HW331A SEOUL | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Features

  • High flux output and high luminance
  • Designed for high current operation
  • U n i f o r m c o l o r
  • Low profile and low thermal resistance
  • Packaged in tubes for use with automatic insertion equipment Application
  • Automotive exterior lighting
  • Electronic signs and signals
  • Channel letter / lighting
  • Decorative lighting
  • Specialty Lighting Technical Datasheet

-2- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Outline Dimensions Notes : Protruded epoxy is 1.4mm maximum. Unit : mm 7.62 ± 0.5 5.0° 2.5 ± 0.5 7.5 ± 0.5 4.4

1.4 MAX

5.08 ± 0.3 0.4 ± 0.2 5.08 ± 0.2 1.5±0.2 0.76 ± 0.1 0.5 7.62 ± 0.5 1.1 3 ± 0.2 CHAMFER 1.25 X 1.25 CATHODE ANODE

-3- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Value Item Symbol Min. Typ. Max. 2.6 4.0 - Luminous Intensity IV - 1600 - mcd Forward Voltage[4] VF -3 . 4 4 . 0V Optical Efficiency ŋopt -3 8- l m / W Thermal Resistance RθJ-P 130 ºC /W Chromaticity Coordinate[3] X, y x=0.31, y=0.31 - View Angle 2θ½ 110 deg. -5Reverse Current (at VR = 5V) IR - µA Unit Luminous Flux [1] ФV [2] lm Electro-Optical Characteristics ( Ta = 25ºC, IF=30mA ) Absolute Maximum Ratings ( Ta = 25ºC ) mW120PDPower Dissipation V5VRReverse Voltage ºC260ºC for 5second [6]TSSolder Temperature ºC-30 ~ 85ToprOperating Temperature mA100IFP [5]Forward Peak Pulse Current ºC-40 ~ 100TstgStorage Temperature mA30IFDC Forward Current UnitValueSymbolItem Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color Coordinates Measurement allowance is ± 0.01 [4] A tolerance of ±0.05V on forward voltage measurements [6] No closer than 1.5mm from the base of the stopper.

-4- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Reliability Tests < Judging Criteria For Reliability Tests > LSL [2] X 0.7ФV USL X 2.0IR USL[1] X 1.2VF Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level. 0/221 time1kV, 1.5kΩ ; 100pFESD (Human Body Model) cycles Ta = -40ºC (15min) ~ 100º (15min) (Transfer time : 10sec, 1Cycle = 30min)Thermal Shock 0/22500hrsTa = 85ºC, RH = 85%, IF = 10mATemperature Humidity Operating 0/221000hrsTa = 85ºC, RH = 85%Temperature Humidity Storage 0/221000hrsTa = -40ºCLow Temperature Storage 0/221000hrsTa = 100ºCHigh Temperature Storage Failures 1 timeTs = 255 ± 5ºC, t = 4 ± 1secResistance to soldering Heat 1000hrsTa = 85ºC, IF = 10mAHigh Temperature Operating 1000hrsTa = -30ºC, IF = 30mALow Temperature Operating 1000hrsTa = RT, IF = 30mALife Test NoteConditionItem

-5- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Characteristic Diagrams Forward Voltage vs. Forward Current Forward Current vs. Relative Flux 0 2 04 06 08 0 1 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Relative Luminous Flux Forward Current [mA] 100 Forward Current(mA) Forward Voltage [V] Ta= 25ºC Ta= 25ºC Forward Current vs. Chromaticity Coordinate 0.28 0.29 0.30 0.31 0.32 0.33 1mA 10mA 20mA 30mA50mA 100mA y x Ta= 25ºC Ambient Temperature vs. Maximum Forward Current -40 -20 0 20 40 60 80 100 Forward Current IF [mA] Ambient Temperature TA [ O RthJ-A = 300 O C /W

-6- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) 0 2 04 06 08 0 1 0 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Relative Luminousity Flux Ambient Temperature Ta[ o Directivity Ambient Temperature vs. Relative Flux IF= 30mA Ta= 25ºC, IF= 30mA Ambient Temperature vs. Forward Voltage 400 500 600 700 0.0 0.5 1.0 Relative Emission Intensity Wavelength [nm] Spectrum Ta= 25ºC, IF= 30mA 0 2 04 06 08 0 1 0 0 2.8 3.0 3.2 3.4 3.6 Forward Voltage [V] Ambient Temperature Ta[ o IF= 30mA -90 -60 -30 0 30 60 90 0.0 0.2 0.4 0.6 0.8 1.0 Relative Luminous Intensity Off Axis Angle [deg.]

