IL261V

IL700V NVE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 15

Technical content

Features

• 5000 VRMS/7072 VPK isolation voltage (1 minute; per UL1577)
• 1000 VRMS/1415VPK working voltage (VIORM) under VDE 0884-10
• 10 kVRMS surge voltage under VDE 0884-10
• High temperature: −40°C to +125°C
• 50 kV/μs typ.; 30 kV/μs min. common mode transient immunity
• No carrier or clock for low EMI emissions and susceptibility
• 1.2 mA/channel typical quiescent current
• 100 ps max. pulse jitter
• 2 ns channel-to-channel skew
• 10 ns typical propagation delay
• 44000 year barrier life
• Excellent magnetic immunity
• UL 1577 recognized; VDE 0884-10 pending
• True 8 mm creepage package

Applications

• Board-to-board communication
• CANbus
• Peripheral interfaces
• Logic level shifting
• Equipment covered under IEC 61010-1 Edition 3
• 5 kVRMS rated IEC 60601-1 medical applications

Description

NVE’s IL200V/IL700V family of high isolation voltage digital isolators are CMOS devices manufactured with NVE’s patented* IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. IL200/IL700 isolators are inherently low in EMI emissions with no carrier or clocks. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The parts use NVE’s unique JEDEC-compliant 16-pin package with True 8 mm creepage under IEC 60601. 8.3 mm

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation Absolute Maximum Ratings Parameters Symbol Min. Typ. Max. Units Test Conditions Storage Temperature TS −55 150 °C Junction Temperature TJ −55 150 °C Ambient Operating Temperature(1) TA −40 125 °C Supply Voltage VDD1, VDD2 −0.5 7 V Input Voltage VI −0.5 V DD + 0.5 V Output Voltage VO −0.5 V DD + 0.5 V Output Current Drive IO 10 mA Lead Solder Temperature 260 °C 10 sec. ESD 2 kV HBM Recommended Operating Conditions Parameters Symbol Min. Typ. Max. Units Test Conditions Ambient Operating Temperature TA −40 125 °C Junction Temperature TJ −40 125 °C Supply Voltage VDD1, VDD2 3.0 5.5 V Logic High Input Voltage VIH 2.4 V DD V Logic Low Input Voltage VIL 0 0.8 V Input Signal Rise and Fall Times tIR, tIF 1 μs Insulation Specifications Parameters Symbol Min. Typ. Max. Units Test Conditions Creepage Distance (external) 8.03 8.3 mm Per IEC 60601 Total Barrier Thickness (internal) 0.013 0.014 mm Leakage Current(5) 0.2 μA 240 V RMS, 60 Hz Barrier Resistance(5) R IO >10 14 Ω 500 V Barrier Capacitance(5) C IO 2 pF f = 1 MHz Comparative Tracking Index CTI ≥175 V Per IEC 60112 High Voltage Endurance (Maximum Barrier Voltage for Indefinite Life) AC DC VIO 1000 1500 VRMS VDC At maximum operating temperature Barrier Life 44000 Years 100°C, 1000 VRMS, 60% CL activation energy Thermal Characteristics (0.3" True 8 SOIC) Parameter Symbol Min. Typ. Max. Units Test Conditions Junction–Ambient Thermal Resistance θJA 60 °C/W Soldered to double- sided board; free air Junction–Case (Top) Thermal Resistance ΨJT 20 °C/W Power Dissipation PD 800 mW

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation Safety and Approvals VDE 0884-10 (File Number 5016933-4880-0001; currently certified 600 VRMS Working V oltage; 1000VRMS pending)

