KPSM5500-5V KINGSTATE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
SPECIFICATION FOR APPROVAL 承 認 書 Description : Piezo Siren Kingstate Part No. : KPSM5500-5V Customer’s Model No. : Specification No. : DOD-3400 Number Of The Edition : 1.3 CUSTOMER’S APPROVED SIGNATURE 志豐電子股份有限公司KINGSTATE ELECTRONICS CORP . International sales dept.: TEL:886-2-2809-5651 FAX:886-2-2809-7151 Domestic sales dept.: TEL:886-2-2809-0668 FAX:886-2-28096748 http://www.kingstate.com.tw Approved by Checked by Issued by
志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 2/7 KPSM5500-5V SPEC SHEET REVISION RECORD 成品承認書修訂記錄 DRAWING NO.:DOD-3400 圖 號:DOD-3400 P/N: KPSM5500-5V 料 號: KPSM5500-5V REVISE DATE 修訂日期 APPLICANT 提出者 Version 版次 Revise 修訂記錄內容 2022/7/6 Sean 1.1 1. 製作規格書 (Create specification) 2023/2/14 Sean 1.2 1. 修改音壓、耗電流、尺寸、重量 (Modify SPL, current consumption, dimension, weight) 2. 修改外觀尺寸圖 (Modify appearance drawing) 2023/5/26 Sean 1.3 1. 修改尺寸 (Modify Dimension) 2. 修改外觀尺寸圖 (Modify appearance drawing) .加入產品包裝圖 (Add packing drawing)
志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 3/7 KPSM5500-5V A. SCOPE 範疇 This specification applies piezo indicator, KPSM5500-5V 此規格書適用於壓電式蜂鳴器, KPSM5500-5V B. SPECIFICATION 規格 No. Item Unit Specification Condition
1 Operating Frequency
操作頻率 KHz 2.3 ~ 3.1
2 Operating Volt
操作電壓 VDC 3.3 ~ 5.5
3 Rated Voltage
額定電壓 VDC 5
4 Tone
聲音 Siren
5 Sound pressure level
輸出音壓 dB MIN 105 At 30 cm/ 5VDC Averaging type: Liner (5sec) In Full-Anechoic Chamber Min 95 At 100 cm/ 5VDC Averaging type: Liner (5sec) In Full-Anechoic Chamber
6 Current consumption
消耗電流 mA Max 120 Measure by Chroma 62015L-60-6 at 5VDC 7 Operating temp. 操作溫度 ℃ -40 ~ +85 8 Storage temp. 儲存溫度 ℃ -40 ~ +85
9 Dimension
尺寸 mm φ55.0 x H25.3 See appearance drawing 請參照外觀尺寸圖
10 Weight (MAX)
重量 gram 28
11 Material
材質 PBT+30%Glass UL-94V0 （BLACK）
12 Terminal
端子 Wire type Environmental Protection Regulation 環保法規 RoHS 2.0 Piezo electronic device is exempted from RoHS2.0. Lead contain restriction (escape clause 7C-1). 產品符合RoHS2.0, 但陶瓷面含鉛部分, 屬RoHS豁免條款7C-1. Dustproof and waterproof level 防塵、防水等級 IP67 IEC standard 529 edition 2.0(1989) IEC 標準 529 第二版(1989) Core: D-C2
志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 4/7 KPSM5500-5V C. APPEARANCE DRAWING 外觀尺寸圖 KPSM5500-5V KINGSTATE 0122 Week Year Date code (Laser printed) ( 鐳射印字 ) YYWW D. MEASURING METHOD 測量方法 1. S.P.L. Measuring Circuit 音壓測試接線圖 Mic : RION S.P.L. meter UC30 or equivalent Mic : RION 噪音計 UC30 或同等品
志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 5/7 KPSM5500-5V E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION CHARACTERISTICS 電壓與音壓/電壓與耗電流之特性 F. MECHANICAL CHARACTERISTICS 機械特性 No. Item Test Condition Evaluation standard
1 Solderability
焊錫附著性 Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of +270±5℃ for 3±1 seconds. 端子部份浸入松香溶液5 秒後,再浸入+270±5℃溶融焊鍚槽中3±1 秒. 90% min. lead terminals shall be wet with solder. (Except the edge of terminal) 浸入端子部份附著焊鍚90%以 上.(末端斷面不算) Soldering Heat Resistance 焊錫耐熱性 Lead terminal are immersed up to 1.5mm from sounder’s body in solder bath of +300±5℃ for 3± 0.5 seconds or +260±5℃ for 10±1 seconds. 距離端子根部1.5mm的位置,浸入+300±5℃的焊鍚槽3±0.5秒, 或+260±5℃ 的焊錫槽10±1 秒. No interference in operation 操作上無任何不良. Terminal Mechanical Strength 端子強度 The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in axial direction. 各端子的軸方向施以9.8N (1.0kg)的力量10秒. No damage and cutting off 端子不鬆動, 不脫落.
