3400940 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
ASSEMBLY & USER INSTRUCTIONS LS1111 ROTARY SOIL SIEVE MODEL NO: CRS400 PART NO: 3400940 CRS400 Rotary Seive.fm Page 1 Wednesday, November 16, 2011 11:20 AM
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. ASSEMBLY 1. Take the two separate legs (A) and bolt each (x2) to the side of the drum (B) with feet facing inwards (nuts and washers to inside of the drum). 2. Place the leg and crossbar section (C) over the drum and bolt (x4) in place (nuts and washers to inside of drum). 3. Screw the black knob (D) onto the rotary handle (E). 4. Slide the spring (F) up the rotary handle and hold in place. CRS400 Rotary Seive.fm Page 2 Wednesday, November 16, 2011 11:20 AM
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com 5. Pass the rotary handle (E) through the hole in the crossbar (C). 6. Feed the rotary handle into the tube of the rotary arm (H), (sleeve uppermost), and secure with the nut, bolt and washer. 7. Push end of the rotary handle through the hole in mesh. OPERATING INSTRUCTIONS INSTRUCTIONS FOR SIFTING COMPOST/SOIL: 1. First make sure the rotary sieve is placed over where you need the compost placing or alternatively over a wheelbarrow 2. Make sure that the compost or other matter is not too wet for sifting. 3. Fill the rotary sieve ha lf full with compost/soil. 4. Turn the handle until all small particle s have been sifted through the sieve. 5. This material can then be used. Th e remainder still in the sieve can be returned to the compost pile for further composting. INSTRUCTIONS FOR WEEDING: 1. Dig up the area that is full of weeds and place weed clumps with soil attached into the rotary sieve.
- Do not fill more than half way. 2. Place the rotary sieve over the area you want the soil to fall back on to or over a wheel barrow. 3. Move the rotary handle back and forth to separate the soil from the weeds. The soil will fall through the sieve base. 4. The remainder left in the sieve can be disposed of or composted. CRS400 Rotary Seive.fm Page 3 Wednesday, November 16, 2011 11:20 AM
CRS400 Rotary Seive.fm Page 4 Wednesday, November 16, 2011 11:20 AM