HB320 SEOUL | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

Features

  • High flux output and high luminance
  • Designed for high current operation
  • Uniform color
  • Low profile and low thermal resistance
  • Packaged in tubes for use with automatic insertion equipment Application
  • Automotive exterior lighting
  • Electronic signs and signals
  • Channel letter / lighting
  • Decorative lighting
  • Specialty Lighting

-2- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) 0.5 1.4 7.62 ± 0.5 ANODE 3 ± 0.2 CATHODE CHAMFER 1.25 X 1.25 7.5 ± 0.5 4.4 1.5±0.2 0.76 ± 0.1 5.08 ± 0.2 7.62 ± 0.5 5.0° 2.5 ± 0.5 0.4 ± 0.2 5.08 ± 0.3

1.4 MAX

Unit : mm Outline Dimensions Notes : Protruded epoxy is 1.4mm maximum.

-3- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) Electro-Optical Characteristics ( Ta = 25ºC, IF=40mA ) 476470 nm464λdDominant Wavelength[3] lm/W-9-ŋoptOptical Efficiency V4.43.8-VFForward Voltage[4] ºC /W200RθJ-AThermal Resistance mcd-850-IVLuminous Intensity 60 deg.2θ½View Angle -1.40.7 µA-IRReverse Current (at VR = 5V) Max.Typ.Min. lmФV [2]Luminous Flux [1] Unit Value SymbolItem Absolute Maximum Ratings ( Ta = 25ºC ) mW176PDPower Dissipation V5VRReverse Voltage ºC260ºC for 5second [6]TSSolder Temperature ºC-30 ~ 85ToprOperating Temperature mA100IFP [5]Forward Peak Pulse Current ºC-40 ~ 100TstgStorage Temperature mA40IFDC Forward Current UnitValueSymbolItem Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.05V on forward voltage measurements [6] No closer than 1.5mm from the base of the stopper.

-4- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) Reliability Tests 0/221 time1kV, 1.5kΩ ; 100pFESD (Human Body Model) cycles Ta = -40ºC (15min) ~ 100º (15min) (Transfer time : 10sec, 1Cycle = 30min)Thermal Shock 0/22500hrsTa = 85ºC, RH = 85%, IF = 10mATemperature Humidity Operating 0/221000hrsTa = 85ºC, RH = 85%Temperature Humidity Storage 0/221000hrsTa = -40ºCLow Temperature Storage 0/221000hrsTa = 100ºCHigh Temperature Storage Failures 1 timeTs = 255 ± 5ºC, t = 4 ± 1secResistance to soldering Heat 1000hrsTa = 85ºC, IF = 10mAHigh Temperature Operating 1000hrsTa = -30ºC, IF = 40mALow Temperature Operating 1000hrsTa = RT, IF = 40mALife Test NoteConditionItem < Judging Criteria For Reliability Tests > LSL [2] X 0.5ФV USL X 2.0IR USL[1] X 1.2VF Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level.

-5- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) Characteristic Diagrams 100 Forward Current(mA) Forward Voltage [V] Ta= 25ºC 0 204 0 608 0 100 0.0 0.5 1.0 1.5 2.0 Relative Luminous Flux Forward Current [mA] Ta= 25ºC Forward Voltage vs. Forward Current Forward Current vs. Relative Flux -40 -20 0 20 40 60 80 100 Forward Current IF [mA] Ambient Temperature TA [ O Ta= 25ºC 0 204 0 608 0 100 464 466 468 470 472 474 476 Dominant Wavelength [nm] Forward Current [mA] Ta= 25ºC Forward Current vs. Dominant Wavelength Ambient Temperature vs. Forward Current

-6- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) 0 204 0 608 0 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Relative Luminousity Flux Ambient Temperature Ta[ o IF= 40mA 0 204 0 608 0 100 3.2 3.4 3.6 3.8 4.0 Forward Voltage [V] Ambient Temperature Ta[ o IF= 40mA Ambient Temperature vs. Forward Voltage Ambient Temperature vs. Relative Flux -90 -60 -30 0 30 60 90 0.0 0.2 0.4 0.6 0.8 1.0 Relative Luminous Intensity Off Axis Angle [deg.] Ta= 25ºC, IF= 40mA 400 500 600 700 0.0 0.5 1.0 Relative Emission Intensity Wavelength [nm] Ta= 25ºC, IF= 40mA DirectivitySpectrum

