HVI10 HITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

-1- H HiTRON UNIVERSAL INPUT AC-DC PCB OPEN FRAME SINGLE & DUAL OUTPUT 10 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI10 SERIES FEATURES: „ ACCOMMODATE UNIVERSAL AC SOURCES „ COMPACT PCB OPEN FRAME FORMAT „ MEET UNIVERSAL SAFETY STANDARDS „ EMI MEET CISPR PUB. 22 & FCC CLASS B „ CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range Typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex # 5273. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A @230Vac. Input Current: Typ. 0.3A @115Vac, 0.15A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB.22 & FCC Class B. Hold-up Time: Typ. 20mS @115Vac, 80mS @230Vac. Earth leakage: Typ. 0.3mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 10 watts. Output Connector: Molex # 5273. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-1.5%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 65%. Switching Frequency: Typ. 55K Hz at 115Vac. Circuit Topology: Free-running flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 0.89Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory.

-2- OUTPUT VOLTAGE / CURRENT RATINGS CHART MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 158.0 g (5.57 Oz.) SINGLE OUTPUT MAIN VO1 @ MODEL NO. Typ. Volt. Max. HVI10-10 2.0A 5.0V 3.00A HVI10-11 1.0A 12.0V 1.50A HVI10-12 0.7A 15.0V 1.20A HVI10-13 0.5A 24.0V 0.75A DUAL OUTPUT Symbol: "" OVP built-in. "@" Adjustable. " ◇" Floating (or isolated) output. "y" Installed with Post Regulator. (P.R.) Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Peak output, less than 60 Sec. with 10% duty cycles. (3) Max. current can't be drawn from all output at the same time. INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT SINGLE/DUAL OUTPUT ASSIGNMENT AC-LINE AC-NEUTRAL AC- GROUND -VO1 +VO1 -VO2 +VO2 CONNECTOR &PIN # P1-L P1-N P1-G P2-1,2 P2-3,4 P2-5 P2-6 Mating connector: Molex 5195 or 5239 series.