KWC3L5L2.TK-T3T9-4L07M0

KWC3L5L2.TK AMSCO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 25

Technical content

KW C3L5L2.TK 1 Version 1.2 | 2021-09-01 Produktdatenblatt | Version 1.1 www.osram-os.com

Applications

KW C3L5L2.TK OSLON ® Submount PL The OSLON Submount PL is able to meet a wide range of requirements in terms of output and adapt- ability to ambient conditions. It offers a uniform light pattern, thermal stability and great brightness. Headlamps, LED & Laser & Night Vision Features: Package: compact lightsource in multi chip on board technology Chip technology: UX:3 Typ. Radiation: 120° (Lambertian emitter) Color: Cx = 0.325, Cy = 0.345 acc. to CIE 1931 ( ● white) Corrosion Robustness Class: 3A Qualifications: AEC-Q102 Qualified ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) Color over angle: Better than passus 3.7.2.1 of supplement proposal 7 to ECE reg. 128

KW C3L5L2.TK 2 Version 1.2 | 2021-09-01

Ordering Information

Type Luminous Flux 1) Ordering Code IF = 1000 mA ΦV KW C3L5L2.TK-T3T9-4L07M0 1100 ... 1425 lm Q65113A0769

KW C3L5L2.TK 3 Version 1.2 | 2021-09-01 Maximum Ratings Parameter Symbol Values Operating Temperature 2) Top min. max. -40 °C 135 °C Storage Temperature Tstg min. max. -40 °C 135 °C Junction Temperature Tj max. 150 °C Junction Temperature for short time applications* Tj max. 165 °C Case Temperature Tcase max. 135 °C Forward current TC = 25 °C IF min. max. 50 mA 1500 mA Surge current t ≤ 10 µs; D = 0.016 ; TC = 25 °C IFS max. 2500 mA ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) VESD 8 kV Reverse current 3) IR max. 200 mA *The median lifetime (L70/B50) for Tj =165°C is 200h. For Tc testing, please refer to Application Note: “AN085 Thermal measurement point of LEDs”

KW C3L5L2.TK 4 Version 1.2 | 2021-09-01 Characteristics IF = 1000 mA; TC = 25 °C Parameter Symbol Values Chromaticity Coordinate 4) Cx Cy typ. typ. 0.325 0.345 Viewing angle at 50% IV 2φ typ. 120 ° Radiating surface Acolor typ. 3.3 mm² Forward Voltage 5) IF = 1000 mA VF min. typ. max. 8.40 V 9.65 V 10.15 V Reverse voltage (ESD device) VR ESD min. 45 V Reverse voltage 3) IR = 20 mA VR max. 1.2 V Real thermal resistance junction/board 6) RthJB real typ. max.

1.6 K / W

2.6 K / W

Electrical thermal resistance junction/board 6) with efficiency ηe = 38 % RthJB elec. typ. max.

0.99 K / W

1.61 K / W

KW C3L5L2.TK 5 Version 1.2 | 2021-09-01 Brightness Groups Group Luminous Flux 1) Luminous Flux 1) IF = 1000 mA IF = 1000 mA min. max. ΦV ΦV T3 1100 lm 1140 lm T4 1140 lm 1185 lm T5 1185 lm 1230 lm T6 1230 lm 1275 lm T7 1275 lm 1325 lm T8 1325 lm 1375 lm T9 1375 lm 1425 lm

KW C3L5L2.TK 6 Version 1.2 | 2021-09-01 Chromaticity Coordinate Groups 4) /g38/g91 /g38/g91 /g38/g92 /g38/g92 400- 380n m 500n m 550n m 600 nm 700 - 750n m 7M0 6M0 5M0 4M0 7L0 6L0 5L0 4L0