-7- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) Bin Code Description 61C Forward VoltageDominant WavelengthLuminous Flux Bin Code Available ranks 4684641 4724682 4764723 Max.Min.Bin Code Dominant Wavelength (nm) @ IF = 40mA 3.02.81 3.23.02 3.43.23 3.63.44 3.83.65 4.03.86 4.24.07 4.44.28 4.64.49 Max.Min.Bin Code Forward Voltage (V) @ IF = 40mA 13.010.0L 10.07.6K 7.65.8J 5.84.4H 4.43.4G 3.42.6F 2.62.0E 0.70.5A 1.41.0C 2.01.4D 1.00.7B Max.Min.Bin Code Flux (lm) @ IF = 40mA

-8- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) Packing 485±1 21600pcs/box (12packs/box) * Aluminum Sealing pack (in silica gel)1800pcs max/pack (30tubes max/pack) HXXXX QTY : 1800pcs LOT : 200X.XX.XX XXX SEOUL SEMICONDUCTOR CO., LTD OOO RANK 3.2 5.1 9.72 0.6 2.6 5.8 SEOUL SEMICONDUCTOR CO., LTD. HXXXX 60pcs BINOOO (21600pcs max/box) (12packs max/box) Unit : mm * Cardboard box (500x220x280) * Plastic tube 60pcs max/tube

-9- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) Soldering Profile 2) Hand Soldering conditions

  • Not more than 3 seconds at max. 350ºC, under Soldering iron. 3) Caution
  • Leadframes are silver plated copper alloy. This substance has a low thermal coefficient (easily conducts heat)
  • No closer than 1.5mm from the base of the stopper.
  • The LEDs must not be repositioned after soldering.
  • Do not apply any stress to the lead particularly when heat. 1) Recommended Wave Soldering Conditions / Profile
  • Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max).
  • Soldering heat to be at 255 ºC (260ºC max) for 4 seconds (5 seconds max.)
  • Soak time above 200 ºC is 5 seconds 0 2 4 6 8 10 1 2 1 4 16 18 2 0 22 24 26 2 8 30 3 2 34 36 10 0 15 0 20 0 25 0 30 0 Temperature [ O Ti m e [s ] PREHEAT 20s (60s Max) 85 ºC(120 ºC max) PEAK 4s (5s max) 255 ºC (260 ºC max) Note : In case the soldered products are reused in soldering process, we don’t guarantee the products.

-10- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) Precaution for Use 1) Storage

  • Before opening the package a. Avoid the absorption of moisture, we recommended to store High Flux LEDs in a dry box(or desiccator) with a desiccant . Otherwise, store them in the following environment: Temperature : 5℃~30℃ Humidity : 50% max. b. The products should be used in 3 months. It is recommended that the LEDs be used as soon as possible.
  • After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40℃, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 60±5℃
  • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering.
  • Avoid quick cooling
  • Leadframes are silver plated copper alloy. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Static Electricity
  • Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
  • All devices, equipment and machinery must be grounded properly. It is recommended that precautions should be taken against surge voltage to the equipment that mounts the LEDs.

-11- BLUE HIGH FLUX LED HB320 <061201> Rev. 1.4 서식번호 : QP-7-03-05 (Rev.00) 3) Heat Generation

  • Thermal is one of the important parameters to design the end product. Please consider the heat generation of the LEDs.
  • The operating current should be decided after considering the ambient maximum temperature of LEDs. 4) Others
  • The color of the LEDs is changed slightly an operating current and thermal.
  • Anti radioactive ray design is not considered for the products listed here.
  • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed.
  • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used.
  • When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5
  • The appearance and specifications of the product may be modified for improvement without notice. SEOUL SEMICONDUCTOR CO., LTD. 148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL : +82-2-3281-6269 FAX :+82-2-858-5537 Homepage : www.seoulsemicon.com www.zled.com E-Store : www.zledstore.com E-mail : sscsale@seoulsemicon.com