KBJ8A YEASHIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

http://www.yeashin.com 1 REV.02 20120305 KBJ8A THRU KBJ8M TECHNICAL SPECIFCATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE – 50 to 1000 Volts CURRENT – 8.0 Amperes

FEATURES

‧Ideal for printed circuit board ‧Surge overload rating: 170 Amperes peak ‧High temperature soldering : 260 O C / 10 seconds at terminals ‧Pb free product at available : 99% Sn above meet RoHS environment substance directive request MECHANICAL DATA ‧Case：Molded plastic ‧Epoxy：UL 94-V-0 rate flame reardant ‧Terminal：MIL-STD-202E,Method 208 guaranteed ‧Polarity：Symbols molded or marked on body ‧Mounting position：Any ‧Weight：4.6 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS KBJ Dim Min Max A 24.80 25.20 B 14.70 15.30 C 400 Nominal D 17.20 17.80 E 0.90 1.10 G 7.30 7.70 H 3.10ψ 3.40ψ J 3.30 3.70 K 1.90 2.10 L 9.30 9.70 M 2.50 2.90 N 3.40 3.80 P 4.40 4.80 R 0.60 0.80 All Dimensions in mm Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL KBJ8A KBJ8B KBJ8D KBJ8G KBJ8J KBJ8K KBJ8M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge lnput Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Output Current at Tc=100℃ Io 8.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 170 Amps Maximum Forward Voltage Drop per element at 4.0A DC VF 1.0 Volts @TA=25℃ 10 Maximum DC Reverse Current at Rated DC Blocking Voltage per element @TA=100℃ IR 500 uAmps I2t Rating for Fusing (t<8.3ms) I2t 127 A2Sec Typical Junction Capacitance (Note 1) CJ 40 PF Typical Junction Capacitance (Note 2) RθJA 8.6 ℃/W Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ NOTES： 1.Measured at 1 MHz and applied reverse voltage of 4.0 volts 2.Thermal Resistance from Junction to Case per element Unit mounted on 300x300x1.6mm Aluminum plate heat-sinks. A B D JK C E G H L M N P R KBJ(mm)

http://www.yeashin.com 2 REV.02 20120305 KBJ8A THRU KBJ8M DEVICE CHARACTERISTICS