GTVA262711FA-V2-R2

GTVA262711FA WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 9

Technical content

Features

• GaN on SiC HEMT technology
• Input matched
• Typical pulsed CW performance: 10 µs pulse width, 10% duty cycle, 2690 MHz, 48 V - Output power at P3dB = 300 W - Efficiency = 62% - Gain = 19.1 dB
• Human Body Model Class 1B (per ANSI/ESDA/ JEDEC JS-001)
• Capable of handling 10:1 VSWR @48 V, 70 W (CW) output power
• Pb-free and RoHS-compliant GTVA262711FA -60 -40 -20 25 30 35 40 45 50 55 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 48 V, IDQ = 320 mA, ƒ = 2690 MHz 3GPP WCDMA signal, 10 dB PAR

3.84 MHz bandwidth

PAR @ 0.01% CCDF g262711fa-gr1a RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed production test fixture) VDD = 48 V, IDQ = 320 mA, POUT = 70 W avg, ƒ = 2690 MHz. 3GPP WDMA signal, 3.84 MHz channel bandwidth, peak/average = 10 dB @ 0.01% CCDF Characteristic Symbol Min. Typ. Max. Unit Gain Gps 16 18 — dB Drain Efficiency hD 38 38.5 — % Adjacent Channel Power Ratio ACPR — –27.5 –25 dBc Output PAR @ 0.01% CCDF OPAR 5.7 6.3 — dB Note: All published data at TCASE = 25°C unless otherwise indicated ESD: Electrostatic discharge sensitive device—observe handling precautions!

Rev. 04.4, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 DC Characteristics Recommended Operating Conditions Maximum Ratings Parameter Symbol Value Unit Drain-source Voltage VDSS 125 V Gate-source Voltage VGS –10 to +2 Gate Current IG 32 mA Drain Current ID 12 A Junction Temperature TJ 225 Storage Temperature Range TSTG –65 to +150 Characteristic Symbol Value Unit Conditions Thermal Resistance RqJC 1.0 °C/W TCASE = 70 °C, 70 W (CW), VDD = 48 V, IDQ = 320 mA, 2690 MHz Characteristic Symbol Min. Typ. Max. Unit Conditions Drain-source Breakdown Voltage VBR(DSS) 150 — — V VGS = -8 V, ID = 32 mA Drain-source Leakage Current IDSS — — 4.5 mA VGS = -8 V, VDS = 10 V Gate Threshold Voltage VGS(th) –3.8 –3.0 –2.3 V VDS = 10 V, ID = 32 mA Parameter Symbol Min. Typ. Max. Unit Conditions Operating Voltage VDD 0 — 50 V Gate Quiescent Voltage VGS(Q) — –3.0 — VDS = 50 V, ID = 320 mA Thermal Characteristics Operation above the maximum values listed here may cause permanent damage. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. For reliable continuous operation, the device should be operated within the operating voltage range (VDD) specified above. Gate Quiescent Voltage’s (VGS(Q)) range can be estimated by adding +0.1 V to the Gate Threshold Voltage (VGS(th)) range.

Ordering Information

Type and Version Order Code Package Shipping GTVA262711FA V2 R0 GTVA262711FA-V2-R0 H-87265J-2 Tape & Reel, 50 pcs GTVA262711FA V2 R2 GTVA262711FA-V2-R2 H-87265J-2 Tape & Reel, 250 pcs

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 1. Single-carrier WCDMA Drive-up Figure 3. Single-carrier WCDMA Drive-up Figure 4. Single-carrier WCDMA Drive-up

3.84 MHz bankdwidth

Figure 2. Single-carrier WCDMA Drive-up

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 5. Single-carrier WCDMA Drive-up Figure 7. Single-carrier WCDMA Broadband Figure 8. CW Performance

