HLG10 HITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
-5- H HiTRON AC/DC EXTERNAL WALLMOUNT ADAPTER 2-BLADE AND EUROPEAN AC PLUG SINGLE OUTPUT 5-10 WATTS LOW LEAKAGE & GREEN POWER SWITCHING POWER SUPPLIES HLG10 SERIES SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-264Vac typical. Input Connector: WM1(USA)/WM3 (Euro-Stecker)/ WM5(UK) Input Frequency: 50/60Hz. Inrush Current: 3.371Arms@230Vac/50Hz. Input Current: 0.2A@115Vac, 0.09A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR EN 55022/FCC Class B. Hold-up Time: 11.2mS@115Vac, 70.4mS@230Vac typ. Green Power: 0.2W @132Vac, 0.25W@264Vac typical. Leakage Current: IEC 60950-1 Touch Current 0.02mA. FEATURES: VERY SMALL & COMPACT IN SIZE LOW LEAKAGE & LOW WAITING POWER EMI MEET EN 55022/FCC CLASS B MEET USA, JAPAN & EUROPEAN SAFETY STANDARDS CE MARKING COMPLIANCE GENERAL SPECIFICATION Efficiency: 71-75% typical. Switching Frequency: 60 KHz. Circuit Topology: PWM IC Fixed Flyback Circuit. Transient Response: Output voltage returns in less than 1mS following a 25% load change. Safety Standard: Meet UL60950-1 Class II. Power Density: 0.93-1.86 Watts/Cubic inch. Operating Temperature: 0 to +25/35/40°C without derating. (various with output voltage) Storage Temperature: -20 to +85°C. Temperature Coefficient: 0.04%/°C typical. Cooling: Free air convection. Construction: Impact resistant plastic enclosure case wallmount format. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varie d from half load to full load (±%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. (4) Due to requests in market and advances in technology, specifications subject to change without notice. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 5-10 Watts typical. Output Connector: Optional. Line Regulation: 1.0 % typical. Load Regulation: ± 5 % typical. Noise & Ripple: 1% typical peak to peak. OVP: Built-in. (Zener). Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. For the details of safety approval, please consult the factory.
-6- OUTPUT VOLTAGE/CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) OUTPUT VOLTAGE (Vdc) / CURRENT (A) 3.3Vdc ≤ Any Voltage ≤ 9.0Vdc Note: Refer to the upper Chart or consult factory for the exact Model No. and V/A ratings. SINGLE OUTPUT (Model No. for example.) O/P CURRENT MODEL NO. AC PLUG O/P VOLTAGE Min. Typ. Max. Peak HLG10-330250-1 WM1 3.30Vdc 0A 2.5A 2.5A 2.5A HLG10-330250-3 WM3 3.30Vdc 0A 2.5A 2.5A 2.5A HLG10-500200-1 WM1 5.00Vdc 0A 2.0A 2.0A 2.0A HLG10-500200-5 WM5 5.00Vdc 0A 2.0A 2.0A 2.0A HLG10-515200-1 WM1 5.15Vdc 0A 2.0A 2.0A 2.0A HLG10-515200-3 WM3 5.15Vdc 0A 2.0A 2.0A 2.0A HLG10-515200-5 WM5 5.15Vdc 0A 2.0A 2.0A 2.0A HLG10-600160-1 WM1 6.00Vdc 0A 1.6A 1.6A 1.6A HLG10-600160-3 WM3 6.00Vdc 0A 1.6A 1.6A 1.6A HLG10-900110-3 WM3 9.00Vdc 0A 1.1A 1.1A 1.1A HLG10-900110-5 WM5 9.00Vdc 0A 1.1A 1.1A 1.1A HLG10-515100-1(I) WM1 5.15Vdc 0A 1.0A 1.0A 1.0A HLG10-515200-1(I) WM1 5.15Vdc 0A 2.0A 2.0A 2.0A Remark: Models can be followed by a suffix (I) to indicate an additional input choke. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 133.6g(4.71Oz.)