EDS1093-002 EUROPA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1093-002 Page 1 of 1 EUR PA Part Number Amps Colour and Voltage Poles Protection Degree a (mm) b (mm) c (mm) sw(mm) Cable Nominal Cross Section Area IP163F 16A Y ellow 110V 2P + E IP44 116 55 6-15 38 1 - 2.5 IP323F 32A 145 72 10-20 50 2.5 - 6 IP163F - IP323F IP44 Industrial Plugs 110V 16-32A 2P + E