2620 MHz

2655 MHz

2690 MHz

Figure 6. Single-carrier WCDMA Broadband

Rev. 04.4, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Evaluation Board, 2620 to 2690 MHz Evaluation Board Part Number L TN/GTVA262711FA-V2 PCB Information Rogers 4350, 0.508 mm [.020”] thick, 2 oz. copper, εr = 3.66 Find Gerber files for this test fixture on the Wolfspeed Web site at www.wolfspeed.com/RF g t v a 2 6 2 7 1 1 f a _ C D _ 0 2 - 0 8 - 2 0 1 7 - b n C 203 C 204 V DD R F_OUT C 207 C 201 C 202 C 205 C 206 R 101 R F_IN C 106 C 107 R 102 C 103 C 104 V G G C 101 C 102 GTVA262711FA_IN_01 R O4350, 20 MILR O4350, 20 MIL GTVA262711FA OUT_01 C 105 Reference circuit assembly diagram (not to scale)

Rev. 04.4, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Components Information Component Description Manufacturer P/N Input C101 Capacitor, 33 pF ATC ATC800A330JT250T C102 Capacitor, 1 µF TDK Corporation C4532X7R2A105M230KA C103 Capacitor, 10 µF TDK Corporation C5750X5R1H106K230KA C104 Capacitor, 100 µF Panasonic Electronic Components EEV-HD1V101P C105 Capacitor, 1.8 pF ATC ATC800A1R8CT250T C106, C107 Capacitor, 12 pF ATC ATC800A120JT250T L1 Inductor, 22 nH ATC 0805WL220JT R101 Resistor, 5.6 ohms Panasonic Electronic Components ERJ-8RQJ5R6V R102 Resistor, 10 ohms Panasonic Electronic Components ERJ-3GEY J100V Output C201 Capacitor, 1.1 pF ATC ATC800A1R1CT250T C202, C206 Capacitor, 12 pF ATC ATC800A120JT250T C203 Capacitor, 1 µF TDK Corporation C4532X7R2A105M230KA C204 Capacitor, 10 µF TDK Corporation C5750X5R1H106K230KA C205 Capacitor, 0.4 pF ATC ATC800A0R4CT250T C207 Capacitor, 220 µF Panasonic Electronic Components ECA-2AHG221 S G D H-37265J- 2_03_pd_20 16- 12-01-bn Pin Description D Drain Device G Gate Device S Source (flange) Pinout Diagram (top view) Lead connections for GTVA262711FA Bias Sequencing Bias On 1. Ensure RF is turned off 2. Apply pinch-off voltage of –5 V to the gate 3. Apply nominal drain voltage 4. Bias gate to desired quiescent drain current 5. Apply RF Bias Off 1. Turn RF off 2. Apply pinch-off voltage to the gate 3. Turn-off drain voltage 4. Turn-off gate voltage

Rev. 04.4, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications – Package H-87265J-2 Diagram Notes—unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances ± 0.127 [.005] unless specified otherwise. 4. Pins: D – drain; G – gate; S – source. 6. Gold plating thickness: 1.14 ± 0.38 micron [45 ± 15 microinch]. CL LC D G 6.35 [.250] LID 10.16±.25 [.400±.010] 45° X .64 [.025] 2.59±.51 [.102±.020] 10.16±.25 [.400±.010] SPH 1.57 [.062] 1.02 [.040] S (15.34 [.604]) 3.63±.38 [.143±.015] H-87265J-2_po-03_03-03-2017-bnFLANGE R0.63 [R.025] MAX FLANGE 10.16 ± 0.191 [.400 ± .0075] 10.16 ± 0.191 [.400 ± .0075] Diagram Notes—unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994 2. Primary dimensions are mm; alternate dimensions are inches 3. All tolerances ± 0.127 [.005] 4. Pins: D – drain; G – gate; S – source 6. Gold plating thickness: 1.14 ± 0.38 micron [45 ± 15 microinch]

Rev. 04.4, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. For more information, please contact:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com Notes & Disclaimer Specifications are subject to change without notice. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for information purposes only. Wolfspeed products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed.