GPTP3127_17 GPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Phone: +39-011-988 2251 Fax: +39-011-988 1358 http://gpsemi.it/pdf/GPTP3127.pdf GPTP3127 PHASE CONTROLLED SCR High reliability operation DC power supply AC drives VOLTAGE UP TO 2600 V AVERAGE CURRENT 1270 A SURGE CURRENT 19 kA BLOCKING CHARACTERISTICS Characteristic Conditions VRRM Repetitive peak reverse voltage 2600 V VRSM Non-repetitive peak reverse voltage 2700 V VDRM Repetitive peak off-state voltage 2600 V IDRM Repetitive peak off-state current, max. VDRM, single phase, half wave, Tj = Tjmax 50 mA IRRM Repetitive peak reverse current, max. VRRM, single phase, half wave, Tj = Tjmax 50 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 1270 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, Th = 55 °C 1995 A ITSM Surge on-state current Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 19 kA I²t I² t for fusing coordination 1805 kA²s VT(TO) Threshold voltage Tj = Tjmax 1.15 V rT On-state slope resistance Tj = Tjmax 0.31 mW VTM Peak on-state voltage, max On-state current IT = 2900 A , Tj = 25 °C 2.0 V IH Holding current, max Tj = 25 °C 300 mA IL Latching current, typ Tj = 25 °C 700 mA TRIGGERING CHARACTERISTICS VGT Gate trigger voltage Tj = 25 °C, VD = 5 V 3.5 V IGT Gate trigger current Tj = 25 °C, VD = 5 V 300 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0.25 V PGM Peak gate power dissipation Pulse width 100 µs 150 W PG(AV) Average gate power dissipation 2 W IFGM Peak gate current 10 A VFGM Peak gate voltage (forward) 30 V VRGM Peak gate voltage (reverse) 5 V SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Tj = Tjmax 200 A/µs dV/dt Critical rate of rise of off-state voltage Tj = Tjmax 1000 V/µs tq Turn-off time, typ Tj = Tjmax, IT = 1000 A, di/dt = -20 A/µs µs VR = 50 V, VD = 67% VDRM, dV/dt = 20 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0.020 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0.006 °C/W Tjmax Max operating junction temperature 125 °C Tstg Storage temperature -40 / 125 °C F Clamping force 18 / 20 kN Mass 500 g Document GPTP3127T002 Value Green Power Solutions Srl Web: www.gpsemi.it e-mail: info@gpsemi.it
PHASE CONTROLLED SCR GPTP3127 VV: blocking voltage / 100 (e.g. 26 for 2600 V) G: trigger lead type (S = straight T = twisted blank = no leads) L: trigger lead lenght x 100mm (3 - 4 - 5 - 7 blank = no leads) Document GPTP3127T002 1 10 100 ITSM [A] Number of cycle current pulses [n] Maximum surge current d.s. cooled 0.005 0.01 0.015 0.02 0.025 0.001 0.01 0.1 1 10 100 ZTH(j-c) [°C / W] Time [s] Thermal impedance (j-c) 100 110 120 130 0 200 400 600 800 1000 1200 1400 Heatsink temperature [°C] IT [A] Current rating - sine wave 180°90° 120°60°30° 500 1000 1500 2000 2500 3000 0 200 400 600 800 1000 1200 1400 PF [W] IT[A] Power loss - sine wave 180° 120°90° 60° 30° In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this datasheet without notice. 500 1000 1500 2000 2500 3000 0.5 1 1.5 2 IT [A] VT [V] On-state voltage drop Tj=Tjmax dimensions mm