2312T SYSTEMSENSOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
} } | | ‘Smoke Detector / : » feat Sensin uy a jh” ey 1 a System Sensor’s new 2300 Series Photoelectronic > One Unit Features Both 12 and Smoke Detector with Electronic Heat Sensing 24 VDC Operation features 12 and 24 volt operation in one unit. —» 2-Wire and 4-Wire Models Available eh Model 2300T (2-Wire) and Model 2312/24T (4-Wire) 4 . ‘i are designed with pleasing aesthetics; the housing < fee Bless ngi Lowi bratile is 15% smaller than many competitive units. > Geometrically Optimized Thermistor technology coupled with System Photoelectronic Sensing Chamber Sensor’s patented optical chamber make this new — Built-in Signal Processing series detector exceptionally reliable. Installation — Superior Signal-to-Noise Ratio is simple and cost effective — pre-wire the — 3% Nominal Sensitivity harnesses and snap the detectors into place. SoTernistor HesbSensors > Wiring Harness for Easy Pre-wire of Units — Cost Effective — Helps Prevent Construction Damage/Theft > Visual Alarm and Power Indicator > Built-in Test Switch > Field Metering of Detector Sensitivity =SYSTEM SENSOR = > Easy Maintenance — Replaceable SS 4 DIVISION OF PITTWAY ——— Insecuscieen) SO > Built-in Tamper-resistant Feature 3825 Ohio Avenue + St. Charles, Illinois 60174 * 708-377-6363 + FAX: 708-377-6495 In Canada: 416-675-1695 + FAX: 416-675-7078 > 3-Year Warranty F 4 ‘ pl: = UL as approved — MADEINTHE USA.
sg: gs . P General Specifications 4h en Diameter: 5.5 inches (13.9 cm) oe | a. His PAA Bl | Height: 2.5 inches (6.4 cm) I 11 ie Weight: 07 Ib (310 gm) Le 1 Vt Operating Temperate Range: 0°to+49°C (32° to 120°F) ii ci ! | Operating Humidity Range: 10% to 90% Relative Humidity ty Latching Alarm: Reset by momentary Sumner | L_] im power interruption. tt Test Feature: Insert 0.1 inch maximum diameter Wt allen wrench or screwdriver into it test hole on detector housing. | Maximum Air Velocity: 3000 Ft/Min. (15 Meters/Sec.) * * it Caution — Detectors subjected to continuous velocities above ia 300 fpm may require more frequent maintenance. a yt Sensitivity: 3% (+.3/-.7) ‘OPTIONAL STYLED (CLASS A) WIRING { Spacing: Install per NFPA 72E, NFPA 74, RAGS een raion Hane wh emia iat and local requirements, BEES SAMS et aetng sah Torsten See Listings: UL $911; CSFM 7257-1209:142; ; MEA 427-91.E; FM Approved PP wirinc DIAGRAM FOR 2300T DETECTOR Electrical Ratings: 2312/24T 2300T System Voltage nominal: 12 or 24 VDC 12 or 24 VDC minimum: 8.5 VDC 8.5 VDC maximum: 35 VDC 35 VDC Maximum Ripple Voltage: 30% of nom. (peak to peak) 30% of nom. (peak to peak) Start-up Capacitance: 0.02 pF Maximum 0.02 uF Maximum Standby Current: 120 WA Maximum 120 yA Maximum Alarm Current: 10mA Minimum, 50mA Maximum. 4.2 VDC Minimum at 10 mA.* 6.6 VDC Maximum at 100 mA.* *Alarm current must be limited to 100 mA maximum by the control panel. If used, the RA400Z Remote Annunciator operates within the specified detector alarm currents. Reset Voltage: 0.8 VDC Minimum 2.5 VDC Minimum Reset Time: 6 Sec. Maximum 6 Sec. Maximum Start-up Time: 34 Sec. Maximum 34 Sec. Maximum (After 60 Sec. Reset) (After 60 Sec. Reset) EOL relay: A77-716-01 (12 volt) ( a A77-716-02 (24 volt) 4 " as aa riya Relay Contact Ratings (2312/24T only): olen |__ ff A AAT | Resistive or inductive load (60% power factor): a 1 = it: (i | hen Form A: — 2.0A @ 30 VACIDC SRAREron >< FH ARAGNBaron p> LI son Form C:* 0.6A @ 110 VDC, 2.0A @ 30 VAC/DC fT ieee 1.0A @ 125 VAC, 2.0 @ 30 VACDC wgurrep with . *For Canadian installations, relay contact rating ae ti (etn @ Saneany is 2.08 @ 30 VACDC LS Na 3 leo! | | — | eae HI it i | i |; en 1 i Se Peer a ae TT" eta: Dupo colored wies on connector (part ¥P&7 706 00) ara shored whan connected to he delocior —A7B.1981.01 Ord z | ’ ™ PP) wirine DiaRam FoR 2312/24T DETECTOR PartNo. Description (2312/24T Photoelectronic, 4-Wire, 12 or 24 VDC, Thermistors, Molex Connector 2300T Photoelectronic, 2-Wire, 12 or 24 VDC, 5 eo " Thermistors, Molex Connector Distributed by: A77-716-01 Relay Module, 12 VDC (24 Pack) A77-716-02 Relay Module, 24 VDC (24 Pack) MOD400R Test Module for 300 and 400 Series Detectors RS23 Replacement Screen for 300 Series Smoke Detectors (12 Pack)
42300 Shorting Plug for 300 Series Head Removal ~
T2300 Replacement Thermistors for 300 Series (2 Pack) \\ ~ P87-206-00 Replacement 4-Wire Molex Connector for 2312/24T ind P87-206-01 Replacement 2-Wire Molex Connector for 2300T 156-490-XX Installation Instructions for 2300T 156-431-XX Installation Instructions for 2312/24T © Copyright 2/92 System Sensor This document is not intended to be used for installation purposes. 2300