KSSG33J12Y KINGSTATE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

SPECIFICATION FOR APPROVAL 承 認 書

Description

Kingstate Part No. KSSG33J12Y Customer’s Model No. Specification No. TK R 907 Number Of The Edition CUSTOMER’ S APPROVED SIGNATURE 志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP. A ddress : 10F, No. 69 International sales dept.: TEL : 886 2809

5651 FAX:886

Domestic sales dept.: TEL : 886 2809

0668 FAX:886

http : //www.kingstate.com.tw Approved by Checked by Issued by Lichee

志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP KSSG33J12Y SCOPE 範疇 This specification applies magnetic buzze r KSSG33J12Y 此規格書適用於電磁式蜂鳴器 KSSG33J12Y SPECIFICATION 規格 No. Item Unit Specification Condition Rated Vo 額定電壓 Vo p Vo p Operating Volt. 操作電壓 Vo p Mean Current 平均耗電流 mA Max 110 Applying rated voltage, 4000 Hz square wave, 1/2duty 施以 額定電壓 400 0Hz 方波 , 50% 負載 Coil Resistance 直流阻抗 Ω Soun d Output 輸出音壓 dBA Min. Distance at cm weight). Appl ying rated voltage 400 0Hz,square wave, 1/2duty 在 cm 處 施以 額定電壓 4000 Hz 方波 , 50% 負載 Rated Frequency 額定頻率 Hz 4000 Operating Temp. 操作溫度 Storage Temp. 儲存溫度 ~ + Dimension 尺寸 mm L x W x H 2.0 See attached drawing. 請參照外觀尺寸圖 Weight 重量 gram Material 材質 L.C.P ( Black Terminal 端子 SMD type 鍍 全 錫 Plating Sn See attached drawing. 請參照外觀尺寸圖 Environmental Protection Regulation 環保法規 ROHS 2.0 Storage life 保存期限 month 6 months preservation at room temp. (25 Humidity40% 在室溫下 濕度 40% 以下可保存 個月

志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP KSSG33J12Y TYPICAL FREQUENCY RESPONSE CURVE 頻率響應曲線 20K 200 Hz dB A: Frequency Response. Magn dB re 20.00uPA D . APPEARANCE DRAWING 外觀尺寸圖 黑色噴碼印字 XX X WEEK YEAR SOUND PORT T ol: ± 0.5 Unit: mm

志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP KSSG33J12Y E. MEASUREMENT METHOD 測量方式 F MECHANICAL CHARACTERISTICS 機械特性 No Item Test condition Evaluation standard Solderability 焊錫附著性 Lead terminals are immersed in solder bath of + ±5 for 3±1 second. 端子置於錫膏內 錫膏溫度 :+2 0±5 . 焊接時間 : 3±1 秒 95% surface of lead pads must be covered with fresh solder 錫膏須覆蓋端子上方 95% Soldering Heat Resistance 焊錫耐熱性 The product is followed the reflow temperature curve to test its reflow thermostability. 產品依照迴焊溫度曲線測試迴焊耐熱性 No interference in operation 操作上無任何不良 Terminal Mechanical Strength 端子強度 L ead pads shall be soldered on the pc board, and the force 9.8N .0kg ) shall be applied behind the part for 10 seconds. 將端子焊在 PC 板上後 對單體施以 9.8N(1.0kg) 拉力 秒 No damage and cutting off 端子不鬆動 不脫落 Vibration 振動 測試 Buzzer shall be measured after being applied vibration of amplitude of 1.5mm with 10 to 55hz band of vibration frequency to each of 3 per pendicular directions for hours. 振動週波數 55HZ 全振幅 1.5mm 於 X.Y .Z 3 個方向 各 小 時 After the test the part shall meet specifications with out any damage in appearance and t he SPL should be in 0dB A compared with initial one. 經測試後 單體除音壓外 外 觀及電氣特性須符合規格 輸出音壓變化量須 dB A 內 Drop test 落下測試 The part only shall be dropped from a height of 75cm onto a 40mm thick wooden board 3 times in 3 axes (X.Y .Z). (a total of 9 times). 單體從 公分高處 X.Y . 個方向 各 回 落於 mm 厚木板上

志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP KSSG33J12Y G . ENVIRONMENT TEST 環境測試 No. Item Test condition Evaluation standard High temp. test 高溫測試 After being placed in a chamber at + for hours 置於 環境中 小時 After the test the part shall meet specifications with out any de gradation in appearance and performance except SPL. after hours at +2 t he SPL should be in 0dB A compared with initial one. 經測試後 靜置於 室溫 環境中 小時後 單體除音壓外 外觀及電 氣特性須符合規格 輸出 音壓變化量須在 dB A 內 Low temp. test 低溫測試 After being placed in a chamber at for hours. 置於 環境中 小時 Thermal Shock 熱衝擊試驗 The part shall be subjected to 10 cycles. One cycle shall consist of; 對單體施以熱衝擊試驗 次循環 其循環內容如圖示 min. 30 min. 60 m in. T e m p./ Humidity C ycle 溫度 溼度循環測試 The part shall be subjected to 10 cycles. One cycle shall be 24 hours and consist of; 單體承受溫度 溼度循環測試 次 其循環內容如圖示 a,b : 90~98%RH c : 80~98%RH a b +25 3hrs 12±0.5hrs 3hrs c 24hours H . RELIABILITY TEST 信賴性 測試 No. Item Test condition Evaluatio n standard Operating life test 壽命測試 1.Continuous life test 高溫壽命測試 連續 The part shall be subjected to hours at + with V 4000 Hz applied 在 環境下 輸入 V 4000 Hz 連續操作 小時 .Intermittent life test 室溫壽命測試 間歇 A duty cycle of 1 minute on, minut es off, a minimum of 10000 times at room temp.( +2 with V 4000 Hz applied. 在室溫下 輸入 V 4000 Hz 通電 分鐘 斷電 分鐘 測試 10000 次循環 After the test the part shall meet specifications with out any degradation in appearance and performance except SPL. after hours at +2 t he SPL should be in 0dB A compared with initial one. 經測試後 靜置於 室溫 環境中 小時後 單體除音壓外 外觀及電氣 特性須符合規格 輸出音 壓變化量須在 dB 內 TEST CONDITION. Standard Test Condition a) Temperature ~ + b) Humidity 85% c) Pressure 860 1060mbar 一般測試條件 溫度 ~ + 濕度 : 45 85% 氣壓 860 1060mbar Judgment Test Condition Temperature Humidity : 60 70% c) Pressure 860 1060mbar 爭議時測試條件 溫度 濕度 70% 氣壓 1060mbar

志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP KSSG33J12Y I Recommended Temperature Profile For Reflow Oven 建議迴焊爐溫度曲線 Tim e [sec] Peak Tem p 217°C 260°C 溫 度 60~180sec 60~150sec SM T Reflow Tem perature Profile (Pb_Free) 255°C 20~40 sec 150°C 200°C *Reflow can’t over 1 time. 迴流焊次数不超過 次 J . Recommended land pattern 建議基板設計尺寸圖

志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP KSSG33J12Y K . PACKING STANDARD 包裝 規格 通孔 Lot No. Part No. Quantity Pcs Date: XXXXXXXXXX XXXX * T he label sticked on inner boxes and the outer of carton XXXXXXXXXX KINGSTATE ELECTRONICS CORP. WWYY HSF