HDM09-S HITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
-19- H HiTRON PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES
9 WATTS SINGLE & DUAL OUTPUT HDM09-S & HDM09-D SERIES
FEATURES: LOW COST SINGLE & DUAL OUTPUT 2:1 INPUT RANGE 9W ISOLATED OUTPUT SIX-SIDED METAL SHIELD OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Voltage Accuracy: Main O/P ±2.0% typical. Line Regulation: Various with output voltages. ±0.5% typ. Load Regulation: Various with output voltages. Single O/P ±1.0% typical. Dual O/P ±2.0% typical. Noise & Ripple: Typical 100mV for 3.3V/5.0V & 1.0% for others peak to peak. OVP: Built-in on main output. Adjustability: Not available. Overload Protection (OLP): Fully protected against output overload and short circuit. Typical 120-150% max. load. Consult the factory for special OLP setting. SPECIFICATION INPUT SPECIFICATION Input Range: 2:1 DC input range. See Ratings Chart. Input Voltage: Nominal 12/24/48 Vdc. Input Current: Various with input range & load. See Ratings Chart. Input Fuse: Use external fuse. Input Filter: Pi-Network. Isolation Resistance: 1,000 Mega Ohms. Isolation Voltage: 1,500Vdc. EMI: Six-sided metal shielding. GENERAL SPECIFICATION Efficiency: 65-75% typical various with input. Switching Frequency: 40-70K Hz., various with input and loading condition. Circuit Topology: Free Running Flyback Circuit. Transient Response: Peak deviation 200mV. Recovery time < 3mS for a 25% load change. Case: Black coated steel with non-conductive metal base. Power Density: 5.6Watts. / Cubic inch. MTBF: 1,000,000 hours. Mil Std 217, 25°C. Operating Temperature: -10°C to +70°C range. 0°C to +60°C @ full load without derating. From+60°C, derating lineally to half load@ +70°C. (Refer to the Derating Chart). Temperature: -20°C to +85°C. Temperature Coefficient: ± 0.03% /°C. Cooling: Convection cooling up to +60°C @ full load. At least 100LFM moving air is recommended for Full load > +60°C in a confined area. Humidity: Up to 95%RH, Non-condensing. Commercial Grade only. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Line Regulation measured from High to Low Lines at full load. (3) Load Regulation measured from Full Load to 1/2 Full Load at nominal input. (4) Correct fuse size by calculating the max. DC current drain at low Line input & Load and then adding 20-25% for the desired fuse size. Due to requests in market and advances in technology, specifications subject to change without notice.
-20- INPUT/ OUTPUT & VOLTAGE/ CURRENT RATINGS CHART SINGLE OUTPUT INPUT CURRENTMODEL NO. INPUT Vdc N. L. (mA) F.L. OUTPUT ★ VO1(Vdc) OUTPUT VO1(A) CASE SIZE HDM09-12B-S03 9.0- 18.0 60 650 3.3V 1.65A DM2B HDM09-12B-S05 9.0- 18.0 60 930 5.0V 1.65A DM2B HDM09-12B-S09 9.0- 18.0 60 950 9.0V 0.95A DM2B HDM09-12B-S12 9.0- 18.0 60 940 12.0V 0.70A DM2B HDM09-12B-S15 9.0- 18.0 60 990 15.0V 0.60A DM2B HDM09-12B-S24 9.0- 18.0 60 1060 24.0V 0.40A DM2B HDM09-24B-S03 18.0- 36.0 35 325 3.3V 1.65A DM2B HDM09-24B-S05 18.0- 36.0 35 465 5.0V 1.65A DM2B HDM09-24B-S09 18.0- 36.0 35 475 9.0V 0.95A DM2B HDM09-24B-S12 18.0- 36.0 35 470 12.0V 0.70A DM2B HDM09-24B-S15 18.0- 36.0 35 495 15.0V 0.60A DM2B HDM09-24B-S24 18.0- 36.0 35 530 24.0V 0.40A DM2B HDM09-48B-S03 36.0- 72.0 20 163 3.3V 1.65A DM2B HDM09-48B-S05 36.0- 72.0 20 233 5.0V 1.65A DM2B HDM09-48B-S09 36.0- 72.0 20 238 9.0V 0.95A DM2B HDM09-48B-S12 36.0- 72.0 20 235 12.0V 0.70A DM2B HDM09-48B-S15 36.0- 72.0 20 247 15.0V 0.60A DM2B HDM09-48B-S24 36.0- 72.0 20 265 24.0V 0.40A DM2B DUAL OUTPUT INPUT CURRENT OUTPUT (Vdc) OUTPUT (A) MODEL NO. INPUT Vdc N. L. (mA) F.L. +VO1 ★ -VO2 ║ +VO1 -VO2 CASE SIZE Symbols: "★" OVP built-in. " ║" Double Feedback. MECHANICAL DIMENSIONS: M M [ I N C H E S ] W E I G H T : 62.5g (2.2 Oz.) DERATING CHART PIN ASSIGNMENT PIN NO. SINGLE DUAL PIN #1 -INPUT -INPUT PIN #2 + INPUT + INPUT PIN #3 DC-COM -VO2 PIN #4 PO PIN DC-COM PIN #5 VO1 + VO1 CASE SIZE: DM2B