. max. typ. Multilayer Chip Inductors - High Frequency - L-RMS Series

Internal printed coil structure creates a closed magnetic circuit • -40ºC to +85ºC which acts as a magnetic shield eliminating crosstalk, thus permitting higher mounting densities.
Multilayer block structure yields higher reliability
The smallest mH inductors in the world (SMS 0402 Series)
Low DC power dissipation due to Low Rdc with High Aspect Ratio internal conductor that stands on the Green Sheet and Printing technologies (DMI Series) Applications:
Any general circuit in portable equipment in which a compact size and high mounting densities are required (SMS Series)
Separation of analog and digital circuits (PMS Series)
Prevents interference between PLL and other digital circuits (PMS Series)
DC/DC convertor for mobile equipment, cellular phones, DSC and DVC (PMS Series) EIA Case Size Metric Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 0402 1005 1.0 ±0.05 (0.039 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.25 ±0.10 (0.010 ±0.004) 0603 1608 1.6 ±0.15 (0.063 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.3 ±0.2 (0.012 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 1.25 ±0.2 (0.033 ±0.008) (0.049 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 1008 2520 2.5 ± 0.2 (0.098 ± 0.008) 2.0 ± 0.2 (0.079 ± 0.008) 1.0 Max. (0.039) 0.5 ± 0.3 (0.02 ± 0.012) E T WL Multilayer Chip Inductors - L-SMS/L-PMS/L-DMI Series Part Numbering Table Dimension Table in millimeters (inches) Inductance Examples: 47N = 0.047μH 100 = 10 μH R15 = 0.15μH 150 = 15μH 1R5 = 1.5μH Inductance Tolerance K = ±10%, M = ±20% Inductor L C0603 1R5 K SMS T Case Size (EIA) 0402 0805 0603 1008 Type SMS = Standard Type PMS = Standard Type DMI = High Current Type for Power Supply Line Specification C = Commercial Packaging Code T = Tape & Reel

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 17 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0402 Case Size Multilayer Chip Inductors (L-SMS Series)

(_) - Insert Inductance Tolerance Code (K or M) Multilayer Chip Inductors - L-SMS, L-PMS, L-DMI Series

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630018 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Case Size Multilayer Chip Inductors (L-SMS Series)

(_) - Insert Inductance Tolerance Code (K or M)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 19 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0805 Case Size Multilayer Chip Inductors (L-SMS Series)

(_) Insert Tolerence Code (K±10% or M±20%) listed to the right Multilayer Chip Inductors - L-SMS, L-PMS, L-DMI Series

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630020 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0805 Case Size Multilayer Chip Inductors (L-PMS Series)

(μH) Inductance Tolerance Minimum Inductance at 200mA (μH) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Case Size Multilayer Chip Inductors (L-PMS Series)

(μH) Inductance Tolerance Minimum Inductance at 200mA (μH) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

