HVP101 HITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
-45- H HiTRON UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HVP101 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES PCB VERSION FORMAT MEET IEC 61000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-M connector. Output Wattage: Typ. 100 Watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2%. Aux. VO2 typ. ±1-2% (Magnetic Amp.). Aux. VO3 typ. ±1-2% (Magnetic Amp.). Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in at main VO1 & Aux.VO2 & VO3 (latch). Remote Sensing: Available at VO1 & VO2. Adjustability: Available at VO1,VO2 & VO3. Over Current Protection: Built-in at all output. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Input Connector: V-M connector & GND tag. Input Frequency: 47-63Hz. Inrush Current: Typ. 29A@230Vac. Input Current: Typ. 1.3A @115Vac, 0.65A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR EN 55022 & FCC Class B. Hold-up Time: Typ. 18-25mS @ 115Vac & 230Vac. Power Factor & Harmonic Correction: Meet IEC 61000-3-2, PF typ. 0.97-0.99 @ full load. Power OK: Installed in VO1 & VO2. Over Temperature Protection (OTP): By NTC at quad output only. Earth Leakage: Less than 0.75mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 75-80%. Switching Frequency: PFC ckt. 75K Hz. PWM ckt. 170-180K Hz. Circuit Topology: Fixed frequency forward circuit. Transient Response: Output voltage returns in less than 0.3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Operating Temperature: 0 to +50°C under forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: 0.04% /°C. Cooling: At least 30 cfm direct forward air flow is required to achieve full rating power. Construction: PCB format. Power Density: 5.6 Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application
-46- OUTPUT VOLTAGE / CURRENT RATINGS CHART MECHANICAL DIMENSIONS: M M [ I N C H E S ] W E I G H T : 368.0g(12.97 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS AC INPUT SINGLE OUTPUT DUAL OUTPUT QUAD OUTPUT ASSIGNMENT L N GND VO1 DC COM +VO1# P.OK VO1 VO2 DC COM +VO1 # +VO2 # P.OK VO1 DC COM VO2 VO3 VO4 VO1+ # VO2+ # VO1,2- # P. OK CONNECTOR & PIN # P1-3 P1-1 Tab P2-6,7,8, 9,10,11 P2-1,2, 10,11 P2-6, 7,8 P2-1,2, 3,4 P2-13 P2-12 P2-14 P2-1,2, 3,4 P2-5,6 7,8 P2-9,10 P2-11 P2-12 P3-3 P3-4 P3-1 P3-2 Mating connector: Molex 5195 or 5239 series. SINGLE OUTPUT (Under forced air flow) MAIN VO1 ★@# MODEL NO. Typ. Volt. Peak HVP101-S033200 20.0A 3.3V 25.0A HVP101-S050160 16.0A 5.0V 20.0A HVP101-S120085 8.5A 12.0V 9.0A HVP101-S150068 6.8A 15.0V 7.0A HVP101-S240042 4.2A 24.0V 6.0A HVP101-S280036 3.6A 28.0V 5.0A HVP101-S360028 2.8A 36.0V 4.0A HVP101-S480021 2.1A 48.0V 3.0A DUAL OUTPUT (Under forced air flow) HVP101-D050E 12.0A +5.0V 6.0A +5.0V HVP101-D050I 12.0A +5.0V 4.0A +12.0V HVP101-D050K 12.0A +5.0V 3.0A +15.0V HVP101-D050D 12.0A +5.0V 8.0A +3.3V HVP101-D033I 15.0A +3.3V 4.0A +12.0V HVP101-D033K 15.0A +3.3V 3.0A +15.0V QUAD OUTPUT (Under forced air flow) Remark: Peak output, less than 60 Sec. with 10% duty cycle. SINGLE/DUAL OUTPUT QUAD OUTPUT