-7- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Color Ranks Note : Color Coordinates Measurement allowance is ± 0.01 0.3150.3390.3600.329y 0.3070.3300.3300.304x Rank b2 0.2940.3180.3390.315y 0.3110.3300.3300.307x Rank c2 0.3850.3510.3180.360y 0.3610.3560.3300.330x Rank d 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 15000K 9000K 5600K d a CIE(y) CIE(x) 4600K Pla nkian line 0.3050.2760.2480.267y 0.2830.2960.2800.264x Rank a 0.2960.3150.3290.305y 0.2870.3070.3040.283x Rank b1 0.2760.2940.3150.296y 0.2960.3110.3070.287x Rank c1

-8- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Bin Code Description Bin Code Luminous Flux CIE Forward Voltage Gc 14 Color Rank @ IF = 30mA a d Forward Voltage (V) @ IF = 30mA Bin Code Min. Max. 12 . 8 3 . 0 2 3.0 3.2 3 3.2 3.4 4 3.4 3.6 5 3.6 3.8 6 3.8 4.0 7 4.0 4.2 8 4.2 4.4 9 4.4 4.6 13.010.0L 10.07.6K 7.65.8J 5.84.4H 4.43.4G 3.42.6F 2.62.0E 0.70.5A 1.41.0C 2.01.4D 1.00.7B Max.Min.Bin Code Luminous Flux (lm) @ IF = 30mA Available ranks

-9- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Packing 485±1 21600pcs/box (12packs/box) * Aluminum Sealing pack (in silica gel)1800pcs max/pack (30tubes max/pack) HXXXX QTY : 1800pcs LOT : 200X.XX.XX XXX SEOUL SEMICONDUCTOR CO., LTD OOO RANK 3.2 5.1 9.72 0.6 2.6 5.8 SEOUL SEMICONDUCTOR CO., LTD. HXXXX 60pcs BINOOO (21600pcs max/box) (12packs max/box) Unit : mm * Cardboard box (500x220x280) * Plastic tube 60pcs max/tube

-10- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Soldering Profile 2) Hand Soldering conditions

  • Not more than 3 seconds at max. 350ºC, under Soldering iron. 3) Caution
  • Leadframes are silver plated copper alloy. This substance has a low thermal coefficient (easily conducts heat)
  • No closer than 1.5mm from the base of the stopper.
  • The LEDs must not be repositioned after soldering.
  • Do not apply any stress to the lead particularly when heat. Note : In case the soldered products are reused in soldering process, we don’t guarantee the products. 1) Recommended Wave Soldering Conditions / Profile
  • Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max).
  • Soldering heat to be at 255 ºC (260ºC max) for 4 seconds (5 seconds max.)
  • Soak time above 200 ºC is 5 seconds 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 100 150 200 250 300 Temperature [ O Ti me[s] PREHEAT 20s (60s Max) 85 ºC(120 ºC max) PEAK 4s (5s max) 255 ºC (260 ºC max)

-11- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) Precaution for Use 1) Storage

  • Before opening the package a. Avoid the absorption of moisture, we recommended to store High Flux LEDs in a dry box(or desiccator) with a desiccant . Otherwise, store them in the following environment: Temperature : 5℃~30℃ Humidity : 50% max. b. The products should be used in 3 months. It is recommended that the LEDs be used as soon as possible.
  • After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40℃, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 60±5℃
  • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering.
  • Avoid quick cooling
  • Leadframes are silver plated copper alloy. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Static Electricity
  • Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
  • All devices, equipment and machinery must be properly grounded. It is recommended precautions be taken against surge voltage to the equipment that mounts the LEDs.

-12- WHITE HIGH FLUX LED HW331A <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) SEOUL SEMICONDUCTOR CO., LTD. 148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL : +82-2-3281-6269 FAX :+82-2-858-5537 Homepage : www.seoulsemicon.com www.zled.com E-Store : www.zledstore.com E-mail : sscsale@seoulsemicon.com 3) Heat Generation

  • Thermal is one of the important parameter to design the end product. Please consider the heat generation of the LEDs.
  • The operating current should be decided after considering the ambient maximum temperature of LEDs. 4) Others
  • The color of the LEDs is changed a little by an operating current and thermal.
  • Anti radioactive ray design is not considered for the products listed here in.
  • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed.
  • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used.
  • When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5
  • The appearance and specifications of the product may be modified for improvement without notice.