1008 Case Size Multilayer Chip Inductors (L-DMI Series)

Small and low profile inductor • For small DC/DC converter; cellular phones,
Corresponds to high current HDD, HVC, DSC, and PDA LCD display
Simple and original magnetic shield structure Operating Temperature:
Structure strong against shock-proof • -25ºC to +120ºC (including self-generated heat) Metric Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) F 3010 3.0 ±0.1 (0.118 ±0.004) 3.0 ±0.1 (0.118 ±0.004) 1.0 max. (0.039 max.) 0.9 ±0.2 (0.035 ±0.008) 1.9 ±0.2 (0.075 ±0.008) 4010 4.0 ±0.2 (0.157 ±0.008) 4.0 ±0.2 (0.157 ±0.008) 1.0 max. (0.039 max.) 1.1 ±0.2 (0.043 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 4012 4.0 ±0.2 (0.157 ±0.008) 4.0 ±0.2 (0.157 ±0.008) 1.2 max. (0.047 max.) 1.1 ±0.2 (0.043 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 4018 4.0 ±0.2 (0.157 ±0.008) 4.0 ±0.2 (0.157 ±0.008) 1.8 max. (0.071 max.) 1.1 ±0.2 (0.043 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 8040 8.0 ±0.2 (0.315 ±0.008) 8.0 ±0.2 (0.315 ±0.008) 4.2 max (0.165 max) 1.6 ±0.3 (0.063 ±0.012) 5.6 ±0.3 (0.220 ±0.012) Low Profile SMD Inductors (L-DWD Series) Part Numbering Table Dimension Table in millimeters (inches) L W H E E F Dimensions 3.0mm x 3.0mm (L-DWD3010 Type, 1.0mm Max. Height) Ordering Code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Heigh (mm) Tape & Reel Packaging Quantity L3010C1R0NDWDT 1.0 ±30% 100 126 0.065 1300 1.0 2,000 L3010C1R5NDWDT 1.5 ±30% 100 98 0.08 1200 1.0 2,000 L3010C2R2MDWDT 2.2 ±20% 100 82 0.095 1100 1.0 2,000 L3010C3R3MDWDT 3.3 ±20% 100 63 0.14 870 1.0 2,000 L3010C4R7MDWDT 4.7 ±20% 100 56 0.19 750 1.0 2,000 L3010C6R8MDWDT 6.8 ±20% 100 46 0.30 610 1.0 2,000 L3010C100MDWDT 10 ±20% 100 35 0.45 500 1.0 2,000 L3010C150MDWDT 15 ±20% 100 30 0.74 400 1.0 2,000 L3010C220MDWDT 22 ±20% 100 25 1.03 350 1.0 2,000 L3010C330MDWDT 33 ±20% 100 20 1.55 260 1.0 2,000 L3010C470MDWDT 47 ±20% 100 17 2.05 220 1.0 2,000 Dimensions 4.0mm x 4.0mm (L-DWD4010 Type, 1.0mm Max. Height) Ordering code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Height (mm) Tape & Reel Packaging Quantity L4010C1R0NDWDT 1.0 ±30% 100 116 0.10 1050 1.0 5,000 L4010C2R2NDWDT 2.2 ±30% 100 73 0.15 890 1.0 5,000 L4010C3R3MDWDT 3.3 ±20% 100 58 0.18 820 1.0 5,000 L4010C4R7MDWDT 4.7 ±20% 100 47 0.21 750 1.0 5,000 L4010C6R8MDWDT 6.8 ±20% 100 38 0.30 620 1.0 5,000 L4010C100MDWDT 10 ±20% 100 31 0.38 560 1.0 5,000 L4010C150MDWDT 15 ±20% 100 24 0.51 470 1.0 5,000 L4010C220MDWDT 22 ±20% 100 19 0.87 360 1.0 5,000 L4010C330MDWDT 33 ±20% 100 15 1.54 280 1.0 5,000 L4010C470MDWDT 47 ±20% 100 13 1.81 240 1.0 5,000 Low Profile SMD Inductors - L-DWD Series Inductance Examples: 2R2 = 2.2μH; 100 = 10μH; 101 = 100μH Inductance Tolerance M = ±20%; N = 30% Inductor L C4012 100 M DWD T Case Size (EIA) 3010, 4010, 4012, 4018, 8040 Type DWD = Coating resin specificationSpecification C = Commercial Packaging Code T = Tape & Reel