KW C3L5L2.TK 7 Version 1.2 | 2021-09-01 Chromaticity Coordinate Groups 4) Group Cx Cy 4L0 0.3100 0.3065 0.3100 0.3185 0.3160 0.3306 0.3160 0.3186 4M0 0.3100 0.3140 0.3100 0.3270 0.3160 0.3391 0.3160 0.3261 5L0 0.3160 0.3186 0.3160 0.3306 0.3221 0.3427 0.3221 0.3307 Group Cx Cy 5M0 0.3160 0.3261 0.3160 0.3391 0.3221 0.3512 0.3221 0.3382 6L0 0.3221 0.3307 0.3221 0.3427 0.3281 0.3548 0.3281 0.3428 6M0 0.3221 0.3382 0.3221 0.3512 0.3254 0.3578 0.3281 0.3597 0.3281 0.3503 Group Cx Cy 7L0 0.3281 0.3428 0.3281 0.3548 0.3317 0.3620 0.3342 0.3635 0.3342 0.3549 7M0 0.3281 0.3503 0.3281 0.3597 0.3342 0.3635 0.3342 0.3624

KW C3L5L2.TK 8 Version 1.2 | 2021-09-01 Group Name on Label Example: T3-4L0 Brightness Color Chromaticity T3 4L0

KW C3L5L2.TK 9 Version 1.2 | 2021-09-01 Relative Spectral Emission 7) Φrel = f (λ); IF = 1000 mA; TC = 25 °C KW C3L5L2.TK 350 400 450 500 550 600 650 700 750 800 λ /n m 0.0 0.2 0.4 0.6 0.8 1.0Φrel Note:P ercentage of red: >5%a cc. to ECEr egulation Percentage of UV:< 10-5W/lm acc. to ECEr egulation :V λ :w hite Radiation Characteristics 7) Irel = f (ϕ); TC = 25 °C KW C3L5L2.TK -100° -90° -80° -70° -60° -50° -40° -30° ϕ /° 0.0 0.2 0.4 0.6 0.8

1.0 Irel

KW C3L5L2.TK 10 Version 1.2 | 2021-09-01 Forward current 7) IF = f(VF); TC = 25 °C KW C3L5L2.TK 8 10.28.59 .0 9.5 VF /V 1500 200 400 600 800 1000 1200 1400 IF /m A Relative Luminous Flux 7), 8) Φv/Φv(1000 mA) = f(IF); TC = 25 °C KW C3L5L2.TK 50 1500400 800 1200 IF /m A 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 ΦV ΦV(1000mA) Chromaticity Coordinate Shift 7) Cx, Cy = f(IF); TC = 25 °C KW C3L5L2.TK 50 1500400 600 800 120 IF /m A 0.32 0.33 0.34 0.35 0.36 0.37Cx Cy :C x :C y

KW C3L5L2.TK 11 Version 1.2 | 2021-09-01 Forward Voltage 7) ΔVF = VF - VF(25 °C) = f(Tj); IF = 1000 mA KW C3L5L2.TK -40- 20 02 04 06 08 0 100120140 Tj /° C -0.6 -0.4 -0.2 0.0 0.2 0.4 ∆VF /V Relative Luminous Flux 7) Φv/Φv(25 °C) = f(Tj); IF = 1000 mA KW C3L5L2.TK -40- 20 02 04 06 08 0 100120140 Tj /° C 0.0 0.2 0.4 0.6 0.8 1.0 1.2Φv Φv(25°C) Chromaticity Coordinate Shift 7) Cx, Cy = f(Tj); IF = 1000 mA KW C3L5L2.TK -40- 20 02 04 06 08 0 100120140 Tj /° C 0.31 0.32 0.33 0.34 0.35 0.36Cx Cy :C x :C y

