HX03-SP2 LEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Galvanic isolation between primary and secondary circuit
  • Hall effect measuring principle
  • Isolation voltage 3000V
  • Low power consumption
  • Extended measuring range(3x IPN)
  • Insulated plastic case recognized according to UL94-V0. Special feature
  • Single supply from +12V to +15V Advantages
  • Low insertion losses
  • Easy to mount with automatic handling system
  • Small size and space saving
  • Only one design for wide current ratings range
  • High immunity to external interference.

Applications

  • Switched Mode Power Supplies (SMPS)
  • AC variable speed drives
  • Uninterruptible Power Supplies (UPS)
  • Electrical appliances
  • Battery supplied applications
  • DC motor drives Application domain
  • Industrial 061026/5 www.lem.comLEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice. Page 1/2

Dimensions HX 03..50-P/SP2 (in mm. 1 mm = 0.0394 inch) Terminal Pin Identification Primary conductor diameter Secondary pins dimension 0.5 x 0.25 19 Max. 0.5 20Max. 3-P=2.543.5 OUT 6 5 Terminal Pin Identification 8.8 5.4 1.3 -V or 0 3.5 HX 50-P 3 8.8 5.4 1.2 19 Max. 0.5 20Max. 3-P=2.543.5 OUT 5-V or 0 3.5 10.85 3.5 d 10.85 64.5 15.4 Max. 15.4 Max. HX d 03-P 05-P 10-P 15-P 20-P 25-P 50-P Primary conductor diameter Secondary pins dimension 0.5x0.25 Top view Lot No. HX 05-P 41123 HX 03...25-P / dimension HX 02..25-P HX 50-P HX 50-P/SP2 HX 03..25-P/SP2 HX 05-P/ SP2 HX 03-P/ SP2 05-P/ SP2 10-P/ SP2 15-P/ SP2 d 0.6 0.8 1.1 1.4 HX 20-P/ SP2 25-P/ SP2 50-P/ SP2 d 1.6 1.6 1.2 x 6.3 Bottom viewBottom view 061026/5 www.lem.comLEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice. Page 2/2 Safety This transducer must be used in electric/electronic equipment with respect to applicable standards and safety requirements in accordance with the following manufacturer's operating instructions. Caution, risk of electrical shock When operating the transducer, certain parts of the module can carry hazardous voltage (eg. primary busbar, power supply). Ignoring this warning can lead to injury and/or cause serious damage. This transducer is a built-in device, whose conducting parts must be inaccessible after installation. A protective housing or additional shield could be used. Main supply must be able to be disconnected.