• Working V oltage (VIORM) 1000 VRMS (1415 VPK); basic insulation; pollution degree 2
• Transient overvoltage (VIOTM) 6000 VPK
• Surge voltage (VIOSM) 10 kVPK
• Each part tested at 2387 VPK for 1 second, 5 pC partial discharge limit
• Samples tested at 6000 VPK for 60 sec.; then 2122 VPK for 10 sec. with 5 pC partial discharge limit IEC 61010-1 (Edition 2; TUV Certificate Numbers N1502812; N1502812-101) Reinforced Insulation; Pollution Degree II; Material Group III Package Working Voltage Wide-body SOIC/True 8™ 300 V RMS UL 1577 (Component Recognition Program File Number E207481) 5000 V RMS/7072 VPK isolation voltage Each part tested at 6000 VRMS (8486 VPK) for 1 second; each lot sample tested at 5000 VRMS (7072 VPK) for 1 minute IEC 60601-1 IEC 60601 specifies isolator creepage for medical safety, and is also used for demanding non-medical applications. With 5000 V isolation and true 8 millimeter creepage, V-Series Isolators allow IEC 60601-1 compliance for 120V and 220/240V applications. Compliance is follows: Insulation Single 3.0 4.0 Double 6.0 8.0 Single 2000 2500 Double 3000 4000 Creepage (mm) Dielectric strength Working V oltage (VRMS) 125 250 Soldering Profile Per JEDEC J-STD-020C, MSL 1

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation IL711V Pin Connections

2 GND1 Ground return for VDD1

(pins 1, 2, 7, and 8 internally connected)

3 V DD1 Supply voltage

4 IN 1 Data in, channel 1

5 IN 2 Data in, channel 2

6 NC No connection

8 GND1 Ground return for VDD1

(pins 1, 2, 7, and 8 internally connected)

10 GND2 Ground return for VDD2

(pins 9, 10, 15, and 16 internally connected)

11 NC No connection

12 OUT 2 Data out, channel 2

13 OUT 1 Data out, channel 1

14 V DD2 Supply voltage

16 GND

2 Ground return for VDD2

(pins 9, 10, 15, and 16 internally connected) IN1 VDD2 GND1 NC GND2 GND2 IN2 OUT2 OUT1 GND1 VDD1 GND2GND1 GND2 NC GND1 IL711V IL721V Pin Connections (pins 1, 2, 7, and 8 internally connected)

4 OUT 1 Data out, channel 1

(pins 1, 2, 7, and 8 internally connected) (pins 9, 10, 15, and 16 internally connected)

13 IN 1 Data in, channel 1

(pins 9, 10, 15, and 16 internally connected) OUT1 VDD2 GND1 NC GND2 GND2 IN2 OUT2 IN1 GND1 VDD1 GND2GND1 GND2 NC GND1 IL721V IL715V Pin Connections

1 V DD1 Supply voltage

2 GND 1 Ground return for V DD1*

3 IN 1 Data in, channel 1

4 IN 2 Data in, channel 2

5 IN 3 Data in, channel 3

6 IN 4 Data in, channel 4

7 NC No connection

8 GND 1 Ground return for V DD1*

9 GND 2 Ground return for V DD2*

10 NC No connection

11 OUT 4 Data out, channel 4

12 OUT 3 Data out, channel 3

13 OUT 2 Data out, channel 2

14 OUT 1 Data out, channel 1

15 GND 2 Ground return for V DD2*

16 V DD2 Supply voltage

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation IL716V Pin Connections

5 OUT 3 Data out, channel 3

6 OUT 4 Data out, channel 4

11 IN 4 Data in, channel 4

12 IN 3 Data in, channel 3

*NOTE: Pins 2 and 8 are internally connected, as are pins 9 and 15. IL717V Pin Connections *NOTE: Pins 2 and 8 are internally connected, as are pins 9 and 15. VDD1 GND1 GND2 OUT2 OUT3 OUT1IN1 IN2 IN3 VDD2 IN4 NC NC OUT4 GND1 GND2 IL717V

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation IL260V Pin Connections

1 IN 1 Input 1

2 GND 1 Ground*

3 IN 2 Input 2

4 IN 3 Input 3

5 IN 4 Input 4

6 V DD1 Supply Voltage 1

7 IN 5 Input 5

8 GND 1 Ground*

9 GND 2 Ground*

10 OUT 5 Output 5

11 OUT 4 Output 4

12 OUT 3 Output 3

13 OUT 2 Output 2

14 OUT 1 Output 1

15 GND 2 Ground*

16 V DD2 Supply Voltage 2

1 V DD1 Supply Voltage 1

3 IN 1 Input 1

4 IN 2 Input 2

5 IN 3 Input 3

6 IN 4 Input 4

7 OUT 5 Output 5

10 IN 5 Input 5

6 OUT 4 Output 4

11 IN 4 Input 4

*NOTE: Pins 2 and 8 are internally connected, as are pins 9 and 15.

