HSM21PT CHENMKO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES
- For surface mounted applications * Low forward voltage, high current capability * Low leakage current * Metallurgically bonded construction * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * High temperature soldering guaranteed : 260oC/10 seconds at terminals Case: JEDEC SMA molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Weight: 0.002 ounces, 0.064 gram MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. HSM21PT THRU HSM28PT SMA CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 2.0 Amperes ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) NOTES : 2002-5 Maximum Full Load Reverse Current Average, Full Cycle at TA = 55oC CHARACTERISTICS SYMBOL UNITS 1.31.0 1.5 1.7 5.0 50 70 uAmps 100 uAmps nSec VoltsMaximum Instantaneous Forward Voltage at 2.0 A DC Maximum DC Reverse Current at Rated DC Blocking Voltage at TA = 25oC MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TL = 100oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO CJ VF Maximum Reverse Recovery Time (Note 2) trr IR TJ, TSTG IFSM UNITS Volts Volts Volts Amps HSM21PT HSM23PT 200 140 200 HSM24PT 210 300 300 HSM25PT 400 280 400 HSM26PT 600 420 600 HSM28PT 1000 700 1000 HSM27PT 800 560 800 2.0 30 20 -65 to +150 Amps pF oC HSM22PT 100 100 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts 2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A HSM21PT HSM23PT HSM24PTHSM25PT HSM26PT HSM28PTHSM27PTHSM22PT (1) (2) SMADimensions in inches and (millimeters) 0.110(2.80) 0.094(2.40) 0.090(2.30) 0.075(1.90) 0.060(1.52) 0.030(0.76) 0.012(0.310) 0.006(0.150) 0.181(4.60) 0.165(4.20) 0.065(1.65) 0.049(1.25) 0.212(5.40) 0.189(4.80)
RATING CHARACTERISTIC CURVES ( HSM21PT THRU HSM28PT ) FIG. 1 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC FIG. 3 - TYPICAL REVERSE CHARACTERISTICS FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 6 - TYPICAL JUNCTION CAPACITANCEFIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT, (uA)PEAK FORWARD SURGE CURRENT, ( A ) JUNCTION CAPACITANCE, ( pF ) REVERSE VOLTAGE, ( V )NUMBER OF CYCLES AT 60 Hz INSTANTANEOUS FORWARD VOLTAGE, ( V )PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) INSTANTANEOUS FORWARD CURRENT, ( A ) NONINDUCTIVE NONINDUCTIVE D.U.T( + )
25 Vdc
(approx) ( - ) 1 NON- INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) ( - ) ( + ) NOTES: 1. Rise Time = 7 ns max. Input Impedance = 1 megohm. 22 pF. 2. Rise Time = 10 ns max. Source Impedlance= 50 ohms. +0.5A -0.25A -1.0A trr 1cm SET TIME BASE FOR 10/20 nS/cm AVERAGE FORWARD CURRENT, ( A ) LEAD TEMPERATURE ( O C ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE Single Phase Half Wave 60Hz Resistive or Inductive Load 2.0 1.0 250 50 75 100 125 150 175 1.0 0.1 .01 .001 Pulse Width = 300uS 1% Duty Cycle TJ =25oC TJ =25oC TJ =25oC TJ =100oC TJ =125oC .01 1.0 100 200 100 .1 .2 .4 1.0 2 4 10 20 40 1001 2 5 10 20 50 100 8.3ms Single Half Sine-Wave (JEDEC Method) 50 10 HSM21PT~HSM23PT HSM21PT~HSM25PT HSM26PT~HSM28PT HSM24PT~HSM25PT HSM26PT HSM27PT~HSM28PT