HWI453232-121

HWI453232 SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

(a) (c) (b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Inductance code : 1R0 = 1.00uH (a) Series code 2. CONFIGURATION & DIMENSIONS : 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD (a) Core : DR Ferrite Core (c) Terminal : Tinned Copper Plate (d) Capsulate : Epoxy Novolac Molding Compound 3. SCHEMATIC : (d) Tolerance code : K = ±10%, M = ±20% (e) F : Lead Free HWI453232 SERIESMOLDED WIREWOUND CHIP INDUCTORS PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 26.02.2009 d a (b) Wire : Enamelled Copper Wire Unit:m/m b 1.2±0.2 1R0 F C E B A F ABCEFGHI c HW I 4 5 3 2 3 2 - 1 R 0 K F PCB Pattern I G I H

SUPERWORLD ELECTRONICS (S) PTE LTD d) Operating temp. : -40°C to +125°C c) Storage temp. : -40°C to +125°C b) Ambient temp. : 100°C Max. a) Temp. rise : 20°C Max. HWI453232 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 26.02.2009 e) Terminal strength : 0.5Kg Min. 5. GENERAL SPECIFICATION : h) Resistance to solvent : Per MIL-STD-202F g) Resistance to solder heat : 260°C for 10secs f) Rated current : Current cause inductance drop within 10% MOLDED WIREWOUND CHIP INDUCTORS Cooling AreaReflow AreaRising Area Preheat Area 3~5°C/sec 150 200500 100 Time (seconds) Temperature (°C) 150 100 250 200 (45~70sec) 150~180°C / 90~150 sec2~4°C/sec 250±5°C 10sec 2~4°C/sec 250 Peak Temp : 250°C Max. Max time above 200°C : 70sec Max. Max time above 230°C : 40sec Max. 6. CHARACTERISTICS CURVES : Temperature

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 26.02.2009 7. ELECTRICAL CHARACTERISTICS : MOLDED WIREWOUND CHIP INDUCTORS 13.04.00.79620330.00HWI453232-331 F 90 100 120 120 140 160 240 280 330 400 500 600 650 700 800 900 1000 180 200 850 950 1050 650 550 600 370 300 220 260 450 750 HWI453232-271 F HWI453232-221 F HWI453232-181 F HWI453232-151 F HWI453232-121 F HWI453232-560 F HWI453232-390 F HWI453232-270 F HWI453232-180 F HWI453232-120 F HWI453232-8R2 F HWI453232-5R6 F HWI453232-3R9 F HWI453232-2R7 F HWI453232-1R8 F HWI453232-1R2 F HWI453232-820 F HWI453232-101 F HWI453232-2R2 F HWI453232-1R0 F HWI453232-1R5 F HWI453232-150 F HWI453232-680 F HWI453232-470 F HWI453232-330 F HWI453232-220 F HWI453232-100 F HWI453232-6R8 F HWI453232-4R7 F HWI453232-3R3 F 10 0.80192.5218.00 68.00 150.00 270.00 220.00 180.00 120.00 100.00 82.00 56.00 39.00 47.00 27.00 22.00 33.00 2.60102.52 7.00.796 0.796 0.796 0.796 5.0 5.5 6.5 0.796 0.796 2.52 7.5 6.50 11.0 9.00 7.50 4.50 4.00 3.50 11.5 2.52 2.52 2.52 2.52 2.52 2.52 2.20 1.60 1.90 1.20 0.90 1.40 103.90 8.20 12.00 15.00 10.00 5.60 6.80 4.70 1.80 2.70 2.20 3.30 1.20 1.00 1.50 0.24407.96 257.96 2.52 2.52 2.52 7.96 7.96 7.96 0.40 0.60 0.50 0.70 0.30 0.27 0.35 1007.96 7.96 7.96 7.96 7.96 7.96 7.96 160 130 180 0.16 0.20 0.18 0.22 0.12 0.15 0.11 Inductance tolerance : : K : ±10% M : ±20% HWI453232-391 F HWI453232-471 F HWI453232-561 F HWI453232-681 F 0.796 0.796 0.796 0.796 560.00 680.00 390.00 470.00 3.0 2.5 3.0 3.0 17.0 70 22.8 65 13.5 15.0 75 Frequency ( MHz ) Test Part No. QInductance ( µH ) Min. SRF RDC Min. ( MHz ) Max. ( ȍ ) IDC Max. ( mA )

SUPERWORLD ELECTRONICS (S) PTE LTD HWI453232 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 4 26.02.2009 N G A ( 2 ) DIMENSIONS A 178 B ( 1 ) CONFIGURATION T B Unit:m/m * CARRIER TAPE WIDTH : D D G 14 50 N EMBOSSED CARRIER D COVER TAPE ØC 2.0±0.5 ØC 8. PACKAGING INFORMATION : MOLDED WIREWOUND CHIP INDUCTORS 21±0.8 C T 16.5 COMPONENTS USER DIRECTION OF FEED TRAILER NO COMPONENT 160mm Min. END P:8 m/m1R0 4 m/m 1R0 1R0 TRAILER NO COMPONENT 390mm Min. 1R0 1R0 1R0 START

