GPTN3084_17 GPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Phone: +39-011-988 2251 Fax: +39-011-988 1358 http://gpsemi.it/pdf/GPTN3084.pdf GPTN3084 PHASE CONTROLLED SCR High reliability operation DC power supply AC drives VOLTAGE UP TO 2400 V AVERAGE CURRENT 840 A SURGE CURRENT 11 kA BLOCKING CHARACTERISTICS Characteristic Conditions VRRM Repetitive peak reverse voltage 2400 V VRSM Non-repetitive peak reverse voltage 2500 V VDRM Repetitive peak off-state voltage 2400 V IDRM Repetitive peak off-state current, max. VDRM, single phase, half wave, Tj = Tjmax 50 mA IRRM Repetitive peak reverse current, max. VRRM, single phase, half wave, Tj = Tjmax 50 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 840 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, Th = 55 °C 1319 A ITSM Surge on-state current Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 11 kA I²t I² t for fusing coordination 605 kA²s VT(TO) Threshold voltage Tj = Tjmax 1.10 V rT On-state slope resistance Tj = Tjmax 0.552 mW VTM Peak on-state voltage, max On-state current IT = 2000 A , Tj = Tjmax 2.20 V IH Holding current, max Tj = 25 °C 300 mA IL Latching current, typ Tj = 25 °C 700 mA TRIGGERING CHARACTERISTICS VGT Gate trigger voltage Tj = 25 °C, VD = 5 V 3.5 V IGT Gate trigger current Tj = 25 °C, VD = 5 V 250 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0.3 V PGM Peak gate power dissipation Pulse width 1 ms 150 W PG(AV) Average gate power dissipation 2 W IFGM Peak gate current 10 A VFGM Peak gate voltage (forward) 30 V VRGM Peak gate voltage (reverse) 5 V SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Non rep. - Tj = Tjmax 200 A/µs dV/dt Critical rate of rise of off-state voltage Tj = Tjmax 1000 V/µs tq Turn-off time, typ Tj = Tjmax, IT = 2000 A, di/dt = -5 A/µs µs VR = 200 V, VD = 67% VDRM, dV/dt = 20 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0.03 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0.007 °C/W Tjmax Max operating junction temperature 125 °C Tstg Storage temperature -40 / 125 °C F Clamping force ± 5% 12 kN Mass 300 g Document GPTN3084T002 Value Green Power Solutions Srl Web: www.gpsemi.it e-mail: info@gpsemi.it
PHASE CONTROLLED SCR GPTN3084 VV: blocking voltage / 100 (e.g. 24 for 2400 V) G: trigger lead type (S = straight T = twisted blank = no leads) L: trigger lead lenght x 100mm (3 - 4 - 5 - 7 blank = no leads) Document GPTN3084T002 1 10 100 ITSM [A] Number of cycle current pulses [n] Maximum surge current d.s. cooled 200 400 600 800 1000 1200 1400 1600 1800 0 0.5 1 1.5 2 2.5 IT [A] VT [V] On-state voltage drop Tj=Tjmax 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.001 0.01 0.1 1 10 100 ZTH(j-c) [°C / W] Time [s] Thermal impedance (j-c) 100 110 120 130 0 200 400 600 800 Heatsink temperature [°C] IT [A] Current rating - sine wave 180°90° 120°60°30° 200 400 600 800 1000 1200 1400 1600 1800 2000 0 200 400 600 800 PF [W] IT[A] Power loss - sine wave 180° 120°90° 60° 30° In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this datasheet without notice. 200 400 600 800 1000 1200 1400 1600 1800 0.5 1 1.5 2 2.5 3 IT [A] VT [V] On-state voltage drop Tj=Tjmax dimensions mm