KW C3L5L2.TK 12 Version 1.2 | 2021-09-01 Max. Permissible Forward Current IF = f(T) 02 04 06 08 01 00 120 140 T /° C 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600IF /m A KW C3L5L2.TK :T s Permissible Pulse Handling Capability IF = f(tp); D: Duty cycle 10-6 10-5 10-4 10-3 0.01 0.11 10 Pulset ime /s 1.4 1.6 1.8 2.0 2.2 2.4 IF /A TS =0 °C ... 119°C KW C3L5L2.TK :D =1 .0 :D =0 .5 :D =0 .2 :D =0 .1 :D =0 .05 :D =0 .02 :D =0 .01 :D =0 .005 Permissible Pulse Handling Capability IF = f(tp); D: Duty cycle 10-6 10-5 10-4 10-3 0.01 0.11 10 Pulset ime /s 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4IF /A TS = 135°C KW C3L5L2.TK :D =1 .0 :D =0 .5 :D =0 .2 :D =0 .1 :D =0 .05 :D =0 .02 :D =0 .01 :D =0 .005

KW C3L5L2.TK 13 Version 1.2 | 2021-09-01 Permissible F. Handling Capability f: Frequency 01 02 03 04 05 06 07 08 09 0 100 Duty Cycle /% 0.0 0.5 1.0 1.5 2.0 IF /A KW C3L5L2.TK TS =0 °C ... 119°C :f= 60Hz :f= 120Hz :f= 240Hz :f= 400Hz :f= 800Hz :f= 1000Hz Permissible F. Handling Capability f: Frequency "" " 01 02 03 04 05 06 07 08 09 0 100 Duty Cycle /% 0.0 0.5 1.0 1.5 2.0 IF /A KW C3L5L2.TK TS = 135°C :f= 60Hz :f= 120Hz :f= 240Hz :f= 400Hz :f= 800Hz :f= 1000Hz

KW C3L5L2.TK 14 Version 1.2 | 2021-09-01 Dimensional Drawing 9) Further Information: Approximate Weight: 38.0 mg Corrosion test: Class: 3A Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43) ESD advice: The device is protected by ESD device which is connected in parallel to the Chip.

KW C3L5L2.TK 15 Version 1.2 | 2021-09-01 Electrical Internal Circuit

KW C3L5L2.TK 16 Version 1.2 | 2021-09-01 Taping 9)

KW C3L5L2.TK 17 Version 1.2 | 2021-09-01 Tape and Reel 10) Reel Dimensions A W Nmin W1 W2 max Pieces per PU 180 mm 12 + 0.3 / - 0.1 mm 60 mm 12.4 + 2 mm 18.4 mm 2000

KW C3L5L2.TK 18 Version 1.2 | 2021-09-01 Barcode-Product-Label (BPL) Dry Packing Process and Materials 9) OHA00539 OSRAM Moisture-sensitive label or print Barcode label Desiccant Humidity indicator Barcode label OSRAM Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. WET Do not eat. Comparator check dot parts still adequately dry. examine units, if necessary examine units, if necessary 15% 10%bake units bake units If wet, change desiccant If wet, Humidity Indicator MIL-I-8835 If wet, M oisture Level 3 Floor tim e 168 Hours M oisture Level 6 Floor tim e 6 Hours a) Hum idity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or reflow, vapor-phase reflow, or equivalent processing (peak package 2. After this bag is opened, devices that will be subjected to infrared 1. Shelf life in sealed bag: 24 m onths at < 40 ˚C and < 90% relative hum idity (RH). M oisture Level 5a at factory conditions of (if blank, seal date is identical with date code). a) M ounted within b) Stored at body tem 3. Devices require baking, before m ounting, if: Bag seal date M oisture Level 1 M oisture Level 2 M oisture Level 2a4. If baking is required, b) 2a or 2b is not m et. Date and tim e opened: reference IPC/JEDEC J-STD-033 for bake procedure. Floor tim e see below If blank, see bar code label Floor tim e > 1 Year Floor tim e 1 Year Floor tim e 4 W eeks10% RH. M oisture Level 4 M oisture Level 5 ˚C). OPTO SEMICONDUCTORS MOISTURE SENSITIVE This bag contains CAUTION Floor tim e 72 Hours Floor tim e 48 Hours Floor tim e 24 Hours 30 ˚C/60% RH. LEVEL If blank, see bar code label Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033.