SUPERWORLD ELECTRONICS (S) PTE LTD HWI453232 SERIES 9. RELIABILTY TEST : NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 26.02.2009 MOLDED WIREWOUND CHIP INDUCTORS

5 MINUTES

10 MINUTES

NOT BE MORE THAN 20°C AND COATING TEMP :260±5°C 3. DIRECTION :X, Y, Z 4. DURATION :2 HRS / X, Y, Z TIME :10±1.0 SEC 1. AMPLITUDE :1.5 m/m 1. APPLIED THE ALLOWED DC CURRENT FOR IMPEDANCE ANALYZER : HP4194A, HPE4991A INDUCTANCE CHANGE SHALL BE LESS THAN 10% TO INITIAL VALUE & TEMPERATURE RISE SHALL CURRENT TO INDUCTOR FOR A PERIOD OF INDUCTORS TERMINAL AND CASE FOR 5 MINUTES AC VOLTAGE OF 1000VAC APPLIED BETWEEN

100 VDC APPLIED BETWEEN INDUCTOR TERMINAL

INDUCTORS SHALL BE DROPPED 10 TIMES FROM A HEIGHT OF 1m ONTO 3cm WOODEN BOARD 2. FFREQUENCY :10 -- 55 -- 10 HZ / 1MIN APPLIED THE CURRENT TO COILS, THE 2. TEMPERATURE MEASURE BY DIGITAL APPLIED 2 TIMES OF RATED ALLOWED DC TEST CONDITION / TEST METHOD HP4194A, HPE 4991A, HP4285A DIGITAL MULITMETER : 502BC Q AFTER TEST, INDUCTORS OF ELECTRICAL AND 2. INDUCTANCE SHALL 1000 MOHM MIN. MECHANICAL DAMAGE 3. Q SHALL NOT CHANGE 1. INDUCTORS SHALL BE SHALL BE NO EVIDENCE MECHANICAL PERFORMANCE TEST VIBRATION TEST ( LOW FREQUENCY ) RESISTANCE TO SOLDERING HEAT SHOCK TEST INSULATION RESISTANCE TEST WITHSTANDING VOLTAGE TEST NO EVIDENCE OF NOT CHANGE MORE ELECTRICAL AND MORE THAN ±20% MECHANICAL DAMAGE THAN ±5% MECHANICAL DAMAGE CHARACTERISTIC LIST 20°C MAX OF ELECTRICAL AND ELECTRICAL REFER TO STANDARD AFTER TEST, INDUCTORS SHALL BE NO EVIDENCE RISE TEST OVER LOAD TEST TEMPERATURE RATED CURRENT IDC DC RESISTANCE RDC SELF RESONANCE FREQUENCY SRF ELECTRICAL PERFORMANCE TEST INDUCTANCE L TEST ITEM SPECIFICATION

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 6 26.02.2009 HWI453232 SERIES 9. RELIABILTY TEST : MOLDED WIREWOUND CHIP INDUCTORS AFTER FLUXING, INDUCTOR SHALL BE DIPPED INTHE TERMINAL SHALL CLIMATIC TEST HUMIDITY LOAD LIFE HIGH TEMPERATURE SOLDERABILITY TEST LOAD LIFE TEST DRY HEAT TEST THERMAL SHOCK TEST COLD TEST HUMIDITY TEST TEMPERATURE CHARACTERISTIC RESISTANCE TO SOLVENT TEST -40±2°CROOM TEMP 3. Q SHALL NOT 1. TEMP :40±2°C 1. TEMP :85±2°C 2. TIME :96±2 HOURS 1. TEMP :85±2°C TOTAL :5 CYCLES 4. LOAD :ALLOWED DC CURRENT 3. TIME :1000±12 HOURS 3. LOAD :ALLOWED DC CURRENT 2. TIME :1000±12 HOURS EVIDENCE OF SHORT OR THERE SHALL BE NO OPEN CIRCUITING CHANGE MORE THAN ±20%

15 MINS

30 MINS

+125±2°C 1. TEMP :-25±2°C 2. TIME :96±2 HOURS -40°C ----- +125°C 3. TIME :96±2 HOURS 1. TEMP :40±2°C 5 SECONDS. MIL-STD-202F, METHOD 215D A MELTED SOLDER BATH AT 240±5°C FOR NOT CHANGE MORE 2. INDUCTANCE SHALL 1. INDUCTORS SHALL BE NO EVIDENCE OF ELECTRICAL AND MECHANICAL THAN ±10% DAMAGE APPEARANCE OR OBLITERATION OF COVERED WITH SOLDER THERE SHALL BE NO CASE DEFORMATION BE AT LEAST 90% CHANGE IN MARKING TERMINAL STRENGTH-PULL TEST 1 MINUTE. TERMINALS IN THE AXIS DIRECTION FOR A 0.5KG LOAD SHALL BE APPLIED TO BOTHTERMINAL SHALL NOT BE LOOSENED OR RUPTURED or more but more than 2 hours, measure the electrical and mechanical performances Unless otherwise specified, allow the spec imen to stand at room temperature for 1 hour Note :