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630022 Dimensions 4.0mm x 4.0mm (L-DWD4012 Type, 1.2mm Max. Height) Dimensions 4.0mm x 4.0mm (L-DWD4018 Type, 1.8mm Max. Height) Dimensions 8.0mm x 8.0mm (L-DWD8040 Type, 4.2mm Max. Height) Ordering Code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Height (mm) Tape & Reel Packaging Quantity L4012C1R0NDWDT 1.0 ±30% 100 131 0.06 1500 1.2 4,500 L4012C2R2MDWDT 2.2 ±20% 100 66 0.09 1200 1.2 4,500 L4012C3R3MDWDT 3.3 ±20% 100 50 0.13 980 1.2 4,500 L4012C4R7MDWDT 4.7 ±20% 100 45 0.14 960 1.2 4,500 L4012C6R8MDWDT 6.8 ±20% 100 35 0.18 840 1.2 4,500 L4012C100MDWDT 10 ±20% 100 28 0.24 740 1.2 4,500 L4012C150MDWDT 15 ±20% 100 23 0.40 560 1.2 4,500 L4012C220MDWDT 22 ±20% 100 18 0.48 510 1.2 4,500 L4012C330MDWDT 33 ±20% 100 15 0.81 400 1.2 4,500 L4012C470MDWDT 47 ±20% 100 12 1.00 350 1.2 4,500 Ordering Code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Heigh (mm) Tape & Reel Packaging Quantity L4018C1R0NDWDT 1.0 ±30% 100 80 0.03 1830 1.8 3,500 L4018C2R2MDWDT 2.2 ±20% 100 52 0.06 1440 1.8 3,500 L4018C3R3MDWDT 3.3 ±20% 100 44 0.07 1230 1.8 3,500 L4018C4R7MDWDT 4.7 ±20% 100 34 0.09 1200 1.8 3,500 L4018C6R8MDWDT 6.8 ±20% 100 29 0.11 1060 1.8 3,500 L4018C100MDWDT 10 ±20% 100 24 0.18 840 1.8 3,500 L4018C150MDWDT 15 ±20% 100 19 0.25 650 1.8 3,500 L4018C220MDWDT 22 ±20% 100 16 0.36 590 1.8 3,500 L4018C330MDWDT 33 ±20% 100 12 0.53 490 1.8 3,500 L4018C470MDWDT 47 ±20% 100 10 0.65 420 1.8 3,500 L4018C680MDWDT 68 ±20% 100 8.3 1.00 320 1.8 3,500 L4018C101MDWDT 100 ±20% 100 6.5 1.50 280 1.8 3,500 L4018C221MDWDT 220 ±20% 100 4 4.00 170 1.8 3,500 Ordering Code Inductance (μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Heigh (mm) Tape & Reel Packaging Quantity L8040C0R9NDWDT 0.9 ±30% 100 85 0.006 7800 4.0 1,000 L8040C1R4NDWDT 1.4 ±30% 100 63 0.007 7000 4.0 1,000 L8040C2R0NDWDT 2.0 ±30% 100 50 0.009 6300 4.0 1,000 L8040C3R6NDWDT 3.6 ±30% 100 34 0.015 4900 4.0 1,000 L8040C4R7NDWDT 4.7 ±30% 100 30 0.018 4100 4.0 1,000 L8040C6R8NDWDT 6.8 ±30% 100 24 0.025 3700 4.0 1,000 L8040C100MDWDT 10 ±20% 100 22 0.034 3100 4.2 1,000 L8040C150MDWDT 15 ±20% 100 16 0.050 2400 4.2 1,000 L8040C220MDWDT 22 ±20% 100 13 0.066 2200 4.2 1,000 L8040C330MDWDT 33 ±20% 100 12 0.100 1700 4.2 1,000 L8040C470MDWDT 47 ±20% 100 8 0.150 1400 4.2 1,000 L8040C680MDWDT 68 ±20% 100 7 0.230 1100 4.2 1,000 L8040C101MDWDT 100 ±20% 100 6 0.290 1000 4.2 1,000

