GPTR4260 GPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Phone: +39-011-988 2251 Fax: +39-011-988 1358 http://gpsemi.it/pdf/GPTR4260.pdf GPTR4260 PHASE CONTROLLED SCR High reliability operation DC power supply Controlled rectifiers DC drives - Motor starters BLOCKING VOLTAGE UP TO 3600 V AVERAGE CURRENT 2600 A SURGE CURRENT 39 kA BLOCKING CHARACTERISTICS Characteristic Conditions VRRM Repetitive peak reverse voltage 3600 V VRSM Non-repetitive peak reverse voltage 3600 V VDRM Repetitive peak off-state voltage 3700 V IDRM Repetitive peak off-state current, max. VDRM, single phase, half wave, Tj = Tjmax 300 mA IRRM Repetitive peak reverse current, max. VRRM, single phase, half wave, Tj = Tjmax 300 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 2600 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, Th = 55 °C 4090 A ITSM Surge on-state current Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 39 kA I²t I² t for fusing coordination 7605 kA²s VT(TO) Threshold voltage Tj = Tjmax 1.15 V rT On-state slope resistance Tj = Tjmax 0.220 mW VTM Peak on-state voltage, max On-state current IT = 2000 A , Tj = Tjmax 1.59 V IH Holding current, max Tj = 25 °C 300 mA IL Latching current, typ Tj = 25 °C 1500 mA TRIGGERING CHARACTERISTICS VGT Gate trigger voltage Tj = 25 °C, VD = 12 V 3 V IGT Gate trigger current Tj = 25 °C, VD = 12 V 300 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0.35 V PGM Peak gate power dissipation Pulse width 0.5 ms 50 W PG(AV) Average gate power dissipation 5 W IFGM Peak gate current 10 A VFGM Peak gate voltage (forward) 10 V VRGM Peak gate voltage (reverse) 5 V SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Tj = Tjmax 200 A/µs dV/dt Critical rate of rise of off-state voltage Tj = Tjmax 1000 V/µs tq Turn-off time, typ Tj = Tjmax, IT = 2300 A, di/dt = -10 A/µs µs VR = 100 V, VD = 67% VDRM, dV/dt = 50 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0.009 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0.002 °C/W Tjmax Max operating junction temperature 125 °C Tstg Storage temperature -40 / 125 °C F Clamping force ± 10% 40 / 50 kN Mass 1500 g Document GPTR4260T002 Value Green Power Solutions Srl Web: www.gpsemi.it e-mail: info@gpsemi.it
PHASE CONTROLLED SCR GPTR4260 VV: blocking voltage / 100 (e.g. 36 for 3600 V) G: trigger lead type (S = straight T = twisted blank = no leads) L: trigger lead lenght x 100mm (3 - 4 - 5 - 7 blank = no leads) Document GPTR4260T002 1000 2000 3000 4000 5000 6000 0 0.5 1 1.5 2 2.5 IT [A] VT [V] On-state voltage drop Tj=Tjmax 500 1000 1500 2000 2500 IT [A] VT [V] On-state voltage drop Tj=Tjmax 1 10 100 ITSM [A] Number of cycle current pulses [n] Maximum surge current d.s. cooled 0.001 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.001 0.01 0.1 1 10 100 ZTH(j-c) [°C / W] Time [s] Thermal impedance (j-c) In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this datasheet without notice. 100 110 120 130 0 400 800 1200 1600 2000 2400 2800 Heatsink temperature [°C] IT [A] Current rating - sine wave 180°90° 120°60°30° 1000 2000 3000 4000 5000 6000 7000 0 400 800 1200 1600 2000 2400 2800 PF [W] IT[A] Power loss - sine wave 180° 120°90° 60° 30° dimensions mm