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation

3.3 Volt Electrical Specifications (Tmin to Tmax unless otherwise stated)

Parameters Symbol Min. Typ. Max. Units Test Conditions Input Quiescent Supply Current IL260V IDD1 300 400 μA IL261V 1.2 1.75 mA IL262V 2.4 3.5 mA IL711V 8 10 μA IL721V 1.2 1.75 mA IL715V 16 20 μA IL716V 2.4 3.5 mA IL717V 1.2 1.75 mA Output Quiescent Supply Current IL260V IDD2 6 8.75 mA IL261V 4.8 7 mA IL262V 4.8 7 mA IL711V 2.4 3.5 mA IL721V 1.2 1.75 mA IL715V 4.8 7 mA IL716V 2.4 3.5 mA IL717V 3.6 5.25 mA Logic Input Current II −10 10 μA Logic High Output Voltage VOH VDD – 0.1 V DD V IO = −20 μA, VI = VIH 0.8 x VDD 0.9 x V DD I O = −4 mA, VI = VIH Logic Low Output Voltage VOL 0 0.1 V IO = 20 μA, VI = VIL 0.5 0.8 I O = 4 mA, VI = VIL Switching Specifications (VDD = 3.3 V) Maximum Data Rate 100 110 Mbps C L = 15 pF Pulse Width(7) PW 10 7.5 ns 50% Points, V O Propagation Delay Input to Output (High to Low) tPHL 12 18 ns C L = 15 pF Propagation Delay Input to Output (Low to High) tPLH 12 18 ns C L = 15 pF Pulse Width Distortion(2) PWD 2 3 ns C L = 15 pF Propagation Delay Skew(3) t PSK 4 6 ns C L = 15 pF Output Rise Time (10%–90%) tR 2 4 ns C L = 15 pF Output Fall Time (10%–90%) tF 2 4 ns C L = 15 pF Common Mode Transient Immunity (Output Logic High or Logic Low)(4) |CMH|,|CML| 30 50 kV/ μs VCM = 1500 VDC tTRANSIENT = 25 ns Channel-to-Channel Skew tCSK 2 3 ns C L = 15 pF Dynamic Power Consumption(6) 140 240 μA/Mbps per channel Magnetic Field Immunity(8) (VDD2= 3V, 3V<VDD1<5.5V) Power Frequency Magnetic Immunity H PF 1000 1500 A/m 50Hz/60Hz Pulse Magnetic Field Immunity HPM 1800 2000 A/m t p = 8µs Damped Oscillatory Magnetic Field H OSC 1800 2000 A/m 0.1Hz – 1MHz Cross-axis Immunity Multiplier(9) K X 2.5

