HVO

HVO LINKCOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

• AC Input 100~277VAC
• Built-in Active PFC Function
• Protection: SCP / OVP / OTP
• 12V Auxiliary Output
• Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance)
• Power saving < 0.35W at Dim to off.
• Flicker Free
• Surge protection: L-N 4KV, L-FG/N-FG 6KV
• Safety: UL 8750
• EMI: FCC Part 15 Class B / CE
• IP 67 Compliant
• Warranty: 3 years (refer to warranty policy)
• RoHS Compliant 100VAC 120VAC 200VAC 277VAC 100VAC 120VAC 200VAC 277VAC Units Vac Hz A A A A mA Units V s V A Units 100VAC in Input Current (150-HVO) 1.76 100VAC in Input Current (120-HVO) 1.41 HVO150U182FFB0 150 43 - 86 1.75 ±5% ±5%HVO150U212FFB0 HVO150U701FFB0 150 107 - 214 0.7 ±5% HVO150U112FFB0 150 71 - 143 1.05 ±5% 120 34 - 69 1.75 ±5% 54 - 107 305 Input Specifications HVO120U142FFB0 120 43 - 86 1.4 ±5% 36 - 72 1.4 Protection Functions ±5% FEATURES: DC OUTPUT VOLTAGE (V)
• High Operating Ambient Temp.: -40℃~+60℃ 100 OUTPUT CURRENT TOLERANCE PRODUCT SPECIFICATION MODEL DC OUTPUT POWER (W) OUTPUT CURRENT (A) 120 107 - 172 0.7 120 ±5% 36 - 72 ±5% 100 ±5% 58 - 115 1.05 HVO100U351FFB0 ±5% 143 - 286 ±5% Power Supply EFFICIENCY (Ref.) HVO100U142FFB0 100 1.05 Typ. 150 2.1 150 HVO100U701FFB0 100 0.35 0.7 Input Current (100-HVO) 1.22 Input Frequency Range 47 63 Inrush Current 65 Leakage Current 0.75 Power Factor (PF) 0.9 Total Harmonics Distortion (THD) 20 Max. Line Regulation ±3 Typ.Min. Load Regulation ±3 Output Current Regulation ±5 Ripple and Noise (pk-pk) 1 Ripple Current Turn-on Delay Time 1 Min. Max. Auxiliary Output Source Current 0 Over Voltage Protection Short Circuit Protection Over Temp Protection (Tc) Auto recovery Auto recovery Conditions/Description 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)HVO120U701FFB0 ±5% HVO120U112FFB0 HVO150U142FFB0 ± 10% Tolerance (Available for customization) *Measured at 100-277VAC and at full load. *Measured at electronic load LED mode and nominal input voltage with DC10V dimming.<30% of rated output current 0.42 Auto recovery Typ. 72 - 143 277VAC in 230VAC in,25℃ Cold start 100VAC in Input Voltage Range 90 Min. HVO120U182FFB0 Power Factor (Typ.) 100 Conditions/Description 1.4 Max. HVO100U112FFB0 48 - 95 20MHz Bandwidth. Conditions/Description Output Specifications 100-277VAC,100% load Auxiliary Output Voltage Linkcom Manufacturing Co., Ltd.

%RH %RH g EMC Compliance and Safety Electrostatic Discharge (ESD) UL PSE Notes (1) All specifications Typical @25℃, unless otherwise noted, at normal line and load. (2) Ripple and Noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk @20MHz bandwidth. (3) Specified for free-air convection cooling. (4) 3 in 1 Dimming function .(Analog voltage 0~10VDC ; 10V PWM signal 500Hz ~ 10 KHz ; Resistor 1K~100K) (4) Minimum load is NOT required for proper operation . ＊REFERENCE: www.linkcom.com.tw ＊Please contact sales@linkcom.com.tw, sales@linkcomusa.com for more information Comply with PSE L-N 4KV, L-FG/N-FG 6KV Comply with IEC 61000-4-6Conducted RF Disturbances Comply with UL 8750 EMC Compliance Safety Comply with EN 61000-3-3 Comply with IEC 61000-4-2 Comply with IEC 61000-4-3 Comply with IEC 61000-4-4 Surge Immunity Operating Humidity Power Frequency Magnetic Field Voltage Dips Comply with EN 55015 (CISPR15) Comply with EN 61000-3-2 Comply with IEC 61000-4-5 Harmonic Current Emissions Voltage Fluctuations & Flicker RF Electromagnetic Field Susceptibility Comply with IEC 61000-4-11