Power supply units: • Combats power line radiated and conducted noise Large withstand voltage (allowable current up to 6A) • Provides waveform correction of digital signals and high frequency noise Resistant to high energy countermeasures in various types of digital equipment High reliability • Automotive
There are several variations of the standard (Z-PWS) type (10th digit in part number) • Computer peripherals “A” for broadband • Differential transmission line on USB and similar products “B” for upper MHz range applications • Mobile devices which require lower power consumption “G” for GHz range applications
The Z-PWZ type is optimal for circuit designs which require impedance and large Operating Temperature: currents to combat radiated noise on power lines, etc. • -40ºC to +125ºC (includes self-generated heat) Characteristic Code EIA Case Size Metric Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) Z-PWS 0603 1608 1.6 ±0.2 (0.063 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.3 ±0.2 (0.012 ±0.008) 0805 2125 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 (0.02 ±0.002) 0.5 ±0.3 (0.020 ±0.012) 1206 3216 3.2 ±0.3 (0.126 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 1806 4516 4.5 ±0.3 (0.177 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) Z-PWZ 0603 1608 1.6 ±0.1 (0.063 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.3 ±0.15 (0.012 ±0.006) 0805 2012 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 (0.02 ±0.002) 0.5 ±0.3 (0.020 ±0.012) 0806 2016 2.0 ±0.2 (0.079 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 1206 3216 3.2 ±0.3 (0.126 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 1210 3225 3.2 ±0.3 (0.126 ±0.012) 2.5 ±0.3 (0.098 ±0.012) 2.5 ±0.3 (0.098 ±0.012) 0.5 ±0.3 (0.020 ±0.012) 1806 4516 4.5 ±0.3 (0.177 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 1810 4525 4.5 ±0.4 (0.177 ±0.016) 2.5 ±0.3 (0.098 ±0.012) 2.5 ±0.3 (0.098 ±0.012) 0.9 ±0.6 (0.035 ±0.024) 1812 4532 4.5 ±0.4 (0.177 ±0.016) 3.2 ±0.3 (0.126 ±0.012) 3.2 ±0.3 (0.126 ±0.012) 0.9 ±0.6 (0.035 ±0.024) E T W L High Current Ferrite Chip Beads - Z-PWS/Z-PWZ Series Part Numbering Table Dimension Table in millimeters (inches) High Current Ferrite Chip Beads - Z-PWS, Z-PWZ Series Impedance Examples: 330 = 33ΩΩ; 111 = 110ΩΩ; 132 = 1300ΩΩ Material A,B,C,D,E,F,G Contact KEMET for materials characteristics Ferrite Bead Z C1206 330 G PWS T Case Size Z-PWS = 0603, 0805, 1206, 1806 Z-PWZ = 0603, 0805, 0806, 1206, 1210, 1806, 1810, 1812 Type PWS = Regular type PWZ = High currentSpecification C = Commercial Packaging Code T = Tape & Reel

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630024 Ordering Code Impedance (ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Case Size High Current Ferrite Chip Beads (Z-PWS Series)

0805 Case Size High Current Ferrite Chip Beads (Z-PWS Series)

(ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

1206 Case Size High Current Ferrite Chip Beads (Z-PWS Series)

(ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

1806 Case Size High Current Ferrite Chip Beads (Z-PWS Series)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 25 0603-1812 Case Size High Impedance Type Ferrite Chip Beads (Z-PWZ Series) Ordering Code EIA Case Size Impedance (ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Case Size High Impedance Ferrite Chip Beads (Z-PWZ Series)

