HBFR113-S SEOUL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com Specification HBFR113-S CUSTOMER ApprovalApprovalDrawn SSC
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com
CONTENTS
- Absolute Maximum Ratings 2. Electro Characteristics 3. Outline Dimension 4. Electro-Optical characteristic Diagram 5. Rank division 6. Reliability tests 7. Packing 8. Soldering 9. Precaution for use
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com HBFR113-S HBFR113-S Description Features
- 1.6(W) X 0.8(D)X 0.5(T)mm
- Emitted Color : Red/Blue
- Red: 625 nm Blue: 470 nm - Small size suitable for compact appliances. - Surface-mounted chip LED device. - Pb-free and RoHS complaint component. - Tape and Reel packing. - Increases the life time of battery.
Applications
- Cellular phone’s keypad lightning
- Other decoration lighting
- Information Boards
- Lighting for Small Size Device.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 1. Absolute maximum ratings 2. Electro-Optical Characteristics 60Red 30Red 72Red ℃-40 ~ 100Tstg.Storage Temperature V5VRReverse Voltage mW Blue PdPower Dissipation ℃-30 ~ 85Topr.Operation Temperature mA Blue IFM *1Peak Forward Current mA Blue IFForward Current UnitValueSymbolParameter (Ta=25℃) *1 IFM conditions: Pulse width Tw≤0.1ms and Duty ratio≤1/10. 120Red -3020Red 10--Red 2.4Red 615 462 2.6 Min 635625Red Blue Blue Blue Blue Blue Color 475 3.3 Max 120 470 2.9 Typ ˚IF=5 ㎃2θ1/2Viewing Angle*3 VIF=5 ㎃VFForward Voltage nmIF=5 ㎃λD Dominant Wavelength mcdIF=5 ㎃IVLuminous Intensity*2 ㎂VR=5VIRReverse Current UnitConditionSymbolParameter- (Ta=25℃) *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 θ1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance : Iv ±10 %, λD ±2 nm, VF ±0.1 V)
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 3.Outline Dimension ( Tolerance: ±0.1, Unit: mm ) - Recommended Soldering Design 1.0 0.95 1.0 RedBlue * MATERIALS Au Plating Copper AlloyElectrodes Epoxy ResinEncapsulating Resin BT ResinPackage MATERIALSPARTS
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 4. Electro-Optical characteristic Diagram Forward Current vs. Forward Voltage (per die) (Ta=25 OC ) Relative Luminous Intensity vs Forward Current (Ta=25 OC ) 0.1 100 Blue Red Forward Current IF(mA) Forward Voltage VF(V) 0 5 10 15 20 25 30 100 120 140 160 180 200 Blue Red Intensity IV[mcd] For wa rd C urre nt IF(m A)
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com Ambient Temperature vs. Allowable Forward Current (per die) -25 0 25 50 75 100 Forward current IF[mA] Ambient temperature Ta[ o (Ta=25 OC ) Radiation Diagram
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 5. Rank Division 06470~475 (C) 05465~470 (B)615~635 04470~475 (C) 03465~470 (B)615~635 02470~475 (C) 01465~470 (B)615~635 1.70~2.40 (B) BlueREDBlueREDBlueRED Bin WLD[nm] (IF=5mA) Iv[mcd] (IF=5mA) VF[V] (IF=5mA)
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 6. Reliability Tests O.K0/22500 hr 85℃85%24hrs => Reflow 3 times(Max260℃10sec)=> thermal shock Reflow Test O.K0/22100,000cycle10mA, 2s, On/Off 60℃, 90%RH On-Off Operating Life of High Humidity Heat PassFlailedNoteConditionItem < Judging Criteria For Reliability Tests > < Initial ± 0.1VVf < Initial * 0.5Iv Criteria for JudgmentItem
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 7. Packing (1) Quantity: 4,000pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at10˚angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. Tolerance: ±0.2, Unit: ㎜ 0.2 4.0 2.0 1.751.5 180 4.0 0.50.950.5 11.4 3.5 8.0 1.85 (2.75)
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com
- Reel Packing Structure 제품명 SSC-HBFR113-S 수량 : 4000 SIZE(mm)TYPE 142 c CHIP LED Q'YT : 40,000EA PART : SSC-HBFR113-S CODE : DATE : LOT NO : SEOUL SEMICONDUCTOR CO.,LTD 7inch 245 a 220 b Aluminum Vinyl Bag Outer Box Reel *Material: Paper(SW3B(B)) 제품명 SSC-HBFR113-S 수량 : 4000 Acriche Semiconductor EcoLight a RoHS b MADE IN KOREATUV c
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 8. Soldering 10 sec. Max. Soldering time Condition 240℃ Max.Peak-Temperature 120 sec. Max.Pre-heat time 120~150℃Pre-heat Lead Solder 10 sec. Max. Soldering time Condition 260℃ Max.Peak-Temperature 120 sec. Max.Pre-heat time 150~200℃Pre-heat Lead Free Solder 260 C Max. 10 sec. Max. o 60sec. Max. Above 220 C 120sec. Max. Pre-heating 150~200 C1~5 C / sec. ooo o1~5 C / sec. Lead Solder 2.5~5 C / sec.o o o Pre-heating 120~150 C 120sec. Max. 60sec. Max. Above 200 C o240 C Max. 10 sec. Max. 2.5~5 C / sec. (1) Lead Solder (2) Lead-Free Solder Lead-frame Solder (3) Hand Soldering conditions Do not exceed 3 seconds at maximum 280ºC under soldering iron. (4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resign should be used. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Document No. : SSC-QP-7-07-24 (Rev.00) Rev. 00 Rev. 00 September 2008September 2008 www.ZLED.com www.ZLED.com 9. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5ºC ~30ºC Humidity : maximum 65%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; a. After opened and mounted the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40ºC Humidity : less than 30% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (11) The LEDs must be soldered within seven days after opening the moisture-proof packing. (12) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (13) The appearance and specifications of the product may be modified for improvement without notice.