6000700 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS DL0722 - REV 2 WELDING HEADSHIELD MODEL NO: HS1 PART NO: 6000700
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com INTRODUCTION Thank you for purchasing this CLARKE Welding Headshield. Please read this manual thoroughly and follow the instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the product giving you long and satisfactory service. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. ENVIRONMENTAL PROTECTION If broken, do not dispose of this product with general household waste. This product contains valuable raw materials and should be disposed of appropriately at a recognised disposal facility. SPECIFICATION Viewing field (W x H) 103 X 81 mm Filter shade number (DIN) 11 Operating temperature range -5 oC to +50oC Weight 0.44 kg Dimensions (D x W x H) 300 x 215 x 230 mm (excluding headband)
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com GENERAL SAFETY WARNINGS
- The protective lens in this headsh ield is breakable and should only be used for welding applications. This headshield is designed for use in arc welding or cutting applications such as ARC, MIG/MAG. Use this headshield for face and eye protection against harmful rays, sparks and spatter from welding and cutting. This headshield is not suitable fo r laser welding, laser cutting or “overhead” welding applications, or for oxyacetylene. Never place this product on a hot surface. Do not make any modifications to this product. Protection can be seriously impaired if modifications are made. When necessary, use identical repl acement parts. This will ensure that the safety of the product is maintained. Only trained welders should use this product. Do not use without protective lens cover installed. Do not use if any part of the headshield is cracked or broken. Do not use this headshield for wel ding above the range of DIN 11. Harm to the eyes and impaired eyesight may result. Always use the mask for the duration of exposure to hazards. Stop work if dizziness or eye irritation occurs or if the mask becomes damaged. Please keep these instructions in a safe place for future reference.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com PREPARATION & USE ADJUSTING THE HEADBAND TO FIT The headband should be adjusted both in diameter and height to fit the wearer’s head. To do this: 1. Press the headband adjustment knob on the back of the headband and rotate the knob either left or right to expand or contract the headband. 2. The top headband can be adjusted by bending the strap and positioning the peg in the appropriate hole. ADJUSTING THE TILT ANGLE 1. Loosen the adjusting nuts slightly. 2. Move the tab onto the chosen pin on the headband, repeat on both sides. NOTE: The tabs should be located on the same pin on either side of the headband. 3. Retighten the adjusting nuts. 4. Try the headshield on and if necessary, readjust. CARE & MAINTENANCE GENERAL Damaged components must be replaced immediately to avoid risk of eye and face injuries. Periodically inspect the lenses. Cracked, pitted or scratched lenses reduce vision and seriously reduce level of protection and should be replaced with genuine, certified spare parts. The lens can be removed for cleaning or replacement after prising out the lens retainer. CLEANING & STORAGE The headshield should be stored in its box or similar place. Clean all lenses with a soft tissue and suitable lens cleaning fluid. Do not use solvents. Never use tools or other sharp objects to remove material from the lens or headshield. This may cause damage which may impair function and invalidate the warranty.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com COMPONENT PARTS 1H e l m e t B o d y 2H e a d b a n d
3 Headband Adjustment Knob
- Headband Angle Adjustment Knobs 5R e a r L e n s H o l d e r
6 Clear Lens Protector
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com DECLARATION OF CONFORMITY - UKCA
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com DECLARATION OF CONFORMITY - CE