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation

5 Volt Electrical Specifications (Tmin to Tmax unless otherwise stated)

Parameters Symbol Min. Typ. Max. Units Test Conditions Input Quiescent Supply Current IL260V IDD1 350 500 μA IL261V 1.8 2.5 mA IL262V 3.6 5 mA IL711V 10 15 μA IL721V 1.8 2.5 mA IL715V 20 15 μA IL716V 3.6 5 mA IL717V 1.8 2.5 mA Output Quiescent Supply Current IL260V IDD2 9 12.5 mA IL261V 7.2 10 mA IL262V 7.2 10 mA IL711V 3.6 5 mA IL721V 1.8 2.5 mA IL715V 3.6 5 mA IL716V 3.6 5 mA IL717V 5.4 7.5 mA Logic Input Current II −10 10 μA Logic High Output Voltage VOH VDD − 0.1 V DD V IO = −20 μA, VI = VIH 0.8 x VDD 0.9 x V DD I O = −4 mA, VI = VIH Logic Low Output Voltage VOL 0 0.1 V IO = 20 μA, VI = VIL 0.5 0.8 I O = 4 mA, VI = VIL Switching Specifications (VDD = 5 V) Maximum Data Rate 100 110 Mbps C L = 15 pF Pulse Width(7) PW 10 7.5 ns 50% Points, V O Propagation Delay Input to Output (High to Low) tPHL 10 15 ns C L = 15 pF Propagation Delay Input to Output (Low to High) tPLH 10 15 ns C L = 15 pF Pulse Width Distortion(2) PWD 2 3 ns C L = 15 pF Pulse Jitter(10) t J 100 ps C L = 15 pF Propagation Delay Skew(3) t PSK 4 6 ns C L = 15 pF Output Rise Time (10%–90%) tR 1 3 ns C L = 15 pF Output Fall Time (10%–90%) tF 1 3 ns C L = 15 pF Common Mode Transient Immunity (Output Logic High or Logic Low) (4) |CMH|,|CML| 30 50 kV/ μs VCM = 1500 VDC tTRANSIENT = 25 ns Channel to Channel Skew tCSK 2 3 ns C L = 15 pF Dynamic Power Consumption(6) 200 340 μA/Mbps per channel

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation Magnetic Field Immunity(8) (VDD2= 5V, 3V<VDD1<5.5V) Power Frequency Magnetic Immunity H PF 2800 3500 A/m 50Hz/60Hz Pulse Magnetic Field Immunity HPM 4000 4500 A/m t p = 8µs Damped Oscillatory Magnetic Field H OSC 4000 4500 A/m 0.1Hz – 1MHz Cross-axis Immunity Multiplier(9) K X 2.5 Timing Diagram Legend tPLH Propagation Delay, Low to High tPHL Propagation Delay, High to Low tPW Minimum Pulse Width tR Rise Time tF Fall Time Notes (apply to both 3.3 V and 5 V specifications): 1. Absolute maximum ambient operating temperature means the device will not be damaged if operated under these conditions. It does not guarantee performance. 2. PWD is defined as |tPHL − tPLH|. %PWD is equal to PWD divided by pulse width. 3. tPSK is the magnitude of the worst-case difference in tPHL and/or tPLH between devices at 25°C. 4. CMH is the maximum common mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common mode input voltage that can be sustained while maintaining VO < 0.8 V. The common mode voltage slew rates apply to both rising and falling common mode voltage edges. 5. Device is considered a two terminal device: pins 1–4 shorted and pins 5–8 shorted. 6. Dynamic power consumption is calculated per channel and is supplied by the channel’s input side power supply. 7. Minimum pulse width is the minimum value at which specified PWD is guaranteed. 8. The relevant test and measurement methods are given in the Electromagnetic Compatibility section on p. 6. 9. External magnetic field immunity is improved by this factor if the field direction is “end-to-end” rather than to “pin-to-pin” (see diagram on p. 6). 10. 64k-bit pseudo-random binary signal (PRBS) NRZ bit pattern with no more than five consecutive 1s or 0s; 800 ps transition time.