8 KV air discharge, 4 KV contact discharge

Measured at 277VAC, 45,000 hours at Tc 75°C Non-condensing Case temperature measured at the case hot spot Measured at 277VAC,Ta 60℃ Operating Temperature (Ta) Operating Case Temperature (Tc) EMS Standards Life Time Weight -40 80 10 95 Storage Temperature 990 Electrical Fast Transient 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) Comply with IEC 61000-4-8 Dimensions(L*W*H) Non-condensingStorage Humidity Conducted and Radiated Emmission -40 Non-condensing Min. Typ. Max. Conditions/Description Non-condensing Linkcom Manufacturing Co., Ltd.

DERATING CURVE (HVO-100W) DERATING CURVE (HVO-120W) DERATING CURVE (HVO-150W) 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) Linkcom Manufacturing Co., Ltd.

＊The above mechanical diagram is for reference only. The actual product should be in accordance with the specification for approval. ＊REFERENCE: www.linkcom.com.tw 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) Linkcom Manufacturing Co., Ltd.

Compatible Occupancy Sensors DC 0-10V Dimming Performance Notes: 1. Purple and Gray wires on the output side are used for 0-10V dimming. 2. Recommended dimmers are Leviton IP710,Lutron NTSTV-DV or equivalent. 3. When dimming wires +Purple/-Gray are left open, the output current will be at 100%. MinimumParameters Typical Maximum Absolute maximum voltageon on the 0-10(+) Purple Wire 0V ─ 10V Source current on the 0-10V(+) Purple Wire 0mA ─ 1mA 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) Manufacturer Sensor Model number IR-TEC BOA 5xx Series 12~24VDC Acuity Brands Lighting Sensor Switch MSOD 7 12~24VDC HVO Series RED (LED+) BLACK (LED-) BROWN (AUX+) PURPLE (DIM+) GRAY (AUX-/DIM-) Dimmer SENSOR Linkcom Manufacturing Co., Ltd.

PWM Dimmiable Duty cycle 0%~100% 10V 1KHz Dimming Performance Dimmiable External Resistor Parameters Minimum ─ 10V ─ Typical Maximum 0.1mA ─ 500Hz 10KHz Input LOW Level Voltage Range (Purple Wire) ─ 0V ─ Input HIGH Level Voltage Range (Purple Wire) PWM Input Signal Frequency 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) Parameters Minimum Typical Maximum Resistance range of Dimmable 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) Current into PWM Input (Purple Wire) ─ Dimmiable External Resistor Dimming Performance 10K 100K Resistance of Dim to off 5K Linkcom Manufacturing Co., Ltd.

Output Current vs. Load (HVO150U142FFB0) Efficiency vs. Load (HVO150U142FFB0) THD vs. Load (HVO150U142FFB0) 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) 1.000 1.100 1.200 1.300 1.400 1.500 40% 50% 60% 70% 80% 90% 100% 110% Output Current (A) Load (%) Output Current vs. Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 60.0% 70.0% 80.0% 90.0% 100.0% 40% 50% 60% 70% 80% 90% 100% 110% Efficiency (%) Load (%) Efficiency vs. Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 0.0% 10.0% 20.0% 30.0% 40.0% 50.0% 40% 50% 60% 70% 80% 90% 100% 110% THD (%) Load (%) THD vs. Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 Linkcom Manufacturing Co., Ltd.

PF vs. Load (HVO150U142FFB0) 3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) 0.70 0.75 0.80 0.85 0.90 0.95 1.00 40% 50% 60% 70% 80% 90% 100% 110% Power Factor Load (%) PF vs. Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 Linkcom Manufacturing Co., Ltd.

Linkcom Manufacturing Co., Ltd.