EDS1290-001 EUROPA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1290-001 Page 1 of 1 EUR PA Part Number Amps Colour and Voltage Poles Protection Degree a (mm) b (mm) Cable Nominal Cross Section Area IAP163F 16A Y ellow 2P+E IP44 150 80 1 - 2.5mm²110V ac IAP323F 32A Y ellow 2P+E IP44 158 80 2.5 - 6mm²110V ac IAP163P 16A Blue 2P+E IP44 150 80 1 - 2.5mm²230V ac IAP323P 32A Blue 2P+E IP44 158 80 2.5 - 6mm²230V ac IAP164N 16A Red 3P+E IP44 150 80 1 - 2.5mm²415V ac IAP324N 32A Red 3P+E IP44 158 80 2.5 - 6mm²415V ac IAP165N 16A Red 3P+N+E IP44 150 80 1 - 2.5mm²415V ac IAP325N 32A Red 3P+N+E IP44 158 80 2.5 - 6mm²415V ac IP44 Appliance Inlet Dimensions