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation

Application Information

Electrostatic Discharge Sensitivity This product has been tested for electrostatic sensitivity to the limits stated in the specifications. However, NVE recommends that all integrated circuits be handled with appropriate care to avoid damage. Damage caused by inappropriate handling or storage could range from performance degradation to complete failure. Electromagnetic Compatibility IsoLoop Isolators have the lowest EMC footprint of any isolation technology. IsoLoop Isolators’ Wheatstone bridge configuration and differential magnetic field signaling ensure excellent EMC performance against all relevant standards. These isolators are fully compliant with generic EMC standards EN50081, EN50082-1 and the umbrella line-voltage standard for Information Technology Equipment (ITE) EN61000. NVE has completed compliance tests in the categories below: EN50081-1 Residential, Commercial & Light Industrial Methods EN55022, EN55014 EN50082-2: Industrial Environment Methods EN61000-4-2 (ESD), EN61000-4-3 (Electromagnetic Field Immunity), EN61000-4-4 (Electrical Transient Immunity), EN61000-4-6 (RFI Immunity), EN61000-4-8 (Power Frequency Magnetic Field Immunity), EN61000-4-9 (Pulsed Magnetic Field), EN61000-4-10 (Damped Oscillatory Magnetic Field) ENV50204 Radiated Field from Digital Telephones (Immunity Test) Immunity to external magnetic fields is even higher if the field direction is “end-to-end” rather than to “pin-to-pin” as shown in the diagram below: Cross-axis Field Direction Dynamic Power Consumption IsoLoop Isolators achieve their low power consumption from the way they transmit data across the isolation barrier. By detecting the edge transitions of the input logic signal and converting these to narrow current pulses, a magnetic field is created around the GMR Wheatstone bridge. Depending on the direction of the magnetic field, the bridge causes the output comparator to switch following the input logic signal. Since the current pulses are narrow, about 2.5 ns, the power consumption is independent of mark-to-space ratio and solely dependent on frequency. This has obvious advantages over optocouplers, which have power consumption heavily dependent on mark-to-space ratio. Thermal Management IsoLoop Isolators are designed for low power dissipation and thermal performance, providing unmatched channel density for high-performance isolators. Nevertheless, package temperature rise should be considered when running multiple channels at high speed. Power consumption is higher at 5 volt operation than at 3.3 volts, and dynamic supply current is higher on the input side of the isolators than the output side, so thermal management is more important with five-volt input-side power supplies. Based on the specifications contained in this datasheet, the derating curve at typical operating conditions is as follows: Power Supply Decoupling Both power supplies to these devices should be decoupled with low-ESR 47 nF ceramic capacitors. Ground planes for both GND1 and GND2 are highly recommended for data rates above 10 Mbps. Capacitors must be located as close as possible to the VDD pins. Maintaining Creepage Creepage distances are often critical in isolated circuits. In addition to meeting JEDEC standards, NVE isolator packages have unique creepage specifications. Standard pad libraries often extend under the package, compromising creepage and clearance. Similarly, ground planes, if used, should be spaced to avoid compromising clearance. The package drawing and recommended pad layout are included in this datasheet. Signal Status on Start-up and Shut Down To minimize power dissipation, input signals are differentiated and then latched on the output side of the isolation barrier to reconstruct the signal. This could result in an ambiguous output state depending on power up, shutdown and power loss sequencing. Unless the circuit connected to the isolator performs its own power- on reset (POR), a start-up initialization circuit should be considered. Initialization consists of toggling the input either high then low, or low then high. In CAN applications, the IL721V should be used with CAN transceivers with Dominant Timeout functions for seamless POR. Most CAN transceivers have Dominant Timeout options. Examples include NXP’s TJA 1050 and TJA 1040 transceivers

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation True 8™ (8 mm creepage) 16-pin SOIC Package 0.049 (1.24) 0.051 (1.30) 0.017 (0.43)* 0.022 (0.56) 0.292 (7.42)* 0.299 (7.59) 0.007 (0.18)* 0.010 (0.25) 0.260 (6.60)* 0.280 (7.11) 0.033 (0.85)* 0.043 (1.10) 0.007 (0.2) 0.013 (0.3) Pin 1 identified by either an indent or a marked dot 0.08 (2.0) 0.10 (2.5) 0.397 (10.08) 0.413 (10.49) 0.394 (10.00) 0.419 (10.64) 0.092 (2.34) 0.105 (2.67) 0.004 (0.1) 0.012 (0.3) 0.016 (0.4) 0.050 (1.3) NOTE: Pin spacing is a BASIC dimension; tolerances do not accumulate 0.013 (0.3) 0.020 (0.5) Dimensions in inches (mm); scale = approx. 5X *S ifi d f T 8™ k t t 8 IEC 60601 0.050 (1.27) 0.449 (11.40) 0.020 (0.51)

16 PLCS

0.317 (8.05) Dimensions in inches (mm); scale = approx. 5X

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation

Ordering Information

Blank = Tube TR7 = 7'' Tape and Reel TR13 = 13'' Tape and Reel Package E = RoHS Compliant Grade V = High Isolation V oltage and High Temperature Base Part Number 260 = 5 Drive Channels 261 = 4 Drive Channels,

