DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. SPECIFICATIONS OVER VIEW Parameter Value Unit Spectral response Input voltage Max. input voltage Max. input current * Max. output signal current *2 Max. control voltage Recommended control voltage adjustment range Effective area Peak sensitivity wavelength Luminous sensitivity Blue sensitivity index (CS 5-58) Red / White ratio Radiant sensitivity * Luminous sensitivity *2 Radiant sensitivity *2 *3 Dark current *2 *4 Rise time *2 Ripple noise *2 *5 (peak to peak) Settling time *6 Operating ambient temperature *7 Storage temperature *7 Weight Min. Typ. Typ. Typ. Typ. Min. Typ. Typ. Typ. Max. Max. Max. nm V V mA µA V V mm nm µA/lm mA/W A/lm A/W nA ns mV s g 300 to 650 +11.5 to +15.5 +18 5.0 200 +1.9 (Input impedance 1 MΩ) +0.5 to +1.8 (Input impedance 1 MΩ) 420 10.5 300 2.8 × 10 2.0 +5 to +50 -20 to +50 560 NOTE: *1: At +15 V input voltage, +1.75 control voltage, and output current equal to dark current *2: Control voltage=+1.75 V *3: Measured at the peak sensitivity wavelength *4: After 30 minutes storage in darkness, output of dark surrent. *5: Cable RG-174/U, Cable length 450 mm, Load resistance= 1 MΩ, Load capacitance=22 pF *6: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *7: No condensation CathodeAnode Standard type The H11411 is a photomultiplier tube module that inte- grates a 51-mm (2") diameter head-on photomultiplier tube with a high-voltage power supply circuit. The H11411 has a large effective photocathode area of 46 mm diameter and this product is suited for scintilation counting application. PHOTOMULTIPLIER TUBE MODULE H11411 GHigh energy physics GRadiation measurement GIndustrial measurement GFast time response
FEATURES
(at +25 °C)