4 Vibration
振動試驗 Buzzer shall be measured after being applied vibration of amplitude of 1.5mm with 10 to 55hz band of vibration frequency to each of 3 per-pedicular directions for 2 hours. 振動週波數10～55HZ、全振幅1.5mm於 X.Y.Z 3個方向,各2 小時. The value of oscillation frequency/ current consumption should be in 10% compared with initial ones .The SPL should be in ± 10dB compared with initial one. 諧振頻率與消耗電流變化量須在 ±10%內. 輸出音壓變化量須在 ±10dB內.
5 Drop test
落下測試 The part only shall be dropped from a height of 75cm onto a 40mm thick wooden board 3 times in 3 axes (X.Y .Z). (a total of 9 times). 單體從75公分高處, X.Y .Z.3 個方向,各3 回,落於40mm厚木板上.
志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 6/7 KPSM5500-5V G. ENVIRONMENT TEST 環境測試 No. Item Test Condition Evaluation standard 1 High temp. test 高溫測試 After being placed in a chamber at +85℃ for 240 hours 置於+85℃環境中240小時 Being placed for 4 hours at +25℃, buzzer shall be measured. The value of oscillation frequency/ current consumption should be in ±10% compared with initial ones .The SPL should be in ±10dB compared with initial one. 經測試後, 靜置於+25℃（室溫） 環境中4 小時後,諧振頻率與消耗 電流變化量須在±10%內. 輸出音 壓變化量須在±10dB內. 2 Low temp. test 低溫測試 After being placed in a chamber at –40℃ for 240 hours 置於-40℃環境中240小時
3 Humidity test
相對濕度測試 After being placed in a chamber at +40℃ and 60±5% relative humidity for 240 hours 置於+40℃, 相對濕度 60±5% 環境中240小時 4 Temp. cycle test 溫度循環試驗 The part shall be subjected to 5 cycles. One cycle shall be consist of:: 單體承受溫度循環測試5 次,其循環內容如圖示: +85℃ +25℃ +25℃ -40℃ 3hours H. RELIABILITY TEST 信賴性測試 No. Item Test condition Evaluation standard Operating life test 壽命測試 1.Continuous life test高溫壽命測試(連續) 48 hours continuous operation at +55℃ with rated voltage applied. 在+55℃環境下,以額定電壓連續操作48小時 2.Intermittent life test 室溫壽命測試(間歇) A duty cycle of 1 minute on, 1 minutes off, a minimum of 5000 times at room temp.( +25±2℃)and rated voltage applied 在室溫下(+25±2℃), 以額定電壓操作, 通電1 分鐘/斷電1 分鐘,測試 5000次循環. Being placed for 4 hours at +25℃, buzzer shall be measured. The value of oscillation frequency/ current consumption should be in ±10% compared with initial ones .The SPL should be in ±10dB compared with initial one. 經測試後, 靜置於+25℃（室溫） 環境中4 小時後,諧振頻率與消耗 電流變化量須在±10%內. 輸出音 壓變化量須在±10dB內. TEST CONDITION. Standard Test Condition : a) Temperature : +5 ~ +35℃ b) Humidity : 45-70% c) Pressure : 860-1060mbar 一般測試條件 : a) 溫度 : +5 ~ +35℃ b) 濕度 : 45-70% c) 氣壓 : 860-1060mbar Judgement Test Condition : a) Temperature : +25 ± 2℃ b) Humidity : 60-70% c) Pressure : 860-1060mbar 爭議時測試條件 : a) 溫度 : +25 ± 2℃ b) 濕度 : 60-70% c) 氣壓 : 860-1060mbar
志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 7/7 KPSM5500-5V I.PACKING STANDARD 包裝規格 Each minimum package unit of products shall be in a carton box and it shall be clearly marked with Part Number, quantity and outgoing inspection number. There shall be no mechanical damage on products during transportation and/or in storage. 外箱須標示最小包裝單位, 並註明產品型號、數量及檢驗批號.,必須是物品儲藏或運輸過程中可 防止造成損傷的包裝. Carton Box 20PCSx10=200PCS 1x20PCS=20PCS 330mm Out Box Carton Box 550mmx330mmx290mm 310mmx248mmx49mm 550mm 290mm (10PCS Out Box) Out Box Out Box 5PCSx4=20PCS (1LAYER =20PCS)