0805 Case Size High Impedance Ferrite Chip Beads (Z-PWZ Series)

0806 Case Size High Impedance Ferrite Chip Beads (Z-PWZ Series)

1206 Case Size High impedance Ferrite Chip Beads (Z-PWZ Series)

1210 Case Size High Impedance Ferrite Chip Beads (Z-PWZ Series)

1806 Case Size High Impedance Ferrite Chip Beads (Z-PWZ Series)

1810 Case Size High Impedance Ferrite Chip Beads (Z-PWZ Series)

1812 Case Size High Impedance Ferrite Chip Beads (Z-PWZ Series)

High Current Ferrite Chip Beads - Z-PWS, Z-PWZ Series

Internal silver printed layer creates a closed circuit which acts as a magnetic shield to minimize heat generation and crosstalk
No need for grounding provides greater circuit design flexibility
Several material types and a broad range of impedance values provide noise countermeasures for various applications (10th digit in part number) “A” Suppresses the XL component. Helps stop the reduction of the wave-form integrity (digital wave-form overshoot, etc) “B” Increases the Z characteristics sharply above 20MHz and is applicable for radiated noise in the 100MHz-300MHz range. Especially effective on video signal lines. “C” Designed as a noise countermeasure for 200MHz-500MHz range where the rise of the Z component is in the high frequency area. “D” Intended for noise suppression around 200MHz. Effectively increase attenuation “E” The best material in the Z-SMS Series to suppress the XL component and stop the reduction of the wave-form integrity while maintaining attenuation in the high frequency area. “F” Reduced DC resistance version for noise countermeasures around LSI power supplies Z-PMS Features:
Low Rdc values reduce power dissipation and extend battery life
No need for grounding provides greater circuit design flexibility EIA Case Size Metric Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 0201 0603 0.6 ±0.03 (0.2 ±0.001) 0.30 ±0.03 (0.012 ±0.001) 0.30 ±0.03 (0.012 ±0.001) 0.15 ±0.05 (0.006 ±0.002) 0402 1005 1.00 ±0.05 (0.039 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.25 ±0.10 (0.010 ±0.004) 0603 1608 1.6 ±0.15 (0.063 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.3 ±0.2 (0.012 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 (0.033 ±0.008) 0.5 ±0.3 (0.020 ±0.012) Multilayer Ferrite Chip Beads - Z-SMS/Z-PMS Series Part Numbering Table Dimension Table in millimeters (inches) Z-SMS Applications:
High frequency noise countermeasure in personal computers, digital cameras and other information system products. For use on digital product clock lines and general signal lines.
Radiated noise suppression in computer or printer interfaces harness connectors.
Noise suppression in video and other AV products
Prevents interference between circuits in cellular phones (PHS, PDC, etc)
Due to the closed internal circuit which acts as a magnetic shield, the “F” material is extremely effective as a noise filter on LSI power supplies where downsizing of components is needed. Z-PMS Applications:
High frequency noise countermeasures on the DC power supply line in personal computers and other information system products
Noise suppression in USB and IEEE1294 interface
Prevents interference between circuits in mobile systems (PDC, PHS, PDA) Operating Temperature:
Z-SMS: -55ºC to +125ºC (includes self-generated heat)
Z-PMS: -55ºC to +85ºC (includes self-generated heat) E T W L Impedance Examples: 150 = 15ΩΩ; 101 = 100ΩΩ; 102 = 1000ΩΩ Material A,B,C,D,E,F - Contact KEMET for materials characteristics Ferrite Bead Z C0402 121 B SMS T Case Size 0201 0603 0402 0805 Type SMS = Standard for signal lines PMS = For power supply lines Specification C = Commercial Packaging Code T = Tape & Reel

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 27 Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity

0201 Multilayer Ferrite Chip Beads Standard Type (Z-SMS Series)

0402 Multilayer Ferrite Chip Beads Standard Type (Z-SMS Series)

0402 Multilayer Ferrite Chip Beads For Power Lines (Z-PMS Series)

Multilayer Ferrite Chip Beads - Z-SMS, Z-PMS Series

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630028 Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Multilayer Ferrite Chip Beads Standard Type (Z-SMS Series)

0603 Multilayer Ferrite Chip Beads For Power Lines (Z-PMS Series)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 29 Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ)+25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity

0805 Multilayer Ferrite Chip Beads Standard Type (Z-SMS Series)

0805 Multilayer Ferrite Chip Beads For Power Lines (Z-PMS Series)

Multilayer Ferrite Chip Beads - Z-SMS, Z-PMS Series

All electronic components or devices listed in this catalog are developed, designed and intended for use in general electronic equipment. Before incorporating these components into any equipment in the fields of aerospace, military or medical, where higher safety and reliability are required, please contact KEMET Corporation for more details.

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 World Sales Headquarters KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 Phone: 864-963-6300 Europe KEMET Electronics S.A. 15bis chemin des Mines

1202 Geneva, Switzerland

Phone: 41-22-715-0100 Asia KEMET Electronics Marketing PTE Ltd.

73 Bukit Timah Road

#05-01 Rex House Singapore, 229832, Singapore Phone: 65-6586-1900 KEMET Electronics Asia Ltd.

30 Canton Road, Room 1512

Tsimshatshui, Kowloon Hong Kong Phone: 852-2305-1168

Product Information

L1007B1R0MDWST specifications and overview.

Summary

Surface Mount Ferrite Products

Description

Surface Mount Ferrite Products

Source title L1007B1R0MDWST Datasheet(PDF) - Kemet Corporation

Related Parts

More parts from the same family.

Browse manufacturer