HDH100-24B HITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

-37- H HiTRON ON-BOARD DC-DC CONVERTER HALF-BRICK BASE PLATE POWER MODULES INDUSTRIAL GRADE 100-150 WATTS SINGLE & DUAL OUTPUT HDH100-24B OR 48B-S & D SERIES FEATURES: „ SINGLE & DAUL OUTPUT „ WIDE 2:1 INPUT RANGE „ 1500VDC ISOLATION „ STANDARD HALF-BRICK PACKAGE „ HIGH-EFFICIENCY POWER MODULE „ UNDER-VOLTAGE LOCKOUT „ DESIGNED TO MEET INTERNATIONAL SAFETY STANDARDS GENERAL SPECIFICATION Efficiency: 83.8-87% typical, various with input. Switching Frequency: Fixed frequency 330K Hz. Circuit Topology: Forward Circuit. Transient Response: Peak deviation <220mV and recovers within 1mS after 25% load-change. Safety Standard: IEC60950 Class I. Case: Aluminum base plate with metal standoffs. Power Density: 36.0 Watts / Cubic inch. Industrial Grade. Operating Temperature: -40 to +100°C (base plate). Power derating details; please refer to the Derating Chart. Storage Temperature: -55 to +125 °C. Temperature Coefficient: ± 0.02%/°C. Humidity: Up to 95% RH, Non-Condensing. Cooling: At least 100LFM moving air is recommended for full load > 0°C in a confined area. Air flow vs. power derating details please refer to the Derating Chart. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise spec. (2) Line Regulation measured from High to Low Lines at full load. (3) Load Regulation measured from Full-Load (F-L) to Half-Load(H-L)at nominal input. (4) Correct fuse size by calculating the max. DC current drain at low Line input & adding 20-25% for desired fuse size. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 100-150W typical continuous. Line Regulation: Various with input & output voltages. ± 0.1% typical. Load Regulation: Various with output voltages. Single O/P: ±1.0% typical. Dual O/P: ±1.0% typical. Noise & Ripple: Typical 120mV, peak to peak. 1% rms. OVP: Built-in. Adjustability: Maybe external trimmed with fixed resistor or trimpot. Overload Protection (OLP): Fully protected against overload and short circuit. OLP set at typical 130% max. load. Consult the factory for special OLP setting. SPECIFICATION INPUT SPECIFICATION Input Range: Wide 2:1 Input DC Range 18-36Vdc. or 36-72Vdc Input Voltage: Nominal 24Vdc.or 48Vdc. Input Current: Typical 6.85A full load and 0.06A no-load @ 24Vdc nominal input. Typical 2.65A full load and 0.03A no-load @ 48Vdc nominal input. Input Fuse: Use external fuse. Inrush Current: 8A @ 24Vdc/4A @ 48Vdc Input Filter: Pi-Network for EMI suppression. Under-Voltage Protection (UVP): Lock-out activated at 17.8 Vdc input @ 24Vdc nominal input. 34-35.5Vdc@ 48Vdc nominal input Input Reflected Ripple Current: 28.4mA pk-pk @24 Vdc. Isolation Voltage: 1,500Vdc input-output. Remote On/Off: TTL/CMOS-Compatible input control. Positive Logic version for Standard set up: ON(Enable)=Open(or 2.5-5.0Vdc above-Vin) OFF(Disable)=Short(or 0-0.8Vdc above-Vin) Negative Logic version option available by adding a “N” suffix to the end of Model #. Remark :Logic input voltage reference to -Vin. Due to requests in market and advances in technology, specifications subject to change without notice.

-38- INPUT/OUTPUT & VOLTAGE/CURRENT RATINGS CHART MECHANICAL DIMENSIONS: M M [ I N C H E S ] W E I G H T : 73.0g (2.6 Oz.) SINGLE OUTPUT INPUT Vdc OUTPUT VO1 ★@ # MODEL NO. Range Nominal MIN. VOLT. TYP. HDH100-24B-S018300 18-36Vdc 24Vdc 0A 1.8Vdc 30A HDH100-24B-S025300 18-36Vdc 24Vdc 0A 2.5Vdc 30A HDH100-24B-S033300 18-36Vdc 24Vdc 0A 3.3Vdc 30A HDH100-24B-S050250 18-36Vdc 24Vdc 0A 5.0Vdc 25A HDH100-24B-S120120 18-36Vdc 24Vdc 0A 12.0Vdc 12A HDH100-24B-S150100 18-36Vdc 24Vdc 0A 15.0Vdc 10A HDH100-48B-S018300 36-72Vdc 48Vdc 0A 1.8Vdc 30A HDH100-48B-S025300 36-72Vdc 48Vdc 0A 2.5Vdc 30A HDH100-48B-S033300 36-72Vdc 48Vdc 0A 3.3Vdc 30A HDH100-48B-S050250 36-72Vdc 48Vdc 0A 5.0Vdc 25A HDH100-48B-S120120 36-72Vdc 48Vdc 0A 12.0Vdc 12A HDH100-48B-S150100 36-72Vdc 48Vdc 0A 15.0Vdc 10A DUAL OUTPUT HDH100-24B-D025B 18-36Vdc 24Vdc 2.0A 18A 2.5Vdc 25A 0A 18A 1.8Vdc 25A HDH100-24B-D033B 18-36Vdc 24Vdc 2.0A 17A 3.3Vdc 24A 0A 18A 1.8Vdc 25A HDH100-24B-D033C 18-36Vdc 24Vdc 2.0A 17A 3.3Vdc 24A 0A 15A 2.5Vdc 20A HDH100-24B-D050C 18-36Vdc 24Vdc 2.0A 14A 5.0Vdc 20A 0A 15A 2.5Vdc 20A HDH100-24B-D050D 18-36Vdc 24Vdc 2.0A 14A 5.0Vdc 20A 0A 12A 3.3Vdc 18A HDH100-48B-D025B 36-72Vdc 48Vdc 2.0A 18A 2.5Vdc 25A 0A 18A 1.8Vdc 25A HDH100-48B-D033B 36-72Vdc 48Vdc 2.0A 17A 3.3Vdc 24A 0A 18A 1.8Vdc 25A HDH100-48B-D033C 36-72Vdc 48Vdc 2.0A 17A 3.3Vdc 24A 0A 15A 2.5Vdc 20A HDH100-48B-D050C 36-72Vdc 48Vdc 2.0A 14A 5.0Vdc 20A 0A 15A 2.5Vdc 20A HDH100-48B-D050D 36-72Vdc 48Vdc 2.0A 14A 5.0Vdc 20A 0A 12A 3.3Vdc 18A Symbols: "★" OVP built-in. "#" Remote sensing. "@" Adjustable. Remarks: Peak output, less than 60Sec. With duty cycle <10%. PIN ASSIGNMENT PIN NO. SINGLE DUAL PIN# 1. +Vin +Vin PIN# 2. Remote ON/OFF Remote ON/OFF PIN# 3. CASE CASE PIN# 4. -Vin -Vin PIN# 5. DC COM. VO2 PIN# 6. -SENSE DC COM PIN# 7. VO1 ADJ. VO2 ADJ. PIN# 8. +SENSE VO1 PIN# 9. VO1 DC COM SINGLE O/P DUAL O/P DERATING CHART