1 Receive Channel

262 = 3 Drive Channels,

2 Receive Channel

711 = 2 Transmit Channels 721 = 1 Transmit Channel 715 = 4 Transmit Channels 716 = 2 Transmit Channels

2 Receive Channels

717 = 3 Transmit Channels IL = Isolators RoHS COMPLIANT

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation ISB-DS-001-IL700V-F August 2014 Changes

• Increase V-Series surge voltage specification to 10 kV.
• Upgraded V-Series safety and approval from IEC 60747-5-5 (VDE 0884) to VDE 0884-10. ISB-DS-001-IL700V-E July 2014 Changes
• Increased working voltage to 1000 V and isolation voltage to 5000 V. ISB-DS-001-IL700V-D March 2014 Changes
• Removed Preliminary status.
• Revised and added details to thermal characteristic specifications (p. 2).
• Moved IEC 60601-1 compliance from “Applications” to “Safety and Approvals.”
• Added “Thermal Management” paragraph in Applications section. ISB-DS-001-IL700V-C November 2013 Changes
• IEC 60747-5-5 (VDE 0884) certification.
• Added IEC 60601 compliance table.
• Upgraded from MSL 2 to MSL 1. ISB-DS-001-IL700V-B September 2013 Changes
• Added five-channel part types (IL260V/IL261V/IL262V).
• UL 1577 recognized. ISB-DS-001-IL700V-A August 2013 Changes
• Added four-channel part types (IL715V/IL716V/IL717V)
• Tightened quiescent current specifications. ISB-DS-001-IL711/21V-PRELIM June 2013 Changes
• Increased transient immunity specifications based on additional data. ISB-DS-001-IL711/21V-PRELIM May 2013 Changes
• Increased transient immunity specifications based on additional data.
• Defined IL711V and IL721V (V-Series high isolation voltage).
• Updated package drawings.
• Added recommended solder pad layouts.

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation Datasheet Limitations The information and data provided in datasheets shall define the specification of the product as agreed between NVE and its customer, unless NVE and customer have explicitly agreed otherwise in writing. All specifications are based on NVE test protocols. In no event however, shall an agreement be valid in which the NVE product is deemed to offer functions and qualities beyond those described in the datasheet. Limited Warranty and Liability Information in this document is believed to be accurate and reliable. However, NVE does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NVE be liable for any indirect, incidental, punitive, special or consequential damages (including, without limitation, lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Right to Make Changes NVE reserves the right to make changes to information published in this document including, without limitation, specifications and product descriptions at any time and without notice. This document supersedes and replaces all information supplied prior to its publication. Use in Life-Critical or Safety-Critical Applications Unless NVE and a customer explicitly agree otherwise in writing, NVE products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical devices or equipment. NVE accepts no liability for inclusion or use of NVE products in such applications and such inclusion or use is at the customer’s own risk. Should the customer use NVE products for such application whether authorized by NVE or not, the customer shall indemnify and hold NVE harmless against all claims and damages. Applications described in this datasheet are illustrative only. NVE makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NVE products, and NVE accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NVE product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customers. Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NVE does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customers. The customer is responsible for all necessary testing for the customer’s applications and products using NVE products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customers. NVE accepts no liability in this respect. Limiting Values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the recommended operating conditions of the datasheet is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and Conditions of Sale In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NVE hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NVE products by customer. No Offer to Sell or License Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export Co ntrol This document as well as the items described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Automotive Qualified Products Unless the datasheet expressly states that a specific NVE product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NVE accepts no liability for inclusion or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NVE’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NVE’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NVE for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NVE’s standard warranty and NVE’s product specifications.

NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 Phone: (952) 829-9217 Fax: (952) 829-9189 www.IsoLoop.com ©NVE Corporation An ISO 9001 Certified Company NVE Corporation

11409 Valley View Road

Eden Prairie, MN 55344-3617 USA Telephone: (952) 829-9217 Fax: (952) 829-9189 www.nve.com e-mail: iso-info@nve.com ©NVE Corporation All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. ISB-DS-001-IL700V-F August 2014