KW C3L5L2.TK 19 Version 1.2 | 2021-09-01 wire bonding scheme: CB = contact block Active Area = bond area Probing Area = used by OSRAM OS

KW C3L5L2.TK 20 Version 1.2 | 2021-09-01 CChhiipp TTeecchhnnoollooggyy:: 55:: Standard power class EEnnccaappssuullaanntt TTyyppee // LLeennss PPrrooppeerrttiieess LL:: No lens (Lambertian) EEmmiissssiioonn ccoolloorr:: WW:: white PPrroodduucctt vveerrssiioonn KK:: Automotive and Industry Product TTeecchhnnoollooggyy CCoonncceepptt LL:: Silicone encapsulation (casting); Platform: Ceramic PPaacckkaaggee TTyyppee CC:: Toplooker Ceramic package w/o reflector LLeeaadd // PPaacckkaaggee PPrrooppeerrttiieess CCeerraammiicc ppaacckkaaggeess:: 22:: 3538 33:: 4638 TTyyppee DDeessiiggnnaattiioonn SSyysstteemm KK WW CC 22 LL 55 LL 11 .. TT EE BBiinnnniinngg IInnffoorrmmaattiioonn:: Converted colors EE:: ECE binning:IEC 62707 (i.e. ebxD68) K: FWL color binning for next generation products CCoonnvveerrtteedd CCoolloorrss TT:: greenish cold white

KW C3L5L2.TK 21 Version 1.2 | 2021-09-01 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet fall into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye ex- ists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoy- ance, visual impairment, and even accidents, depending on the situation. Subcomponents of this device contain, in addition to other substances, metal filled materials. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers avoid device exposure to aggressive substances during storage, production, and use. For further application related information please visit www.osram-os.com/appnotes

KW C3L5L2.TK 22 Version 1.2 | 2021-09-01 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product and functional safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. OSRAM OS products are not qualified at module and system level for such application. In case buyer – or customer supplied by buyer – considers using OSRAM OS components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and buyer and /or customer will analyze and coordi- nate the customer-specific request between OSRAM OS and buyer and/or customer.

KW C3L5L2.TK 23 Version 1.2 | 2021-09-01 Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 1 ms, with an internal reproducibility of ±8 % and an expanded uncertainty of ±11 % (acc. to GUM with a coverage factor of k = 3). 2) Operating Temperature: The Operating Temperatur Top is referenced to the Solderpoint Ts of this de- vice. Proper current derating must be observed to maintain junction temperature below the maximum. 3) Reverse Operation: This product is intended to be operated applying a forward current within the specified range. Applying any continuous reverse bias or forward bias below the voltage range of light emission shall be avoided because it may cause migration which can change the electro-optical char- acteristics or damage the LED. 4) Chromaticity coordinate groups: Chromaticity coordinates are measured during a current pulse of typically 1 ms, with an internal reproducibility of ±0.005 and an expanded uncertainty of ±0.01 (acc. to GUM with a coverage factor of k = 3). 5) Forward Voltage: The forward voltage is measured during a current pulse of typically 1 ms, with an internal reproducibility of ±0.05 V and an expanded uncertainty of ±0.1 V (acc. to GUM with a coverage factor of k = 3). 6) Thermal Resistance: Rth max is based on statistic values (6σ). 7) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic- es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif- fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 8) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differ- ences between single devices within one packing unit. 9) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm. 10) Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.

KW C3L5L2.TK 24 Version 1.2 | 2021-09-01

Revision History

1.0 2021-01-27 Initial Version 1.1 2021-06-18 Description 1.2 2021-09-01 Characteristics Electro - Optical Characteristics (Diagrams)

KW C3L5L2.TK 25 Version 1.2 | 2021-09-01 Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.